The equivalence of different types of electric pulses for electrochemotherapy with cisplatin - an in vitro study.

BACKGROUND: Electrochemotherapy (ECT) is a treatment involving the administration of chemotherapeutics drugs followed by the application of 8 square monopolar pulses of 100 µs duration at a repetition frequency of 1 Hz or 5000 Hz. However, there is increasing interest in using alternative types of pulses for ECT. The use of high-frequency short bipolar pulses has been shown to mitigate pain and muscle contractions. Conversely, the use of millisecond pulses is interesting when combining ECT with gene electrotransfer for the uptake of DNA-encoding proteins that stimulate the immune response with the aim of converting ECT from a local to systemic treatment. Therefore, the aim of this study was to investigate how alternative types of pulses affect the efficiency of the ECT. MATERIALS AND METHODS: We performed in vitro experiments, exposing Chinese hamster ovary (CHO) cells to conventional ECT pulses, high-frequency bipolar pulses, and millisecond pulses in the presence of different concentrations of cisplatin. We determined cisplatin uptake by inductively coupled plasma mass spectrometry and cisplatin cytotoxicity by the clonogenic assay. RESULTS: We observed that the three tested types of pulses potentiate the uptake and cytotoxicity of cisplatin in an equivalent manner, provided that the electric field is properly adjusted for each pulse type. Furthermore, we quantified that the number of cisplatin molecules, resulting in the eradication of most cells, was 2-7 × 107 per cell. CONCLUSIONS: High-frequency bipolar pulses and millisecond pulses can potentially be used in ECT to reduce pain and muscle contraction and increase the effect of the immune response in combination with gene electrotransfer, respectively.

Characterization of Experimentally Observed Complex Interplay between Pulse Duration, Electrical Field Strength, and Cell Orientation on Electroporation Outcome Using a Time-Dependent Nonlinear Numerical Model.

Electroporation is a biophysical phenomenon involving an increase in cell membrane permeability to molecules after a high-pulsed electric field is applied to the tissue. Currently, electroporation is being developed for non-thermal ablation of cardiac tissue to treat arrhythmias. Cardiomyocytes have been shown to be more affected by electroporation when oriented with their long axis parallel to the applied electric field. However, recent studies demonstrate that the preferentially affected orientation depends on the pulse parameters. To gain better insight into the influence of cell orientation on electroporation with different pulse parameters, we developed a time-dependent nonlinear numerical model where we calculated the induced transmembrane voltage and pores creation in the membrane due to electroporation. The numerical results show that the onset of electroporation is observed at lower electric field strengths for cells oriented parallel to the electric field for pulse durations ≥10 µs, and cells oriented perpendicular for pulse durations ~100 ns. For pulses of ~1 µs duration, electroporation is not very sensitive to cell orientation. Interestingly, as the electric field strength increases beyond the onset of electroporation, perpendicular cells become more affected irrespective of pulse duration. The results obtained using the developed time-dependent nonlinear model are corroborated by in vitro experimental measurements. Our study will contribute to the process of further development and optimization of pulsed-field ablation and gene therapy in cardiac treatments.

A Multiscale Computational Model of Skeletal Muscle Electroporation Validated Using In Situ Porcine Experiments.

OBJECTIVE: The goal of our study was to determine the importance of electric field orientation in an anisotropic muscle tissue for the extent of irreversible electroporation damage by means of an experimentally validated mathematical model. METHODS: Electrical pulses were delivered to porcine skeletal muscle in vivo by inserting needle electrodes so that the electric field was applied in direction either parallel or perpendicular to the direction of the muscle fibres. Triphenyl tetrazolium chloride staining was used to determine the shape of the lesions. Next, we used a single cell model to determine the cell-level conductivity during electroporation, and then generalised the calculated conductivity changes to the bulk tissue. Finally, we compared the experimental lesions with the calculated field strength distributions using the Sørensen-Dice similarity coefficient to find the contours of the electric field strength threshold beyond which irreversible damage is thought to occur. RESULTS: Lesions in the parallel group were consistently smaller and narrower than lesions in the perpendicular group. The determined irreversible threshold of electroporation for the selected pulse protocol was 193.4 V/cm with a standard deviation of 42.1 V/cm, and was not dependent on field orientation. CONCLUSION: Muscle anisotropy is of significant importance when considering electric field distribution in electroporation applications. SIGNIFICANCE: The paper presents an important advancement in building up from the current understanding of single cell electroporation to an in silico multiscale model of bulk muscle tissue. The model accounts for anisotropic electrical conductivity and has been validated through experiments in vivo.

