Cells-on-nanofibers: Effect of polyethyleneimine on hydrophobicity of poly-Ɛ-caprolacton electrospun nanofibers and immobilization of bacteria.

Among other synthetic polymers, poly-Ɛ-caprolacton (PCL) nanofibers are one of the most popular ones, especially in tissue engineering application due to its distinct mechanical and chemical properties. However, in some cases, lacking functional group on polymer structure obstructs the covalent modification of the PCL nanofibers for the aim. Herein, polyethyleneimine (PEI) was blended with PCL polymer to provide functional amino groups on the surface of the nanofiber mat. PCL-PEI nanofiber was successfully constructed and preparation parameters were optimized. Scanning electron microscopy (SEM) and contact angle measurements were carried out to characterize the PCL-PEI nanofiber. After characterization, Gluconobacter oxydans was immobilized on the surface by the help of glutaraldehyde chemistry. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements were carried out to prove the success of surface modification. In addition, scanning electron microscopy images were also taken after the immobilization of G. oxydans on PCL-PEI nanofiber mat. For the first time in this study, one microorganism was immobilized onto the electrospun nanofiber mat by covalent modification. In conclusion, PCL-PEI/G. oxydans whole-cell biosensor was tested for sensing of glucose as a model analyte.

Copolymer based multifunctional conducting polymer film for fluorescence sensing of glucose.

A simple, rapid and effective fluorescence sensing platform has been fabricated using a fluorescent conducting polymer surface. For this purpose, a rhodamine based electroactive monomer (RDC) and a functional group containing monomer (SNS) have been copolymerized to develop a conducting polymer based sensor platform having a fluorescence and enzyme-binding surface on ITO electrode. The proposed fluorescence sensing mechanism for detection of glucose is related to the consumption of dissolved oxygen at the double layer of the electrode which is fluorescence quenching agent by glucose-GOx reaction. Concentration of glucose was investigated quantitatively from 0.05 to 1 mM via fluorescence signal measurement. This novel approach could be adapted for the production of various rapid and effective fluorescence sensing platforms for glucose.

Biofunctionalization of PAMAM-montmorillonite decorated poly (Ɛ-caprolactone)-chitosan electrospun nanofibers for cell adhesion and electrochemical cytosensing.

The construction and biofunctionalization of the poly (Ɛ-caprolactone) (PCL)-chitosan (CHIT) nanofibrous mats, which included Polyamidoamine (PAMAM) dendrimer modified montmorillonite (Mt), for the cell adhesion and electrochemical cytosensing were accomplished in this report. After the intercalation of the PAMAM generation zero dendrimer into the Mt, PAMAM-Mt decorated PCL-CHIT electrospun nanofibers were formed. The addition of PAMAM caused the decrease of contact angle of PCL-CHIT nanofibers. The covalent immobilization of a tripeptide namely Arginylglycylaspartate (RGD) on both the PCL-CHIT/Mt and PCL-CHIT/PAMAM-Mt surface was carried out. U87-MG and HaCaT (negative control) cell lines were incubated on the PCL-CHIT/Mt/RGD and PCL-CHIT/PAMAM-Mt/RGD. The proliferation studies and imaging of the cells were carried out on these fibers. Finally, electrochemical measurements were performed after each modification step by differential pulse/cyclic voltammetry and electrochemical impedance spectroscopy. U87-MG cells were grown better than HaCaT cells on the PCL-CHIT/PAMAM-Mt/RGD surfaces. To the best of our knowledge, there is no study that developed electrochemical cytosensor using electrospun nanofibers as a cell adhesion platform.

Rhodamine-based conjugated polymers: potentiometric, colorimetric and voltammetric sensing of mercury ions in aqueous medium.

