Enhancement of struvite generation and anti-fouling in an electro-AnMBR with Mg anode-MF membrane module.

Severe membrane fouling and the inability to remove/recover nitrogen and phosphorus are bottlenecks of anaerobic membrane bioreactors (AnMBRs) for large-scale application in wastewater treatment. Herein, an electrochemical AnMBR with a Mg anode-membrane module (electro-AnMBR) was built and showed good performance in terms of membrane fouling mitigation and nutrient recovery during sewage treatment. Compared with the traditional AnMBR, membrane fouling in the electro-AnMBR was reduced by up to 30%. The application of an electric field decreased the zeta potential, viscosity, and EPS concentration of the sludge-water liquor in the electro-AnMBR, which could improve the cake layer structure and thus enhance water permeability. Meanwhile, 26% of NH4+ and 48% of PO43- co-precipitated with Mg2+ generating from the sacrificial Mg anode and were recovered as struvite deposited onto cathode in the electro-AnMBR. Hydrogen evolution provided a relatively alkaline pH environment, resulting in struvite electrodeposition on the graphic cathode, which partly separated the formed struvite from the sludge with a purity of 77%. In the electro-AnMBR, the electrochemical reactions provided alkalinity and effectively inhibited anaerobic acidification. The applied voltage of 0.6 V reduced the relative abundance of methanosaeta, but increased that of methanosarcina, which is also beneficial for the membrane anti-fouling.

Membrane fouling mitigation by coagulation and electrostatic repulsion using an electro-AnMBR in kitchen wastewater treatment.

Anaerobic membrane bioreactor (AnMBR) is considered an efficient technique for kitchen wastewater treatment; however, membrane fouling restricts their applicability. In this study, a novel AnMBR with an Fe anode and Ti membrane cathode (electro-AnMBR) was constructed. The reactor exhibited good performance in pollutant removal and antifouling in kitchen wastewater treatment. Compared with the traditional AnMBR, the electro-AnMBR increased phosphate removal by approximately 55% and reduced transmembrane pressure (TMP) by 50%. Coagulation from the Fe2+/Fe3+ released by the sacrificial anode increased the sludge floc size and porosity, significantly reducing the membrane fouling potential. In addition, the lower amounts of extracellular polymeric substances (EPS) in the electro-AnMBR, due to an increased Methanosarcina abundance, facilitated membrane-fouling mitigation. Almost no TMP difference was observed between the AnMBRs with Ti, ceramic, and polyvinylidene fluoride (PVDF) membranes. Quantitative analysis using an electrochemical quartz crystal microbalance with dissipation monitoring indicated that the electrostatic repulsion between EPS and cathodic membrane was positively correlated with the applied voltage. In addition, proteins in EPS had a higher membrane fouling potential than polysaccharides, and Fe3+ coagulation reduced adhesion capacity and alleviated membrane fouling. This study provides a perspective viewpoint for AnMBR membrane fouling mitigation and reactor design.