High-Intensity Pulsed Electromagnetic Field-Mediated Gene Electrotransfection In Vitro.

A high-intensity pulsed electromagnetic field (HI-PEMF) is a non-invasive and non-contact delivery method and may, as such, have an advantage over gene electrotransfer mediated by conventional electroporation using contact electrodes. Due to the limited number of in vitro studies in the field of gene electrotransfection by HI-PEMF, we designed experiments to investigate and demonstrate the feasibility of such a technique for the non-viral delivery of genetic material into cells in vitro. We first showed that HI-PEMF causes DNA adsorption to the membrane, a generally accepted prerequisite step for successful gene electrotransfection. We also showed that HI-PEMF can induce gene electrotransfection as the application of HI-PEMF increased the percentage of GFP-positive cells for two different combinations of pDNA size and concentration. Furthermore, by measuring the uptake of larger molecules, i.e., fluorescently labelled dextrans of three different sizes, we showed endocytosis to be a possible mechanism for introducing large molecules into cells by HI-PEMF.

Design, Development, and Testing of a Device for Gene Electrotransfer to Skin Cells In Vivo.

Gene electrotransfer (GET) is considered one of the most efficient, safe, reproducible, and cost-effective methods of gene therapy, in which a gene is delivered to the cells in the form of a plasmid DNA vector by a method known as electroporation. To achieve successful electroporation, cells must be exposed to sufficiently high electric fields generated by short-duration, high-voltage electrical pulses that result in a temporary increase in plasma membrane permeability. The electrical pulses are generated by pulse generators (electroporators) and delivered to the cells via electrodes (applicators). However, there is a lack of standardized pulse delivery protocols as well as certified clinical pulse generators and applicators for gene delivery. In this paper, the development of a new pulse generator, applicator, and pulse delivery protocol for GET to skin cells is presented. A numerical model of electroporated skin developed and tested for two electrode configurations and two different pulse delivery protocols is also presented. An alternative pulse delivery protocol was proposed. The developed pulse generator, applicator, and the proposed pulse delivery protocol were then used in vivo for GET to skin cells in mice. The results showed high efficiency of the proposed pulse delivery protocol for the purpose of GET in mouse skin cells. Specifically, electroporation with the developed pulse generator, applicator, and proposed pulse delivery protocol resulted in higher gene expression in skin cells compared to the currently used pulse generator, applicator, and pulse delivery protocol.

Models of electroporation and the associated transmembrane molecular transport should be revisited.

Electroporation has become a powerful tool for nonviral delivery of various biomolecules such as nucleic acids, proteins, and chemotherapeutic drugs to virtually any living cell by exposing the cell membrane to an intense pulsed electric field. Different multiphysics and multiscale models have been developed to describe the phenomenon of electroporation and predict molecular transport through the electroporated membrane. In this paper, we critically examine the existing mechanistic, single-cell models which allow spatially and temporally resolved numerical simulations of electroporation-induced transmembrane transport of small molecules by confronting them with different experimental measurements. Furthermore, we assess whether any of the proposed models is universal enough to describe the associated transmembrane transport in general for all the different pulse parameters and small molecules used in electroporation applications. We show that none of the tested models can be universally applied to the full range of experimental measurements. Even more importantly, we show that none of the models has been compared to sufficient amount of experimental data to confirm the model validity. Finally, we provide guidelines and recommendations on how to design and report experiments that can be used to validate an electroporation model and how to improve the development of mechanistic models.

Short microsecond pulses achieve homogeneous electroporation of elongated biological cells irrespective of their orientation in electric field.

