Observation of magnetic vortex configuration in non-stoichiometric Fe3O4 nanospheres.

Theoretical and micromagnetic simulation studies of magnetic nanospheres with vortex configurations suggest that such nanostructured materials have technological advantages over conventional nanosystems for applications based on high-power-rate absorption and subsequent emission. However, full experimental evidence of magnetic vortex configurations in spheres of submicrometer size is still lacking. Here, we report the microwave irradiation fabrication of Fe3O4 nanospheres and establish their magnetic vortex configuration based on experimental results, theoretical analysis, and micromagnetic simulations. Detailed magnetic and electrical measurements, together with Mössbauer spectroscopy data, provide evidence of a loss of stoichiometry in vortex nanospheres owing to the presence of a surface oxide layer, defects, and a higher concentration of cation vacancies. The results indicate that the magnetic vortex spin configuration can be established in bulk spherical magnetite materials. This study provides crucial information that can aid the synthesis of magnetic nanospheres with magnetically tailored properties; consequently, they may be promising candidates for future technological applications based on three-dimensional magnetic vortex structures.

Zeolite Nanoparticles Loaded with 2-Methoxystradiol as a Novel Drug Delivery System for the Prostate Cancer Therapy.

The estrogen metabolite 2-methoxyestradiol (2ME) is a promissory anticancer drug mainly because of its pro-apoptotic properties in cancer cells. However, the therapeutic use of 2ME has been hampered due to its low solubility and bioavailability. Thus, it is necessary to find new ways of administration for 2ME. Zeolites are inorganic aluminosilicates with a porous structure and are considered good adsorbents and sieves in the pharmaceutical field. Here, mordenite-type zeolite nanoparticles were loaded with 2ME to assess its efficiency as a delivery system for prostate cancer treatment. The 2ME-loaded zeolite nanoparticles showed an irregular morphology with a mean hydrodynamic diameter of 250.9 ± 11.4 nm, polydispersity index of 0.36 ± 0.04, and a net negative surface charge of -34 ± 1.73 meV. Spectroscopy with UV-vis and Attenuated Total Reflectance Infrared Fourier-Transform was used to elucidate the interaction between the 2ME molecules and the zeolite framework showing the formation of a 2ME-zeolite conjugate in the nanocomposite. The studies of adsorption and liberation determined that zeolite nanoparticles incorporated 40% of 2ME while the liberation of 2ME reached 90% at pH 7.4 after 7 days. The 2ME-loaded zeolite nanoparticles also decreased the viability and increased the mRNA of the 2ME-target gene F-spondin, encoded by SPON1, in the human prostate cancer cell line LNCaP. Finally, the 2ME-loaded nanoparticles also decreased the viability of primary cultures from mouse prostate cancer. These results show the development of 2ME-loaded zeolite nanoparticles with physicochemical and biological properties compatible with anticancer activity on the human prostate and highlight that zeolite nanoparticles can be a good carrier system for 2ME.

Enhanced removal of mercury and lead by a novel and efficient surface-functionalized imogolite with nanoscale zero-valent iron material.

A novel hybrid nanomaterial, nanoscale zero-valent iron (nZVI)-grafted imogolite nanotubes (Imo), was synthesized via a fast and straightforward chemical procedure. The as-obtained nanomaterial (Imo-nZVI) was characterized using transmission electron microscopy (TEM), electrophoretic mobility (EM), and vibrating sample magnetometry (VSM). The prepared Imo-nZVI was superparamagnetic at room temperature and could be easily separated by an external magnetic field. Sorption batch experiments were performed for single- and multicomponent systems and demonstrated that Hg2+ and Pb2+ could be quantitatively adsorbed at pH 3.0. For multicomponent systems, maximum adsorption capacities of 61.6 mg·g-1 and 76.9 mg·g-1 were obtained for Hg2+ and Pb2+ respectively. It was observed that the functional groups in Imo-nZVI interact preferentially with analytes according to the Misono softness parameter. The higher performance of Imo-nZVI compared with Imo and nZVI is related to the increased number of adsorption sites in the functionalized nanomaterial. The sorption equilibrium data obeyed the Langmuir model, while kinetic studies demonstrated that the sorption processes of Hg2+ and Pb2+ followed the pseudo-second-order model. This study suggests that the Imo-nZVI composite can be used as a promising sorbent to provide a simple and fast separation method to remove Hg and Pb ions from contaminated water.

