Remediation of heavy metal-contaminated forest soil using recycled organic matter and native woody plants.

The main aim of this study was to determine how the application of a mulch cover (a mixture of household biocompost and woodchips) onto heavy metal-polluted forest soil affects (i) long-term survival and growth of planted dwarf shrubs and tree seedlings and (ii) natural revegetation. Native woody plants (Pinus sylvestris, Betula pubescens, Empetrum nigrum, and Arctostaphylos uva-ursi) were planted in mulch pockets on mulch-covered and uncovered plots in summer 1996 in a highly polluted Scots pine stand in southwest Finland. Spreading a mulch layer on the soil surface was essential for the recolonization of natural vegetation and increased dwarf shrub survival, partly through protection against drought. Despite initial mortality, transplant establishment was relatively successful during the following 10 yr. Tree species had higher survival rates, but the dwarf shrubs covered a larger area of the soil surface during the experiment. Especially E. nigrum and P. sylvestris proved to be suitable for revegetating heavy metal-polluted and degraded forests. Natural recolonization of pioneer species (e.g., Epilobium angustifolium, Taraxacum coll., and grasses) and tree seedlings (P. sylvestris, Betula sp., and Salix sp.) was strongly enhanced on the mulched plots, whereas there was no natural vegetation on the untreated plots. These results indicate that a heavy metal-polluted site can be ecologically remediated without having to remove the soil. Household compost and woodchips are low-cost mulching materials that are suitable for restoring heavy metal-polluted soil.

In situ bioremediation through mulching of soil polluted by a copper-nickel smelter.

Bioremediation of a heavy metal-polluted soil was investigated in a 3-yr field experiment by adding mulch to a polluted forest floor. The mulch consisted of a mixture of compost and woodchips. The remediation treatment decreased the toxicity of the soil solution to bacteria as determined by the [3H]-thymidine incorporation technique, that is, by measuring the growth rate of soil bacteria extracted from unpolluted humus after exposing them to soil solution containing heavy metals from the experimental plots. Canonical correlation analysis was performed in order to identify the chemical and microbiological changes in the soil. The pH of the mulched organic layer increased by one unit. The concentration of complexed Cu increased and that of free Cu2+ decreased in the soil solution from the mulch treatment. According to basal respiration and litter decomposition, microbial activity increased during the 3 yr following the remediation treatment. The [3H]-thymidine incorporation technique was also used to study the growth rate and tolerance of bacteria to Cu. The bacterial growth rate increased and the Cu tolerance decreased on the treated plots. The structure of the microbial community, as determined by phospholipid fatty acid (PLFA) analysis, remained unchanged. The results indicate that remediation of the polluted soil had occurred, and that adding a mulch to the forest floor is a suitable method for remediating heavy metal-polluted soil.

Understorey vegetation along a heavy-metal pollution gradient in SW Finland.

Understorey vegetation of Scots pine forests was studied along a 8-km transect running SE from a Cu-Ni smelter at Harjavalta, SW Finland. Long-term accumulation of heavy metals and sulphur in the forest ecosystem has drastically changed plant communities. Vegetation was almost absent up to a distance of 0.5 km from the smelter. The total coverage and the number of plant species increased with increasing distance from the smelter. Ordination by global non-metric multidimensional scaling (GNMDS) indicated that the floristic composition was differentiated in response to the pollution level. The main compositional gradient of GNMDS was correlated with the heavy metal concentrations in the organic soil layer and with the size of the overstorey trees. Vascular plants were more pollution-resistant than ground lichens, whereas mosses were the most sensitive plant group. In addition to heavy metals, nutrient imbalances and the considerably reduced water-holding capacity of the surface soil also restrict plant recolonisation on the degraded sites.

Element distribution in Empetrum nigrum microsites at heavy metal contaminated sites in Harjavalta, western Finland.

Small-scale element distribution in soil-plant-systems in patches of Empetrum nigrum (microsites) at heavy metal contaminated sites located 0.5 and 4 km from the copper-nickel smelter at Harjavalta was investigated. The Cu concentrations of E. nigrum varied between 12 and 2300 mg/kg dw and showed increasing accumulation with increasing tissue age. Stems contained more Cu than leaves of the same age. The distribution pattern of Ni and Pb in the above-ground biomass followed that of Cu. Roots contained relatively low concentrations of all airborne heavy metals. In the soil, the highest concentrations of total Cu occurred in the humus (Oh) layer: on average 49,450 mg/kg dw at 0.5 km distance and 12,025 mg/kg dw at 4.0 km. Despite the extremely high Cu concentrations in the topsoil, the concentrations in the mineral soil below a depth of 10 cm did not exceed 2.5 mg/kg dw at any site.

Detoxification and amelioration of heavy-metal contaminated forest soils by means of liming and fertilisation.

