Skin-Interfaced Bifluidic Paper-Based Device for Quantitative Sweat Analysis.

The erratic, intermittent, and unpredictable nature of sweat production, resulting from physiological or psychological fluctuations, poses intricacies to consistently and accurately sample and evaluate sweat biomarkers. Skin-interfaced microfluidic devices that rely on colorimetric mechanisms for semi-quantitative detection are particularly susceptible to these inaccuracies due to variations in sweat secretion rate or instantaneous volume. This work introduces a skin-interfaced colorimetric bifluidic sweat device with two synchronous channels to quantify sweat rate and biomarkers in real-time, even during uncertain sweat activities. In the proposed bifluidic-distance metric approach, with one channel to measure sweat rate and quantify collected sweat volume, the other channel can provide an accurate analysis of the biomarkers based on the collected sweat volume. The closed channel design also reduces evaporation and resists contamination from the external environment. The feasibility of the device is highlighted in a proof-of-the-concept demonstration to analyze sweat chloride for evaluating hydration status and sweat glucose for assessing glucose levels. The low-cost yet highly accurate device provides opportunities for clinical sweat analysis and disease screening in remote and low-resource settings. The developed device platform can be facilely adapted for the other biomarkers when corresponding colorimetric reagents are exploited.

Fluorometric determination of the breast cancer 1 gene based on the target-induced conformational change of a DNA template for copper nanoclusters.

The breast cancer 1 (BRCA1) gene is a tumor suppressor gene, whose mutation is closely related to breast cancer. Therefore, the sensitive detection of the BRCA1 gene is extremely important for human health, particularly for women. In this study, a label-free fluorescent method based on hairpin DNA-templated copper nanoclusters (CuNCs) was for the first time developed for the detection of the BRCA1 gene. In the absence of target DNA, the detection system showed a strong red emission and produced a high emission peak. However, in the presence of the BRCA1 gene, the DNA probe hybridized with the BRCA1 gene and conformation of the DNA probe changed. As a result, the amount of produced CuNCs decreased and a low emission peak was obtained. The fluorescence intensity of the detection system was linearly correlated with the concentration of the BRCA1 gene ranging from 2 nM to 600 nM. The detectable limit was 2 nM for the BRCA1 gene assay, which was comparable with those reported by other non-amplifying sensors. Moreover, the developed method showed satisfactory recoveries for the BRCA1 gene assay in the bovine serum. The DNA-templated CuNC-based fluorescent assay thus offered a promising platform for the diagnosis of a breast cancer biomarker.

3D Microfluidic Devices in a Single Piece of Paper for the Simultaneous Determination of Nitrite and Thiocyanate.

The concentrations of nitrite and thiocyanate in saliva can be used as the biomarkers of the progression of periodontitis disease and environmental tobacco smoke exposure, respectively. Therefore, it is particularly necessary to detect these two indicators in saliva. Herein, the three-dimensional single-layered paper-based microfluidic analytical devices (3D sl-µPADs) were, for the first time, fabricated by the spraying technique for the colorimetric detection of nitrite and thiocyanate at the same time. The conditions for 3D sl-µPADs fabrication were optimized in order to well control the penetration depth of the lacquer in a paper substrate. Then, the developed 3D sl-µPADs were utilized to simultaneously detect nitrite and thiocyanate and the limits of detection are 0.0096 and 0.074 mM, respectively. What is more, the µPADs exhibited good specificity, good repeatability, and acceptable recoveries in artificial saliva. Therefore, the developed 3D sl-µPADs show a great potential to determine nitrite and thiocyanate for the assessment of the human health.

New Single-Layered Paper-Based Microfluidic Devices for the Analysis of Nitrite and Glucose Built via Deposition of Adhesive Tape.

A simple, low-cost technique has been developed for the rapid fabrication of single-layered paper-based microfluidic devices (µPADs). This technique, for the first time, made use of the deposition of patterned adhesive tape into the filter paper to construct hydrophobic barriers, with the help of toluene. Unlike other reported multi-layered µPADs that merely made use of adhesive tape as a separate layer for sealing or fluid flow controlling, the patterned adhesive tape was simultaneously dissolved and penetrated into the filter paper, which resulted in the successful transfer of the pattern from the tape to the filter paper. To demonstrate the effectiveness of this approach, nitrite and glucose were individually measured; detection limits as low as 0.015 ± 0.004 mM and 0.022 ± 0.006 mM were reported for nitrite and glucose, respectively. Multiplexed analysis of both analytes was also carried out with respective detection limits of 0.048 ± 0.005 mM and 0.025 ± 0.006 mM for nitrite and glucose. The application of the method was demonstrated by measuring nitrite and glucose in spiked artificial urine samples and satisfied recovery results were obtained.