Magnetic Field-Assisted Photocatalytic Degradation of Organic Pollutants over Bi1-xRxFeO3 (R = Ce, Tb; x = 0.00, 0.05, 0.10 and 0.15) Nanostructures.

Magnetic-field-accelerated photocatalytic degradation of the phenol red (PR) as a model organic pollutant was studied using rare-earth elements modified BiFeO3 (Bi1-xRxFeO3 (R = Ce, Tb; x = 0.0, 0.05, 0.10 and 0.15); BFO: RE) nanostructures. The nanostructures were prepared via the hydrothermal process and their morphological, structural, functional, optical and magnetic features were investigated in detail. The effect of magnetic fields (MFs) on photocatalysis were examined by applying the different MFs under visible light irradiation. The enhanced photodegradation efficiencies were achieved by increasing the MF up to 0.5T and reduced at 0.7T for the compositions x = 0.10 in both Ce and Tb substituted BFO. Further, mineralization efficiencies of PR, reproducibility of MF-assisted photocatalysis, stability and recyclability of BFO: RE nanostructures were also tested.

Starch-based magnetic nanocomposite for targeted delivery of hydrophilic bioactives as anticancer strategy.

Magnetic nanocomposites were synthesized for the targeted delivery of hydrophilic bioactives through guidance generated by a magnetic field. Superparamagnetic iron oxide nanoparticles (SPIONs) were used to generate hydroxyethyl starch magnetic nanocapsules (HES MNCs). This synthesis allowed the co-encapsulation of oncocalyxone A (onco A) and surface-modified magnetite nanoparticles (Fe3O4@citrate) into the same nanostructure. The synthesized nanocapsules exhibited a core-shell morphology, with an average diameter of 143 nm. This nanocomposite showed potential anticancer activity (IC50) against four human tumor cell lines: glioblastoma SNB-19 (1.010 µgmL-1), colon carcinoma HCT-116 (2.675 µgmL-1), prostate PC3 (4.868 µgmL-1), and leukemia HL-60 (2.166 µgmL-1). Additionally, in vivo toxicity and locomotor activity were evaluated in a zebrafish (Danio rerio) model. The nanocomposite exhibited in vitro cytotoxicity, prolonged drug release profile and also responded to an applied magnetic field, representing a versatile compound with perspectives for highest concentration of different hydrophilic bioactives in a target tissue through magnetic vectorization.

Realization of structural transformation for the enhancement of magnetic and magneto capacitance effect in BiFeO3-CoFe2O4 ceramics for energy storage application.

In this study, (1 - x) BFO-xCFO (CFO, x = 0.00, 0.05, 0.10 and 0.30) ceramics were synthesized by a solid-state reaction method; their compositions were driven by structural, microstructural, vibrational, electrical, magnetic properties; their enhanced magneto capacitance (MC) effect have also been carried out. Reitveld refinement studies of X-ray diffraction data shows composition-driven structural phase transformation from rhombohedral (R3c) to tetragonal (P4mm). Two phonon scattering Raman modes were observed for the higher wavenumber which supports the crystal structural transition in the BFO-CFO. Ferroelectric polarization shows that the polarization increased with increasing CFO concentration, which describes the changes of the polar symmetry of the crystal structure from rhombohedral (R3c) to tetragonal (P4mm). In Further, the maximum efficiency of energy density (η = 68.65%), reversible energy density of 0.138 J/cm3 and the strong magneto capacitance was observed in 0.9BFO-0.1CFO, which belongs to the morphotropic phase boundary (MPB) region near to the BiFeO3-rich region. The magnetic response analysis has shown, the saturation magnetization (Ms) values of 83 emu/gm and 139 emu/gm for pure CFO and 0.7BFO-0.3CFO composite, respectively, and their magnetic behaviours were also confirmed with Arrott-Belov-Kouvel (ABK) plot.

