Morphological Analysis of Healthy Aortic Arch.

OBJECTIVE/BACKGROUND: This study aimed to describe an arch morphology protocol in a healthy population, and to assess the impact of age and sex. METHODS: A retrospective morphology evaluation was conducted in a population with no personal history of thoracic aorta surgery or pathology, through computed tomography (CT) imaging analysis, using a standardised protocol. Based on centreline three dimensional coordinates, a single investigator calculated a series of parameters in the arch zones and in the total arch, using Matlab scripts. These were categorized as: (i) morphometric data: diameter, length and aortic angle of each zone, total arch angle, and length; (ii) geometric data: tortuosity index (TI), arch width, assimilated curvature radius (CRi), and attachment zone angles. Student or Mann-Whitney tests were used to compare parameter means. Their variability with age and sex was assessed through univariate and multivariate regression analysis. RESULTS: CT images from 123 subjects (mean ± SD age 53 ± 19 years) were reviewed. Significant correlation between age and morphology was found. The aorta expanded homogeneously and stretched heterogeneously with age because of posterior arch elongation. TI decrease, CRi, and attachment zone angle increase were also observed with aging. Age remained significantly associated with these morphological parameters, independently of body surface area and hypertension. Sex also affected morphology: longer total arch length and higher CRarch in men; lower zone 3 attachment angle in women CONCLUSION: Using mathematical algorithms, and with a view to improving endovascular arch treatment, this study provides a standardised arch morphology protocol and objectively identifies both age related evolution and sex related variation in the different zones.

Risk Factor Analysis for the Mal-Positioning of Thoracic Aortic Stent Grafts.

OBJECTIVE: The present study aimed at quantifying mal-positioning during thoracic endovascular aortic repair and analysing the extent to which anatomical factors influence the exact stent graft positioning. METHODS: A retrospective review was conducted of patients treated between 2007 and 2014 with a stent graft for whom proximal landing zones (LZ) could be precisely located by anatomical fixed landmarks, that is LZ 1, 2, or 3. The study included 66 patients (54 men; mean age 51 years, range 17-83 years) treated for traumatic aortic rupture (n = 27), type B aortic dissection (n = 21), thoracic aortic aneurysm (n = 8), penetrating aortic ulcer (n = 5), intramural hematoma (n = 1), and floating aortic thrombus (n = 4). Pharmacologic hemodynamic control was systematically obtained during stent graft deployment. Pre- and post-operative computed tomographic angiography was reviewed to quantify the distance between planned and achieved LZ and to analyze different anatomical factors: iliac diameter, calcification degree, aortic angulation at the proximal deployment zone, and tortuosity index (TI). RESULTS: Primary endoleak was noted in seven cases (10%): five type I (7%) and two type II (3%). Over a mean 35 month follow up (range 3-95 months), secondary endoleak was detected in two patients (3%), both type I, and stent graft migration was seen in three patients. Mal-positioning varied from 2 to 15 mm. A cutoff value of 11 mm was identified as an adverse event risk. Univariate analysis showed that TI and LZ were significantly associated with mal-positioning (p = .01, p = .04 respectively), and that aortic angulation tends to reach significance (p = .08). No influence of deployment mechanism (p = .50) or stent graft generation (p = .71) or access-related factors was observed. Multivariate analysis identified TI as the unique independent risk factor of mal-positioning (OR 241, 95% CI 1-6,149, p = .05). A TI >1.68 was optimal for inaccurate deployment prediction. CONCLUSION: TI calculation can be useful to anticipate difficulties during stent graft deployment and to reduce mal-positioning.

Risk Factor Analysis of Bird Beak Occurrence after Thoracic Endovascular Aortic Repair.