In gene electrotransfer and cardiac ablation with irreversible electroporation, treated muscle cells are typically of elongated shape and their orientation may vary. Orientation of cells in electric field has been reported to affect electroporation, and hence electrodes placement and pulse parameters choice in treatments for achieving homogeneous effect in tissue is important. We investigated how cell orientation influences electroporation with respect to different pulse durations (ns to ms range), both experimentally and numerically. Experimentally detected electroporation (evaluated separately for cells parallel and perpendicular to electric field) via Ca2+ uptake in H9c2 and AC16 cardiomyocytes was numerically modeled using the asymptotic pore equation. Results showed that cell orientation affects electroporation extent: using short, nanosecond pulses, cells perpendicular to electric field are significantly more electroporated than parallel (up to 100-times more pores formed), and with long, millisecond pulses, cells parallel to electric field are more electroporated than perpendicular (up to 1000-times more pores formed). In the range of a few microseconds, cells of both orientations were electroporated to the same extent. Using pulses of a few microseconds lends itself as a new possible strategy in achieving homogeneous electroporation in tissue with elongated cells of different orientation (e.g. electroporation-based cardiac ablation).

Mechanistic view of skin electroporation - models and dosimetry for successful applications: an expert review.

Introduction: Skin electroporation is a promising treatment for transdermal drug delivery, gene electrotransfer, skin rejuvenation, electrochemotherapy, and wound disinfection. Although a considerable amount of in vitro and in vivo studies exists, the translation to clinics is not as fast as one would hope. We hypothesize the reason lies in the inadequate dosimetry, i.e. electrode configurations, pulse parameters, and pulse generators used. We suggest adequate dosimetry can be determined by mathematical modeling which would allow comparison of protocols and facilitate translation into clinics.Areas covered: We introduce the mechanisms and applications of skin electroporation, present existing mathematical models and compare the influence of different model parameters. We review electrodes and pulse generators, prototypes, as well as commercially available models.Expert opinion: The reasons for slow translation of skin electroporation treatments into clinics lie in uncontrolled and inadequate dosimetry, poor reporting rendering comparisons between studies difficult, and significant differences in animal and human skin morphology often dismissed in reports. Mathematical models enable comparison of studies, however, when the parameters of the pulses and electrode configuration are not adequately reported, as is often the case, comparisons are difficult, if not impossible. For each skin electroporation treatment, systematic studies determining optimal parameters should be performed and treatment parameters standardized.

Experimental and Numerical Study of Electroporation Induced by Long Monopolar and Short Bipolar Pulses on Realistic 3D Irregularly Shaped Cells.

In this article, the reversible electroporation induced by rectangular long unipolar and short bipolar voltage pulses on 3D cells is studied. The cell geometry was reconstructed from 3D images of real cells obtained using the confocal microscopy technique. A numerical model based on the Maxwell and the asymptotic Smoluchowski equations has been developed to calculate the induced transmembrane voltage and pore density on the plasma membrane of real cells exposed to the pulsed electric field. Moreover, in the case of the high-frequency pulses, the dielectric dispersion of plasma membranes has been taken into account using the second-order Debye-based relationship. Several numerical simulations were performed and we obtained suitable agreement between the numerical and experimental results.

Cancellation effect is present in high-frequency reversible and irreversible electroporation.

It was recently suggested that applying high-frequency short biphasic pulses (HF-IRE) reduces pain and muscle contractions in electrochemotherapy and irreversible ablation treatments; however, higher amplitudes with HF-IRE pulses are required to achieve a similar effect as with monophasic pulses. HF-IRE pulses are in the range of a microseconds, thus, the so-called cancellation effect could be responsible for the need to apply pulses of higher amplitudes. In cancellation effect, the effect of first pulse is reduced by the second pulse of opposite polarity. We evaluated cancellation effect with high-frequency biphasic pulses on CHO-K1 in different electroporation buffers. We applied eight bursts of 1-10 µs long pulses with inter-phase delays of 0.5 µs - 10 ms and evaluated membrane permeability and cell survival. In permeability experiments, cancellation effect was not observed in low-conductivity buffer. Cancellation effect was, however, observed in treatments with high-frequency biphasic pulses looking at survival in all of the tested electroporation buffers. In general, cancellation effect depended on inter-phase delay as well as on pulse duration, i.e. longer pulses and longer interphase delay cause less pronounced cancellation effect. Cancellation effect could be partially explained by the assisted discharge and not by the hyperpolarization by the chloride channels.

Me2SO- and serum-free cryopreservation of human umbilical cord mesenchymal stem cells using electroporation-assisted delivery of sugars.