Herein, we report the synthesis and characterization of a new rhodamine-based monomer (RD-CZ), and an investigation of the optical and electrochemical properties of the corresponding polymer (P(RD-CZ)), which was electropolymerized on an ITO electrode. The resulting P(RD-CZ) polymer film was used as a simple and novel multi-signal sensor platform, which demonstrates ion-selective potentiometric, colorimetric and voltammetric responses in aqueous media for the first time. P(RD-CZ) exhibits excellent selectivity for Hg2+ ions compared with Cd2+, Cu2+ Zn2+, and Fe3+ using the potentiometric technique, which depends on the increasing charge carrier transport through rhodamine-bound Hg2+ with a limit of detection (LOD) of 9.77 × 10-8 M. The P(RD-CZ) polymer film also exhibits a distinct color change from orange to purple, which is detectable even by the naked eye, in the presence of Hg2+ ions. The LOD for Hg2+ ions obtained using the colorimetric method is 3.16 × 10-8 M. The same material has also been used for the voltammetric sensing of Hg2+ in aqueous media with a detection limit of 1 × 10-7 M. In this study, a conductive polymer-based sensor platform for detecting mercury ions via three different methods has been designed for the first time. By doing so, a disposable planar paper-based ion-sensing platform, which is suitable for low-cost point-of-care and in-field testing applications, could be fabricated with a highly reproducible and linear response towards different concentrations of analyte ions in aqueous and biological samples.

Bioconjugation and Applications of Amino Functional Fluorescence Polymers.

Synthesis and novel applications of biofunctional polymers for diagnosis and therapy are promising area involving various research domains. Herein, three fluorescent polymers, poly(p-phenylene-co-thiophene), poly(p-phenylene), and polythiophene with amino groups (PPT-NH2 , PPP-NH2 , and PT-NH2 , respectively) are synthesized and investigated for cancer cell targeted imaging, drug delivery, and radiotherapy. Polymers are conjugated to anti-HER2 antibody for targeted imaging studies in nontoxic concentrations. Three cell lines (A549, Vero, and HeLa) with different expression levels of HER2 are used. In a model of HER2 expressing cell line (A549), radiotherapy experiments are carried out and results show that all three polymers increase the efficacy of radiotherapy. This effect is even more increased when conjugated to anti-HER2. In the second part of this work, one of the selected polymers (PT-NH2 ) is conjugated with a drug model; methotrexate via pH responsive hydrazone linkage and a drug carrier property of PT-NH2 is demonstrated on neuroblastoma (SH-SY5Y) cell model. Our results indicate that, PPT-NH2 , PPP-NH2 , and PT-NH2 have a great potential as biomaterials for various bioapplications in cancer research.

Complex Structured Fluorescent Polythiophene Graft Copolymer as a Versatile Tool for Imaging, Targeted Delivery of Paclitaxel, and Radiotherapy.

Advances in polymer chemistry resulted in substantial interest to utilize their diverse intrinsic advantages for biomedical research. Especially, studies on drug delivery for tumors have increased to a great extent. In this study, a novel fluorescent graft copolymer has been modified by a drug and targeting moiety and the resulting structure has been characterized by alterations in fluorescent intensity. The polythiophene based hybrid graft copolymer was synthesized by successive organic reactions and combination of in situ N-carboxy anhydride (NCA) ring opening and Suzuki coupling polymerization processes. Initially, targeted delivery of the graft copolymer was investigated by introducing a tumor specific ligand, anti-HER2/neu antibody, on the structure. The functionalized polymer was able to differentially indicate HER2-expressing A549 human lung carcinoma cells, whereas no signal was obtained for Vero, monkey kidney epithelial cells, and HeLa, human cervix adenocarcinoma cells. After integrating paclitaxel into the structure, cell viability, cell cycle progression, and radiosensitivity studies demonstrate HER2/neu targeting polymers were most effective to inhibit cell proliferation. Importantly, the graft copolymer used had no cytotoxic effects to cells, as evidenced by cell viability and cell cycle analysis. This work clearly confirms that a specially designed and fabricated graft copolymer with a highly complex structure is a promising theranostic agent capable of targeting tumor cells for diagnostic and therapeutic purposes.

Poly(p-phenylene) with Poly(ethylene glycol) Chains and Amino Groups as a Functional Platform for Controlled Drug Release and Radiotherapy.