Stabilization of Magnetic Skyrmions on Arrays of Self-Assembled Hexagonal Nanodomes for Magnetic Recording Applications.

Magnetic skyrmions are nontrivial spin textures that resist external perturbations, being promising candidates for the next-generation recording devices. Nevertheless, a major challenge in realizing skyrmion-based devices is the stabilization of ordered arrays of these spin textures under ambient conditions and zero applied field. Here, we demonstrate for the first time the formation and stabilization of magnetic skyrmions on the arrays of self-assembled hexagonal nanodomes taking advantage of the intrinsic properties of its curved geometry. Magnetic force microscopy images from the arrays of 100 nm nanodomes showed stable skyrmions at the zero field that are arranged following the topography of the nanostructure. Micromagnetic simulations are compared to the experiments to determine the correlation of the domain textures with the topography of the samples. We propose a simple method to nucleate and annihilate skyrmions, opening the possibility for an ultradense data storage based on the high stability and low energy consumption of the skyrmionic textures.

Nickel Nanopillar Arrays Electrodeposited on Silicon Substrates Using Porous Alumina Templates.

Nickel nanopillar arrays were electrodeposited onto silicon substrates using porous alumina membranes as a template. The characterization of the samples was done by scanning electron microscopy, X-ray diffraction, and alternating force gradient magnetometry. Ni nanostructures were directly grown on Si by galvanostatic and potentiostatic electrodeposition techniques in three remarkable charge transfer configurations. Differences in the growth mechanisms of the nanopillars were observed, depending on the deposition method. A high correlation between the height of the nanopillars and the charge synthesis was observed irrespective of the electrochemical technique. The magnetization measurements demonstrated a main dependence with the height of the nanopillars. The synthesis of Ni nanosystems with a controllable aspect ratio provides an effective way to produce well-ordered networks for wide scientific applications.

Antibacterial activity of fluoxetine-loaded starch nanocapsules.

This work proposes the development of a starch-based drug carrier for fluoxetine (FLX) delivery and evaluate the improvement of the drug antibacterial activity. The starch nanocapsules were prepared via interfacial polyaddition reaction presenting a core-shell morphology, based on polyurethane linkage, with a particle size in the range 250-300 nm. Furthermore, FLX-loaded nanocapsules were evaluated regarding antibacterial potential against Staphylococcus aureus (ATCC® 6538P ™) and its clinical strains of methicillin-resistant. As expected, the FLX-loaded presented lower minimum inhibitory concentration (MIC) values, in the range of 190-95 µg mL-1, against all isolated microorganisms in comparison to FLX, 255 µg mL-1. According to results, the FLX-loaded starch nanocapsules have successfully improved drug antibacterial activity, generating promising perspectives on the field of the hydrophilic drug delivery systems.

Lipase From Rhizomucor miehei Immobilized on Magnetic Nanoparticles: Performance in Fatty Acid Ethyl Ester (FAEE) Optimized Production by the Taguchi Method.

In this communication, it was evaluated the production of fatty acid ethyl ester (FAAE) from the free fatty acids of babassu oil catalyzed by lipase from Rhizomucor miehei (RML) immobilized on magnetic nanoparticles (MNP) coated with 3-aminopropyltriethoxysilane (APTES), Fe3O4@APTES-RML or RML-MNP for short. MNPs were prepared by co-precipitation coated with 3-aminopropyltriethoxysilane and used as a support to immobilize RML (immobilization yield: 94.7 ± 1.0%; biocatalyst activity: 341.3 ± 1.2 U p -NPB/g), which were also activated with glutaraldehyde and then used to immobilize RML (immobilization yield: 91.9 ± 0.2%; biocatalyst activity: 199.6 ± 3.5 U p -NPB/g). RML-MNP was characterized by X-Ray Powder Diffraction (XRPD), Fourier Transform-Infrared (FTIR) spectroscopy and Scanning Electron Microscope (SEM), proving the incorporation and immobilization of RML on the APTES matrix. In addition, the immobilized biocatalyst presented at 60°C a half-life 16-19 times greater than that of the soluble lipase in the pH range 5-10. RML and RML-MNP showed higher activity at pH 7; the immobilized enzyme was more active than the free enzyme in the pH range (5-10) analyzed. For the production of fatty acid ethyl ester, under optimal conditions [40°C, 6 h, 1:1 (FFAs/alcohol)] determined by the Taguchi method, it was possible to obtain conversion of 81.7 ± 0.7% using 5% of RML-MNP.