Cryopreservation is the universal technology used to enable long-term storage and continuous availability of cell stocks and tissues for regenerative medicine demands. The main components of standard freezing media are dimethyl sulfoxide (hereinafter Me2SO) and fetal bovine serum (FBS). However, for manufacturing of cells and tissue-engineered products in accordance with the principles of Good Manufacturing Practice (GMP), current considerations in regenerative medicine suggest development of Me2SO- and serum-free biopreservation strategies due to safety concerns over Me2SO-induced side effects and immunogenicity of animal serum. In this work, the effect of electroporation-assisted pre-freeze delivery of sucrose, trehalose and raffinose into human umbilical cord mesenchymal stem cells (hUCMSCs) on their post-thaw survival was investigated. The optimal strength of electric field at 8 pulses with 100 µs duration and 1 Hz pulse repetition frequency was determined to be 1.5 kV/cm from permeabilization (propidium iodide uptake) vs. cell recovery data (resazurin reduction assay). Using sugars as sole cryoprotectants with electroporation, concentration-dependent increase in cell survival was observed. Irrespective of sugar type, the highest cell survival (up to 80%) was achieved at 400 mM extracellular concentration and electroporation. Cell freezing without electroporation yielded significantly lower survival rates. In the optimal scenario, cells were able to attach 24 h after thawing demonstrating characteristic shape and sugar-loaded vacuoles. Application of 10% Me2SO/90% FBS as a positive control provided cell survival exceeding 90%. Next, high glass transition temperatures determined for optimal concentrations of sugars by differential scanning calorimetry (DSC) suggest the possibility to store samples at -80 °C. In summary, using electroporation to incorporate cryoprotective sugars into cells is an effective strategy towards Me2SO- and serum-free cryopreservation and may pave the way for further progress in establishing clinically safe biopreservation strategies for efficient long-term biobanking of cells.

The use of high-frequency short bipolar pulses in cisplatin electrochemotherapy in vitro.

Background In electrochemotherapy (ECT), chemotherapeutics are first administered, followed by short 100 µs monopolar pulses. However, these pulses cause pain and muscle contractions. It is thus necessary to administer muscle relaxants, general anesthesia and synchronize pulses with the heart rhythm of the patient, which makes the treatment more complex. It was suggested in ablation with irreversible electroporation, that bursts of short high-frequency bipolar pulses could alleviate these problems. Therefore, we designed our study to verify if it is possible to use high-frequency bipolar pulses (HF-EP pulses) in electrochemotherapy. Materials and methods We performed in vitro experiments on mouse skin melanoma (B16-F1) cells by adding 1-330 µM cisplatin and delivering either (a) eight 100 µs long monopolar pulses, 0.4-1.2 kV/cm, 1 Hz (ECT pulses) or (b) eight bursts at 1 Hz, consisting of 50 bipolar pulses. One bipolar pulse consisted of a series of 1 µs long positive and 1 µs long negative pulse (0.5-5 kV/cm) with a 1 µs delay in-between. Results With both types of pulses, the combination of electric pulses and cisplatin was more efficient in killing cells than cisplatin or electric pulses only. However, we needed to apply a higher electric field in HF-EP (3 kV/cm) than in ECT (1.2 kV/cm) to obtain comparable cytotoxicity. Conclusions It is possible to use HF-EP in electrochemotherapy; however, at the expense of applying higher electric fields than in classical ECT. The results obtained, nevertheless, offer an evidence that HF-EP could be used in electrochemotherapy with potentially alleviated muscle contractions and pain.

Nonlinear Dispersive Model of Electroporation for Irregular Nucleated Cells.

In this work, the electroporation phenomenon induced by pulsed electric field on different nucleated biological cells is studied. A nonlinear, non-local, dispersive, and space-time multiphysics model based on Maxwell's and asymptotic Smoluchowski's equations has been developed to calculate the transmembrane voltage and pore density on both plasma and nuclear membrane perimeters. The irregular cell shape has been modeled by incorporating in the numerical algorithm the analytical functions pertaining to Gielis curves. The dielectric dispersion of the cell media has been modeled considering the multi-relaxation Debye-based relationship. Two different irregular nucleated cells have been investigated and their response has been studied applying both the dispersive and non-dispersive models. By a comparison of the obtained results, differences can be highlighted confirming the need to make use of the dispersive model to effectively investigate the cell response in terms of transmembrane voltages, pore densities, and electroporation opening angle, especially when irregular cell shapes and short electric pulses are considered. Bioelectromagnetics. 2019;40:331-342. © 2019 Wiley Periodicals, Inc.