OBJECTIVES: The aim was to analyze the role played by anatomy and stent graft in the incidence of incomplete apposition to aortic arch. METHODS: Between 2007 and 2014 data including available and suitable computed tomographic angiography (CTA) imaging of patients who had undergone thoracic endovascular aortic repair were reviewed. The study included 80 patients (65 men, 54 ± 21 years) treated for traumatic aortic rupture (n = 27), thoracic aortic aneurysm (n = 15), type B aortic dissection (n = 24), penetrating aortic ulcer (n = 5), intramural hematoma (n = 2), aorto-oesophageal fistula (n = 2), and aortic mural thrombus (n = 5). Pre- and post-operative CTA images were analyzed to characterize bird beak in terms of length and angle, and to calculate aortic angulation within a 30 mm range at the proximal deployment zone. RESULTS: Bird beak configuration was detected in 46 patients (57%): mean stent protrusion length was 16 mm (range: 8-29 mm) and mean bird beak angle was 20° (range: 7-40°). The bird beak effect was significantly more frequent after traumatic aortic rupture treatment (p = .05) and in landing zone 2 (p = .01). No influence of either stent graft type or generation, or degree of oversizing was observed (p = .29, p = .28, p = .81 respectively). However, the mean aortic angle of patients with bird beak was higher in the Pro-form group than that in the Zenith TX2 group (62° vs. 48°, p = .13). Multivariate analysis identified the aortic angle of the deployment zone as the unique independent risk factor of malapposition (HR = 1.05, 95% CI 1-1.10, p = .005). The cutoff value of 51° was found to be predictive of bird beak occurrence with a sensitivity of 58% and a specificity of 85%. CONCLUSIONS: Assessment of proximal landing zone morphology to avoid deployment zones generating an aortic angle of over 50° can be recommended to improve aortic curvature apposition with the current available devices.

In-plane mechanics of soft architectured fibre-reinforced silicone rubber membranes.

Silicone rubber membranes reinforced with architectured fibre networks were processed with a dedicated apparatus, allowing a control of the fibre content and orientation. The membranes were subjected to tensile loadings combined with continuous and discrete kinematical field measurements (DIC and particle tracking). These tests show that the mechanical behaviour of the membranes is hyperelastic at the first order. They highlight the influence of the fibre content and orientation on both the membrane in-plane deformation and stress levels. They also prove that for the considered fibrous architectures and mechanical loadings, the motion and deformation of fibres is an affine function of the macroscale transformation. These trends are fairly well described by the micromechanical model proposed recently in Bailly et al. (JMBBM, 2012). This result proves that these materials are very good candidates for new biomimetic membranes, e.g. to improve aortic analogues used for in vitro experiments, or existing textiles used for vascular (endo)prostheses.

New experimental protocols for tensile testing of abdominal aortic analogues.

This work proposes an in vitro tensile testing protocol that is able to characterize abdominal aortic (AA) analogues under physiologically inspired mechanical loadings. Kinematic parameters are defined in agreement with in vivo measurements of aortic dynamics. A specific focus is given to the choice of the applied loading rates, deriving from the knowledge of aortic Peterson modulus and blood pressure variations from diastolic to systolic instants. The influence of physiological elongation rates has been tested on both porcine AAs and a thermoplastic polyurethane (TPU) material used to elaborate AA analogues. The diastolic and systolic elongation rates estimates vary between orders of magnitude O(10(-2)) and O(10(-1))s(-1). Negligible differences are obtained when comparing stress-elongation responses between both physiological elongation rates. In contrast, a noticeable stiffening of the TPU mechanical response is observed compared to that obtained under the common low traction rate of O(10(-3))s(-1). This work shows how relevant physiological elongation rates can be evaluated as a function of age, gender and pathological context.

Towards a biomimetism of abdominal healthy and aneurysmal arterial tissues.