Magnetic Porous Controlled Fe3O4-Chitosan Nanostructure: An Ecofriendly Adsorbent for Efficient Removal of Azo Dyes.

In this work, chitosan/magnetite nanoparticles (ChM) were quickly synthesized according to our previous report based on co-precipitation reaction under ultrasound (US) irradiation. Besides ChM was in-depth structurally characterized, showing a crystalline phase corresponding to magnetite and presenting a spheric morphology, a "nanorod"-type morphology was also obtained after increasing reaction time for eight minutes. Successfully, both morphologies presented a nanoscale range with an average particle size of approximately 5-30 nm, providing a superparamagnetic behavior with saturation magnetization ranging from 44 to 57 emu·g-1. As ChM nanocomposites have shown great versatility considering their properties, we proposed a comparative study using three different amine-based nanoparticles, non-surface-modified and surface-modified, for removal of azo dyes from aqueous solutions. From nitrogen adsorption-desorption isotherm results, the surface-modified ChMs increased the specific surface area and pore size. Additionally, the adsorption of anionic azo dyes (reactive black 5 (RB5) and methyl orange (MO)) on nanocomposites surface was pH-dependent, where surface-modified samples presented a better response under pH 4 and non-modified one under pH 8. Indeed, adsorption capacity results also showed different adsorption mechanisms, molecular size effect and electrostatic attraction, for unmodified and modified ChMs, respectively. Herein, considering all results and nanocomposite-type structure, ChM nanoparticles seem to be a suitable potential alternative for conventional anionic dyes adsorbents, as well as both primary materials source, chitosan and magnetite, are costless and easily supplied.

Nanomaterials Based on Fe3O4 and Phthalocyanines Derived from Cashew Nut Shell Liquid.

In this work we report the synthesis of new hybrid nanomaterials in the core/shell/shell morphology, consisting of a magnetite core (Fe3O4) and two consecutive layers of oleic acid (OA) and phthalocyanine molecules, the latter derived from cashew nut shell liquid (CNSL). The synthesis of Fe3O4 nanoparticle was performed via co-precipitation procedure, followed by the nanoparticle coating with OA by hydrothermal method. The phthalocyanines anchorage on the Fe3O4/OA core/shell nanomaterial was performed by facile and effective sonication method. The as obtained Fe3O4/OA/phthalocyanine hybrids were investigated by Fourier transform infrared spectroscopy, X-ray diffraction, UV-visible spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis and magnetic measurements. TEM showed round-shaped nanomaterials with sizes in the range of 12-15 nm. Nanomaterials presented saturation magnetization (Ms) in the 1-16 emu/g and superparamagnetic behavior. Furthermore, it was observed that the thermal stability of the samples was directly affected by the insertion of different transition metals in the ring cavity of the phthalocyanine molecule.

Chitosan-magnetite nanocomposite as a sensing platform to bendiocarb determination.