Conventional cancer treatments such as chemotherapy, radiotherapy, or combination of these two result in side effects, which lower the quality of life of the patients. To overcome problems with these methods, altering the drug properties by conjugating them to carrier polymers has emerged. Such polymeric carriers also hold the potential to make tumor cells more sensitive to radiation therapy. Herein, poly(p-phenylene) (PPP) polymer with poly(ethylene glycol) (PEG) chains and primary amino groups (PPP-NH2 -g-PEG) is synthesized and conjugated with anticancer drug Doxorubicin (DOX). pH dependent drug release experiments are performed at pH 5.3 and pH 7.4, respectively. Cell viability studies on human cervix adenocarcinoma cells show that lower doses of DOX inhibit cell proliferation when conjugated with nontoxic doses of PPP-NH2 -g-PEG polymer. Additionally, PPP-NH2 -g-PEG/Cys/DOX bioconjugate significantly increases radiosensitive properties of DOX. It is possible to use lower doses of DOX when conjugated to PPP-NH2 -g-PEG in combination with radiotherapy.

Folic-Acid-Modified Conducting Polymer: Electrochemical Detection of the Cell Attachment.

Here, postfunctionalization and bioapplication of a π-conjugated polymer named 4-[4H-dithieno(3,2-b:2',3'-d)pyrrol-4-yl]aniline (DTP-aryl-NH2 ) are reported, which is successfully synthesized via electropolymerization onto the glassy carbon electrode. Folic acid (FA) is used to modify the amino functional polymer via N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide chemistry for the further steps. The selective adhesion of folate receptor positive cells on the surface is followed by the electrochemical methods. Cyclic voltammetry and electrochemical impedance spectroscopy have been used to characterize stepwise modification of the electroactive surface. After optimization studies such as scan rate during the polymer deposition, FA amount for the efficient surface targeting, incubation time with the cells etc., analytical characterization is carried out. The surface morphologies at each step are imaged by using fluorescence microscopy.

Nanostructured Amphiphilic Star-Hyperbranched Block Copolymers for Drug Delivery.

A robust drug delivery system based on nanosized amphiphilic star-hyperbranched block copolymer, namely, poly(methyl methacrylate-block-poly(hydroxylethyl methacrylate) (PMMA-b-PHEMA) is described. PMMA-b-PHEMA was prepared by sequential visible light induced self-condensing vinyl polymerization (SCVP) and conventional vinyl polymerization. All of the synthesis and characterization details of the conjugates are reported. To accomplish tumor cell targeting property, initially cell-targeting (arginylglycylaspactic acid; RGD) and penetrating peptides (Cys-TAT) were binding to each other via the well-known EDC/NHS chemistry. Then, the resulting peptide was further incorporated to the surface of the amphiphilic hyperbranched copolymer via a coupling reaction between the thiol (-SH) group of the peptide and the hydroxyl group of copolymer by using N-(p-maleinimidophenyl) isocyanate as a heterolinker. The drug release property and targeting effect of the anticancer drug (doxorobucin; DOX) loaded nanostructures to two different cell lines were evaluated in vitro. U87 and MCF-7 were chosen as integrin αvß3 receptor positive and negative cells for the comparison of the targeting efficiency, respectively. The data showed that drug-loaded copolymers exhibited enhanced cell inhibition toward U87 cells in compared to MCF-7 cells because targeting increased the cytotoxicity of drug-loaded copolymers against integrin αvß3 receptor expressing tumor cells.

Ferrocene-functionalized 4-(2,5-Di(thiophen-2-yl)-1H-pyrrol-1-yl)aniline: a novel design in conducting polymer-based electrochemical biosensors.