The aim of this work is to develop a new hyperelastic and anisotropic material mimicking histological and mechanical features of healthy and aneurysmal arterial tissues. The material is constituted by rhombic periodic lattices of hyperelastic fibres embedded into a soft elastomer membrane. To fit bi-axial experimental data obtained from the literature, with normal or pathologic human abdominal aortic tissues, the microstructure of the periodic lattices (fibre length, angle between fibres) together with the mechanical behaviour of the fibres (fibre tension-elongation curve) were optimised by using theoretical results arising from a multi-scale homogenisation process. It is shown that (i) a material constituted by only one periodic lattice of fibres is clearly not sufficient to describe all the experimental data set, (ii) a quantitative agreement between measurements and theoretical predictions is obtained by using a material with two fibre lattices, (iii) the optimised microstructures and mechanical properties of the fibrous lattices are strongly different for the abdominal healthy and aneurysmal arterial tissues, (iv) the anisotropic mechanical behaviour of the optimised material is described by only five parameters and (v) the optimal angles between fibres in the case of the healthy aorta are consistent with histological data. Several technical solutions of fibres can be considered as relevant candidates: this is illustrated in the particular cases of straight and wavy fibres.

Three-dimensional numerical simulations of physiological flows in a stented coronary bifurcation.

When atherosclerotic lesions are found within a coronary bifurcation, a double stent implantation is sometimes required to treat the disease of each branch. The clinical procedure can result in the positioning of several stents in the bifurcation. In the study, physiological flows in typical configurations of such stented coronary bifurcations were numerically modelled using the finite volumes method. Two deployed Palmaz stents were inserted in a 90 degrees coronary bifurcation, simulating a double stent implantation. As the geometric position of the metallic stent cells can vary, several models of broken cells were proposed and compared to characterise the influence of the stent struts protruding into the collateral branch. Flow features in the bifurcation surroundings changed from one model to another. These changes could lead to the occurrence of flow stasis and also of recirculation areas downstream from the struts, depending on the way the strut was opened. The stent struts protruding into the lumen of the collateral branch induced high values of shear stress at the stent wall of about 20 N m(-2), which could stimulate platelet activation. In addition, these areas of high shear stress values were concomitant with areas of low shear stress values of about 0.5 Nm(-2). These regions could be prone to platelet adhesion and so to thrombo-embolic complications. The analysis of the flow field indicated that it would be judicious to use dedicated bifurcated stents to treat bifurcation lesions.

Numerical simulations of unsteady flows in a stenosed coronary bypass graft.

Using the finite element method, physiological blood flows through a three-dimensional model of a coronary graft are numerically analysed. The model includes a stenosis shape in the host artery upstream from the anastomosis. Recirculating areas, secondary flows, wall shear stress (WSS) and spatial wall shear stress gradients (WSSGs) are studied for different flow repartitions and at different times in the cycle. The temporal and spatial evolutions of the recirculating areas downstream from the stenosis, their interactions with the flow issued from the graft and their associated WSSs highlight that the presence of the stenosis in the recipient artery is essential for prediction of the evolution of a grafting at the beginning of its implantation. The areas downstream from the stenosis expansion, non-existent for a host artery without stenosis, are submitted to low and oscillating WSS between -0.5 and 0 Nm(-2). The stagnation point on the recipient artery floor is subjected to high positive and negative WSSGnd values, and its location is dependent on the residual flow through the stenosis.

Numerical and experimental models of post-operative realistic flows in stenosed coronary bypasses.

By means of both experimental and finite element methods, we simulated three-dimensional unsteady flows through coronary bypass anastomosis. The host artery includes a stenosis shape located at two different distances of grafting. The inflow rates are issued from in vivo measurements in patients who had undergone coronary bypass surgery a few days before. We provide a comparison between experimental and numerical velocity profiles coupled with the numerical analysis of spatial and temporal wall shear stress evolution. The interaction between the graft and coronary flows has been demonstrated. The phase inflow difference can partly be responsible for specific flow phenomena: jet deflection towards a preferential wall or feedback phenomenon that causes the flapping of the post-stenotic jet during the cardiac cycle. In conclusion, we showed the sensitivity of these typical flows to distance of grafting, inflows waveforms but also to their phase difference.