Connecting the in vitro and in vivo experiments in electrochemotherapy - a feasibility study modeling cisplatin transport in mouse melanoma using the dual-porosity model.

In electrochemotherapy two conditions have to be met to be successful - the electric field of sufficient amplitude and sufficient uptake of chemotherapeutics in the tumor. Current treatment plans only take into account critical electric field to achieve cell membrane permeabilization. However, permeabilization alone does not guarantee uptake of chemotherapeutics and consequently successful treatment. We performed a feasibility study to determine whether the transport of cisplatin in vivo could be calculated based on experiments performed in vitro. In vitro, a spectrum of parameters can be explored without ethical issues. Mouse melanoma B16-F1 cell suspension and inoculated B16-F10 tumors were exposed to electric pulses in the presence of chemotherapeutic cisplatin. The uptake of cisplatin was measured by inductively coupled plasma mass spectrometry. We modeled the transport of cisplatin with the dual-porosity model, which is based on the diffusion equation, connects pore formation with membrane permeability, and includes transport between several compartments. In our case, there were three compartments - tumor cells, interstitial fraction and peritumoral region. Our hypothesis was that in vitro permeability coefficient could be introduced in vivo, as long as tumor physiology was taken into account. Our hypothesis was confirmed as the connection of in vitro and in vivo experiments was possible by introducing a transformation coefficient which took into account the in vivo characteristics, i.e., smaller available area of the plasma membrane for transport due to cell density, presence of cell-matrix in vivo, and reduced drug mobility. We thus show that it is possible to connect in vitro and in vivo experiments of electrochemotherapy. However, more experimental work is required for model validation.

Plasma membrane depolarization and permeabilization due to electric pulses in cell lines of different excitability.

In electroporation-based medical treatments, excitable tissues are treated, either intentionally (irreversible electroporation of brain cancer, gene electrotransfer or ablation of the heart muscle, gene electrotransfer of skeletal muscles), or unintentionally (excitable tissues near the target area). We investigated how excitable and non-excitable cells respond to electric pulses, and if electroporation could be an effective treatment of the tumours of the central nervous system. For three non-excitable and one excitable cell line, we determined a strength-duration curve for a single pulse of 10ns-10ms. The threshold for depolarization decreased with longer pulses and was higher for excitable cells. We modelled the response with the Lapicque curve and the Hodgkin-Huxley model. At 1µs a plateau of excitability was reached which could explain why high-frequency irreversible electroporation (H-FIRE) electroporates but does not excite cells. We exposed cells to standard electrochemotherapy parameters (8×100µs pulses, 1Hz, different voltages). Cells behaved similarly which indicates that electroporation most probably occurs at the level of lipid bilayer, independently of the voltage-gated channels. These results could be used for optimization of electric pulses to achieve maximal permeabilization and minimal excitation/pain sensation. In the future, it should be established whether the in vitro depolarization correlates to nerve/muscle stimulation and pain sensation in vivo.

From Cell to Tissue Properties-Modeling Skin Electroporation With Pore and Local Transport Region Formation.

Current models of tissue electroporation either describe tissue with its bulk properties or include cell level properties, but model only a few cells of simple shapes in low-volume fractions or are in two dimensions. We constructed a three-dimensional model of realistically shaped cells in realistic volume fractions. By using a 'unit cell' model, the equivalent dielectric properties of whole tissue could be calculated. We calculated the dielectric properties of electroporated skin. We modeled electroporation of single cells by pore formation on keratinocytes and on the papillary dermis which gave dielectric properties of the electroporated epidermis and papillary dermis. During skin electroporation, local transport regions are formed in the stratum corneum. We modeled local transport regions and increase in their radii or density which affected the dielectric properties of the stratum corneum. The final model of skin electroporation accurately describes measured electric current and voltage drop on the skin during electroporation with long low-voltage pulses. The model also accurately describes voltage drop on the skin during electroporation with short high-voltage pulses. However, our results indicate that during application of short high-voltage pulses additional processes may occur which increase the electric current. Our model connects the processes occurring at the level of cell membranes (pore formation), at the level of a skin layer (formation of local transport region in the stratum corneum) with the tissue (skin layers) and even level of organs (skin). Using a similar approach, electroporation of any tissue can be modeled, if the morphology of the tissue is known.