Herein, we report a novel ferrocenyldithiophosphonate functional conducting polymer and its use as an immobilization matrix in amperometric biosensor applications. Initially, 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)amidoferrocenyldithiophosphonate was synthesized and copolymerized with 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)benzenamine at graphite electrodes. The amino groups on the polymer were utilized for covalent attachment of the enzyme glucose oxidase. Besides, ferrocene on the backbone was used as a redox mediator during the electrochemical measurements. Prior to the analytical characterization, optimization studies were carried out. The changes in current signals at +0.45 V were proportional to glucose concentration from 0.5 to 5.0 mM. Finally, the resulting biosensor was applied for glucose analysis in real samples and the data were compared with the spectrophotometric Trinder method.

A novel functional conducting polymer as an immobilization platform.

Here, we present the fabrication of conducting polymer based enzymatic and microbial biosensors. To obtain immobilization platforms for both pyranose oxidase (PyOx) and Gluconobacter oxydans, the graphite electrode surface was modified with the polymer of 4-amino-N-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)benzamide (HKCN) which has free amino groups on the surface for further bioconjugation reactions with the biomolecules. Initially, the electrode surface was covered with HKCN via electropolymerization. Then, either PyOx or G. oxydans cell was stabilized using glutaraldehyde as a cross-linker. After optimization of biosensors, analytical characterization and surface imaging studies were investigated. The change of current depends on glucose concentration between 0.05-1.0mM and 0.25-2.5mM with HKCN/PyOx and HKCN/G. oxydans biosensors in batch systems. Also, the calibration graphs were obtained for glucose in FIA mode, and in this case, linear ranges were found to be 0.01-1.0mM and 0.1-7.5mM for HKCN/PyOx and HKCN/G. oxydans, respectively.

Biofunctional quantum dots as fluorescence probe for cell-specific targeting.

We describe here the synthesis, characterization, bioconjugation, and application of water-soluble thioglycolic acid TGA-capped CdTe/CdS quantum dots (TGA-QDs) for targeted cellular imaging. Anti-human epidermal growth factor receptor 2 (HER2) antibodies were conjugated to TGA-QDs to target HER2-overexpressing cancer cells. TGA-QDs and TGA-QDs/anti-HER2 bioconjugates were characterized by fluorescence and UV-Vis spectroscopy, X-ray diffraction (XRD), hydrodynamic sizing, electron microscopy, and gel electrophoresis. TGA-QDs and TGA-QDs/anti-HER2 were incubated with cells to examine cytotoxicity, targeting efficiency, and cellular localization. The cytotoxicity of particles was measured using an MTT assay and the no observable adverse effect concentration (NOAEC), 50% inhibitory concentration (IC50), and total lethal concentration (TLC) were calculated. To evaluate localization and targeting efficiency of TGA-QDs with or without antibodies, fluorescence microscopy and flow cytometry were performed. Our results indicate that antibody-conjugated TGA-QDs are well-suited for targeted cellular imaging studies.

Folic acid-modified clay: targeted surface design for cell culture applications.

Here we report the preparation, characterization and application of folic acid modified Montmorillonite clay (FA-Mont) as a cell culture material. Clays exhibit unique properties such as good mechanical and chemical stabilities, high surface area, low toxicity and easy combination with functional organic groups. FA was used as a modifier to facilitate adhesion of folate positive cells on the clay surface. FA-Mont was characterized using FT-IR, XRD, zeta potential measurements as well as thermogravimetric analyses. Finally, the usage potential of FA-Mont as a receptor mediated cell adhesion material was successfully proved by using folate receptor (FR) rich HeLa and FR poor A-549 cells. The cell adhesion studies were monitored and imaged by fluorescence and scanning electron microscopy techniques.

Modified gold surfaces by 6-(ferrocenyl)hexanethiol/dendrimer/gold nanoparticles as a platform for the mediated biosensing applications.