A novel platform for carbamate-based pesticide quantification using a chitosan/magnetic iron oxide (Chit-Fe3O4) nanocomposite as a glassy carbon electrode (GCE) modifier is shown for an analytical methodology for determination of bendiocarb (BND). The BND oxidation signal using GCE/Chit-Fe3O4 compared with bare GCE was catalyzed, showing a 37.5% of current increase with the peak potential towards less positive values, showing method's increased sensitivity and selectivity. Using square-wave voltammetry (SWV), calibration curves for BND determination were obtained (n = 3), and calculated detection and quantification limits values were 2.09 × 10-6 mol L-1 (466.99 ppb) and 6.97 × 10-6 mol L-1 (1555.91 ppb), respectively. The proposed electroanalytical methodology was successfully applied for BND quantification in natural raw waters without any sample pretreatment, proving that the GCE/Chit-Fe3O4 modified electrode showed great potential for BND determination in complex samples. ᅟ Graphical abstract.

Magnetic nanoparticles as a support for a copper (II) complex with nuclease activity.

Magnetic nanoparticles have been extensively explored for the development of platforms for drug delivery and imaging probes. In this work, we have used a modular capping strategy to produce magnetic gold-coated Fe3O4 (Fe3O4@Au) nanoparticles, which have been decorated with a copper (II) complex containing a thioether derivative of clip-phen (Fe3O4@Au@Cu), where the complex [Cu(2CP-Bz-SMe)]2+ has affinity to bind DNA and proven nuclease activity (2CP-Bz-SMe=1,3-bis((1,10-phenanthrolin-2-yl)oxy)-N-(4-(methylthio)benzylidene)propan-2-imine). The functionalization of Fe3O4@Au with the copper complex occurs through the sulfur atom of the thioether moiety, as indicated by Raman scattering on surface. The magnetic measurements showed the nanomaterial Fe3O4@Au@Cu is still magnetic although the gold shell and the functionalization with the copper complex have diminished the magnetization due to the dilution of the magnetic core. The nuclease assays performed with Fe3O4@Au@Cu indicate that the nuclease activity of the nanomaterial toward the plasmid DNA involves an oxidative pathway in which H2O2 species is involved as intermediate in a Fenton-like reaction. Based on the electron paramagnetic resonance spectra (aN = 15.07 G, aH = 14.99 G), such nuclease activity is assigned, essentially, to the HO species indicating that the radical production property of [Cu(2CP-Bz-SMe)]2+ is successfully transferred to the core-shell gold-coated Fe3O4 magnetic nanoparticles. To the best of our knowledge, this is the first study reporting nuclease activity due to the reactive oxygen species generated by a copper complex immobilized on a gold-coated magnetic nanoparticle.

Temperature-dependent magnetic properties of Ni nanotubes synthesized by atomic layer deposition.

Highly-ordered and conformal Ni nanotube arrays were prepared by combining atomic layer deposition (ALD) in a porous alumina matrix with a subsequent thermal reduction process. In order to obtain NiO tubes, one ALD NiCp2/O3 cycle was repeated 2000 times. After the ALD process, the sample is reduced from NiO to metallic Ni under hydrogen atmosphere. Their magnetic properties such as coercivity and squareness have been determined in a vibrating sample magnetometer in the temperature range from 5-300 K for applied magnetic fields parallel and perpendicular to the nanotube axis. Ni nanotubes synthesized by ALD provide a promising opportunity for potential applications in spintronics, data storage and bio-applications.

Magnetic nanosystem for cancer therapy using oncocalyxone a, an antitomour secondary metabolite isolated from a Brazilian plant.

This paper describes the investigation and development of a novel magnetic drug delivery nanosystem (labeled as MO-20) for cancer therapy. The drug employed was oncocalyxone A (onco A), which was isolated from Auxemma oncocalyx, an endemic Brazilian plant. It has a series of pharmacological properties: antioxidant, cytotoxic, analgesic, anti-inflammatory, antitumor and antiplatelet. Onco A was associated with magnetite nanoparticles in order to obtain magnetic properties. The components of MO-20 were characterized by XRD, FTIR, TGA, TEM and Magnetization curves. The MO-20 presented a size of about 30 nm and globular morphology. In addition, drug releasing experiments were performed, where it was observed the presence of the anomalous transport. The results found in this work showed the potential of onco A for future applications of the MO-20 as a new magnetic drug release nanosystem for cancer treatment.

