Biodegradable starch foams reinforced by food-chain side streams.

Biodegradable starch foam trays offer an eco-friendly substitute for petroleum-based single-use packaging, notably polystyrene foams. However, they lack flexibility, tensile strength, and water-sensitivity, addressable through lignocellulosic reinforcement. This study aimed to develop biodegradable starch foam trays filled with different food-chain side streams for sustainable alternative packaging. Corncob, soybean straw, cassava peel, araucaria seed hull, yerba mate stalks and yerba mate leaves petiole were collected, dried and ground to <250 µm. The trays were filled with 13 % (w/w) of each food-chain side streams and produced by hot molding. The trays morphology, moisture, water activity (aw), thickness, bulk density, tensile strength, elongation at break, Young's modulus, bending strength, maximum deflection, and sorption isotherms were investigated. Reinforcements slightly increased the foams bulk density, reduced the tensile strength and maximum deflection and while bending strength increased from 0.20 MPa to 1.17-1.80 MPa. The elasticity modulus decreased by adding any filling, that resulted in ductility improvement; however, these packaging have moisture-sensitive material especially for aw higher than 0.52, which drives the use recommendation for dry products storage or shipping/transport. The biodegradable starch foam trays filled with side streams were successfully produced and offer excellent alternative to petroleum-based packaging low-density material with bending strength improved.

Films based on oxidized starch and cellulose from barley.

Starch and cellulose fibers were isolated from grains and the husk from barley, respectively. Biodegradable films of native starch or oxidized starches and glycerol with different concentrations of cellulose fibers (0%, 10% and 20%) were prepared. The films were characterized by morphological, mechanical, barrier, and thermal properties. Cellulose fibers isolated from the barley husk were obtained with 75% purity and high crystallinity. The morphology of the films of the oxidized starches, regardless of the fiber addition, was more homogeneous as compared to the film of the native starch. The addition of cellulose fibers in the films increased the tensile strength and decreased elongation. The water vapor permeability of the film of oxidized starch with 20% of cellulose fibers was lower than the without fibers. However the films with cellulose fibers had the highest decomposition with the initial temperature and thermal stability. The oxidized starch and cellulose fibers from barley have a good potential for use in packaging. The addition of cellulose fibers in starch films can contribute to the development of films more resistant that can be applied in food systems to maintain its integrity.

Effects of single and dual physical modifications on pinhão starch.

Pinhão starch was modified by annealing (ANN), heat-moisture (HMT) or sonication (SNT) treatments. The starch was also modified by a combination of these treatments (ANN-HMT, ANN-SNT, HMT-ANN, HMT-SNT, SNT-ANN, SNT-HMT). Whole starch and debranched starch fractions were analyzed by gel-permeation chromatography. Moreover, crystallinity, morphology, swelling power, solubility, pasting and gelatinization characteristics were evaluated. Native and single ANN and SNT-treated starches exhibited a CA-type crystalline structure while other modified starches showed an A-type structure. The relative crystallinity increased in ANN-treated starches and decreased in single HMT- and SNT-treated starches. The ANN, HMT and SNT did not provide visible cracks, notches or grooves to pinhão starch granule. SNT applied as second treatment was able to increase the peak viscosity of single ANN- and HMT-treated starches. HMT used alone or in dual modifications promoted the strongest effect on gelatinization temperatures and enthalpy.