An electrochemical biosensor mediated by using 6-(Ferrocenyl) hexanethiol (FcSH) was fabricated by construction of gold nanoparticles (AuNPs) on the surface of polyamidoamine dendrimer (PAMAM) modified gold electrode. Glucose oxidase (GOx) was used as a model enzyme and was immobilized onto the gold surface forming a self assembled monolayer via FcSH and cysteamine. Cyclic voltammetry and amperometry were used for the characterization of electrochemical response towards glucose substrate. Following the optimization of medium pH, enzyme loading, AuNP and FcSH amount, the linear range for the glucose was studied and found as 1.0 to 5.0mM with the detection limit (LOD) of 0.6mM according to S/N=3. Finally, the proposed Au/AuNP/(FcSH+Cyst)/PAMAM/GOx biosensor was successfully applied for the glucose analysis in beverages, and the results were compared with those obtained by HPLC.

Chitosan-ferrocene film as a platform for flow injection analysis applications of glucose oxidase and Gluconobacter oxydans biosensors.

Chitosan-ferrocene (CHIT-Fc) hybrid was synthesized through covalent modification and its electrochemical properties in immobilized form were studied by using cyclic voltammetry. The hybrid film exhibited reversible electrochemistry with a formal potential of +0.35 V (vs. Ag/AgCl) at pH 5.5. The Fc in CHIT matrix retained its electrocatalytic activity and did not diffuse from the matrix. This redox-active hybrid was further employed as a support for immobilization of glucose oxidase (GOx) and whole cells of Gluconobacter oxydans using glutaraldehyde on a glassy carbon electrode (GCE). The experimental conditions were optimized and the analytical characteristics of enzyme and microbial biosensors were evaluated for glucose in flow injection analysis (FIA) system. Under optimized conditions, both enzyme and microbial biosensors exhibited wide linear ranges for glucose from 2.0 to 16.0 mM and from 1.5 to 25.0 mM, respectively. Moreover, the biosensors have the advantages of relatively fast response times, good reproducibility and stability in FI mode. It was demonstrated that CHIT-Fc provides a biocompatible microenvironment for both bioctalysts and an electron transfer pathway. Additionally, integration of the enzyme and microbial biosensors into the FIA system has several advantages including capability of automation and high throughput at low cost. This promising redox hybrid can be utilized as an immobilization matrix for biomolecules in biosensor systems.

A conducting polymer with benzothiadiazole unit: cell based biosensing applications and adhesion properties.

Poly(4,7-di(2,3)-dihydrothienol[3,4-b][1,4]dioxin-5-yl-benzo[1,2,5]thiadiazole) (PBDT) was electrochemically deposited on graphite electrodes and used as a matrix for microbial biosensing studies. Moreover, protein adsorption property of the surface was investigated using bovine serum albumin (BSA). For the biosensor preparation, after electrochemical deposition of the polymeric matrix, Gluconobacter oxydans cells were immobilized on the modified electrode. Glucose was used as the substrate and biosensor response was followed successfully at -0.7 V vs Ag/AgCl due to the respiratory activity of the cells which is directly proportional with the substrate concentration. Characterizations were carried out in terms of several parameters such as operational and storage stabilities and surface morphologies. Finally, the effect of antimicrobial agent on the cell based response was tested. As a matrix, conducting polymers enable the preparation of sensitive and stable electrochemical microbial biosensors.

Polysulfone/pyrene membranes: a new microwell assay platform for bioapplications.

The use of PSU-Py prepared by click chemistry as a platform in membrane-bottom microwell plates for oxidase and hydrolase/oxidase-based enzyme assays is studied. For the GOx assay, the postulated fluorescence mechanism is based on the consumption of glucose by dissolved oxygen and GOx in the microwell plates covered with the PSU-Py membrane. For the AG-GOx assay, maltose is used as AG substrate and hydrolyzed to glucose which is then oxidized by the GOx activity. It is shown that the PSU-Py membrane acts as a fluorescence indicator of the enzymatic reactions, and both GOx and AG/GOx enzyme assays are successfully applied for glucose, maltose and acorbose analysis in the range 0.125-2.0 × 10(-3) M glucose, 0.05-0.5 × 10(-3) M maltose, and 0.0125-0.1 mg · mL(-1) acorbose, respectively.

Photochemically prepared polysulfone/poly(ethylene glycol) amphiphilic networks and their biomolecule adsorption properties.