Superparamagnetic Poly (3-hydroxybutyrate-co-3 hydroxyvalerate) (PHBV) nanoparticles for biomedical applications

Background: The progress in material science and the recent advances in biodegradable/biocompatible polymers and magnetic iron oxide nanoparticles have led to develop innovative diagnostic and therapeutic strategies for diseases based on multifunctional nanoparticles, which include contrast medium for magnetic resonance imaging, agent for hyperthermia and nanocarriers for targeted drug delivery. The aim of this work is to synthesize and characterize superparamagnetic iron oxide (magnetite), and to encapsulate them into poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanoparticles for biomedical applications. Results: The magnetite nanoparticles were confirmed by X-ray diffraction and exhibited a size of 22.3 ± 8.8 nm measured by transmission electron microscopy (TEM). Polymeric PHBV nanoparticles loaded with magnetite (MgNPs) were analyzed using dynamic light scattering and showed a size of 258.6 ± 35.7 nm and a negative zeta potential (-10.8 ± 3.5 mV). The TEM examination of MgNPs exhibited a spherical core-shell structure and the magnetic measurements showed in both, non-encapsulated magnetite and MgNPs, a superparamagnetic performance. Finally, the in vitro studies about the magnetic retention of MgNPs in a segment of small intestine of rats showed an active accumulation in the region of the magnetic field. Conclusions: The results obtained make the MgNPs suitable as potential magnetic resonance imaging contrast agents, also promoting hyperthermia and even as potential nanocarriers for site-specific transport and delivery of drugs.

Template assisted electrochemical growth of cobalt nanowires: influence of deposition conditions on structural, optical and magnetic properties.

The influence of electrodeposition potential, pH, composition and temperature of the electrolytic bath on the structure of cobalt nanowires arrays electrodeposited into anodic aluminum oxide (AAO) porous membranes is reported. XRD, SEM, and TEM analysis were employed to characterize structural (crystal phase, crystallographic texture, and grain size), and morphological nanowire properties. It was confirmed that at pH 2 the electrodeposition potential has not influence on the preferred crystallographic orientation of the electrochemically grown Co nanowires. At pH 4 the electrodeposition potential controls the growth of cobalt nanowires along some preferential crystallographic planes. The electrolytic pH bath modulates the fcc or hcp phase exhibited by the cobalt nanowires. Single crystalline nanowires with a hcp phase strongly oriented along the (2021) crystallographic plane were obtained at pH 4 and at -1.1 V (vs. Ag/AgCl), a result not previously reported. High electrolytic bath temperatures contributed to improve the single crystalline character of the cobalt nanowires. The presence of chloride anion in the electrolytic bath also influenced on the structural properties of the resulting cobalt nanowires, improving their crystallinity. The optical reflectance of the samples shows a structure in the UV-blue region that can be assigned to the two-dimensional morphology arising in the shape of the almost parallel nanowires. Magnetic measurements showed that different electrodeposition potentials and electrolytic bath pH lead to different magnetic anisotropies on the nanowire array samples.

Single-crystal growth of nickel nanowires: influence of deposition conditions on structural and magnetic properties.

This paper examines the influence of electrodeposition potential, pore size, pH, composition, and temperature of the electrolytic bath on the structure of nickel nanowires arrays electrodeposited into anodic alumina oxide porous membranes. Scanning electron microscopy, X-ray diffraction, and transmission electron microscopy analysis were employed to characterize the structural and morphological properties of the nanowires. Results show that the electrodeposition potential controls the growth of nickel nanowires along some preferential crystallographic planes. At -0.90 V (vs. Ag/AgCl) single crystalline nanowires with a strong (111) orientation were obtained. High temperatures and a moderately acid pH solution contributed to improve the single crystalline character of nanowires. The presence of chloride ions produced polycrystalline nanowires at low temperature and single crystalline nanowires at high temperature. The influence of the electrodeposition potential in their magnetic anisotropies is also reported.