Polysulfone/poly(ethylene glycol) amphiphilic networks were prepared via in situ photo-induced free radical crosslinking polymerization. First, the hydrophobic polysulfone diacrylate (PSU-DA) oligomer was synthesized by condensation polymerization and subsequent esterification processes. Then, the obtained oligomer was co-crosslinked with the hydrophilic poly(ethylene glycol) diacrylate (PEG-DA) or poly(ethylene glycol) methyl ether acrylate (PEG-MA) at different feed ratios. In the case of PEG-MA, the resulting network possessed dangling pendant hydrophilic chains on the crosslinked surface. The structure and the morphology of the membranes were characterized by attenuated total reflection infrared spectroscopy (ATR-IR) and scanning electron microscopy (SEM). The enhancement of surface hydrophilicity was investigated by water contact angle measurements. The biomolecule adsorption properties of these networks were also studied. The biomolecules easily adsorbed on the surface of the hydrophobic polysulfone networks whereas dangling hydrophilic chains on the surface prevented the adsorption of the biomolecules.

A new set up for multi-analyte sensing: at-line bio-process monitoring.

A multi-analyte sensing device is described, for simultaneous at-line monitoring of glucose, ethanol, pO2-value and cell density. It consists of a dual biosensor, a modified microscope and a fiber optical pO2-sensor that are integrated into a flow analysis (FA) system. The biosensor is based on a conventional thin layer flow-through cell equipped with a gold (Au) dual electrode (serial configuration). The biosensors with no cross-talking were produced by modifying the electrochemical transducers. Each Au surface was initially modified by self-assembled monolayer (SAM) of cysteamine. Alcohol oxidase (AOx) and pyranose oxidase (PyOx) were immobilized each onto a gold surface by means of PAMAM (polyamidoamine) dendrimer via glutaraldehyde cross-linking. The responses for glucose and ethanol were linear up to 0.5 mM. The operational stability of the biosensors was very promising, after 11 h continuous operation, only 6.0% of the initial activity was lost. The potential of the described biosensor was demonstrated by parallel determination of ethanol and glucose in yeast fermentation process. Simultaneously the cell density of the culture was monitored with an in situ microscope (ISM), which was integrated into the FA system. Both the used in situ microscope and the image processing algorithm used for the analysis of the acquired image data are described. Furthermore the pO2-value was monitored using a fiber optical sensor, which was embedded in a flow cell. The multi-sensor device allows the at-line monitoring of several process values without the need for further sampling or time consuming offline measurements.

Offline glucose biomonitoring in yeast culture by polyamidoamine/cysteamine-modified gold electrodes.

This article deals with the use of pyranose oxidase (PyOx) and glucose oxidase (GOx) enzymes in amperometric biosensor design and their application in monitoring fermentation processes with the combination of flow injection analysis (FIA). The amperometric studies were carried out at -0.7 V by following the oxygen consumption due to the enzymatic reactions for both batch and FIA modes. Optimization studies (enzyme amounts and pH) and analytical parameters such as linearity, repeatability, effect of interference, storage, and operational stabilities have been studied. Under optimized conditions, for the PyOx-based biosensor, linear graph was obtained from 0.025 to 0.5 mM glucose in phosphate buffer (50 mM) at pH 7.0 with the equation of y = 3.358x + 0.028 and R(2) = 0.998. Linearity was found to be 0.01-1.0 mM in citrate buffer (50 mM and pH 4.0) with the equation of y = 1.539x + 0.181 and R(2) = 0.992 for the GOx biosensor. Finally, these biosensor configurations were further evaluated in a conventional flow injection system. Results from batch experiments provide a guide to design sensitive, stable, and interference-free biosensors for FIA mode. Biosensor stability, dynamic range, and repeatability were also studied in FIA conditions, and the applicability for the determination of glucose in fermentation medium could be successfully demonstrated. The FIA-combined glucose biosensor was used for the offline monitoring of yeast fermentation. The obtained results correlated well with HPLC measurements.