Four experiments were established in 1992 in Scots pine stands (Pinus sylvestris L.) on relatively infertile sites at distances of 0.5, 2, 4 and 8 km to the south-east of the Cu-Ni smelter at Harjavalta, south-west Finland, in order to investigate the effects of liming, correction fertiliser and site-specific fertiliser treatments on heavy metal (Cu, Ni) and macronutrient (Ca, Mg, K) availability in the organic layer. The organic layer samples were analysed for total, plant-available (BaCl(2)+EDTA) and water-extractable Ca, Mg, K, Cu and Ni. A high proportion of the Cu and Ni at 0.5 km was in a non-toxic, immobilised form. Liming had only a relatively small reducing effect on free and exchangeable Cu and Ni concentrations at 0.5 km. The lack of pH increase following liming may be due to the precipitation of Fe, present in very high concentrations close to the smelter, as Fe(OH)(3), resulting in the loss of neutralising bicarbonate and hydroxyl ions, but the release of Ca and Mg. Liming strongly increased Ca and Mg availability. The correction fertiliser had no effect on Ca or K availability at any of the sites.

Comparison study of five analytical methods for the fractionation and subsequent determination of aluminium in natural water samples.

Five methods for aluminium fractionation used in different laboratories in Norway and Finland were compared using six control, 75 soil water and 10 lake water samples. Different fractionation principles [cation exchange, formation of the Pyrocatechol Violet (PCV) or quinolin-8-ol (oxine) complex], types of cation exchanger [Amberlite (Na/H) or Bond Elut (H)], reaction time (from 2.3 s), flow systems (flow injection analysis or segmented flow) and determination principles (molecular absorption spectrometry or ICP-AES) were tested. Determination of the 'labile' fraction was strongly dependent on the method used and the largest differences were observed between the ICP-AES method with cation exchange (Bond Elut H form) and the 'quickly reacting' method (oxine, 2.3 s). Different flow systems, both using cation exchange and determination of the PCV complex but with different reaction times and an extra acidification step, resulted in large differences in the 'reactive' and 'non-labile' fractions determined. However, the determination of the labile fraction gave similar results with both these methods. The two different types of cation exchanger used (with and without pH buffering and with different counter ions) in the ICP-AES methods resulted in differences, mainly because of a smaller 'non-labile' fraction in the non-buffered system. The two flow injection systems (oxine and PCV complexation) showed common trends, which may be connected with the short reaction times used. Comparison with theoretical equilibrium calculations using the model ALCHEMI suggested that the best correlation for the determination of the 'labile' fraction were obtained with the ICP-AES method with an Amberlite column.

Interactions between precipitation and Scots pine canopies along a heavy-metal pollution gradient.

Bulk precipitation and stand throughfall were collected during 1992-96 at distances of 0.5, 4 and 8 km from the Harjavalta Cu-Ni smelter, southwestern Finland. The amounts of heavy metals (Cu, Ni, Zn, Fe) and mineral nutrients in bulk precipitation and throughfall were highest at 0.5 km. Although the canopy coverage was low at 0.5 km, the amounts of heavy metals intercepted by the canopy were extremely high. The proportion of foliar leaching relative to the wash-off of dry deposition from the needle surfaces decreased on moving towards the smelter for all elements, except for K. The high rate of K leaching from the needle tissues close to the smelter demonstrated that the K throughfall flux has been greatly altered by the heavy pollution load.

Effects of heavy metal contamination on macronutrient availability and acidification parameters in forest soil in the vicinity of the Harjavalta Cu-Ni smelter, SW Finland.

Four experiments were established (1992) in Scots pine stands at distances of 0.5, 2, 4 and 8 km along a line running to the SE of the Cu-Ni smelter at Harjavalta, SW Finland, in order to investigate the effects of Cu and Ni emissions on macronutrient availability and estimates of cation exchange capacity (CEC) and base saturation (BS). The accumulation of Cu and Ni (total, exchangeable) in forest soil close to the smelter has resulted in a deficit of base cations (exchangeable Ca, Mg, K and BS) in the organic layer caused by inhibition of mineralisation and the displacement of base cations from cation exchange sites by Cu and Ni cations. No signs of soil acidification were found in the topmost layers of the soil measured as a change in pH, exchangeable acidity and Al. The determination of CEC by the summation method in heavy-metal polluted forest soils is not recommended unless heavy metal cations are also included in the calculations.

A new model of the acoustic reflex.

A system-type model of the acoustic reflex in man is proposed with the intention of sheding light on certain of its nonlinear behaviors. This model is the first to incorporate into the multipath structure of the reflex arc the adaptation and recovery processes. Parameter distribution in the parallel pathways is based on the current knowledge on the stapedius muscle and on motoneuron pool organization. A piecewise linear system is used in modeling adaptation at onset and recovery at offset. The model is calibrated at 2000 Hz, a frequency for which all the important parameters are available. Two nonlinear behaviors of the adaptation rate are explained: the frequency and intensity dependence, related respectively to the frequency dependence of the feedback gain and to the sigmoidal shape of the closed-loop stimulus-response curve. Underlying physiological mechanisms are discussed, along with other plausible nonlinear models, and extensions of the model to other stimuli are suggested.

Mathematical model of visual perception.

A mathematical model of visual perception is presented with the intention of throwing some light on the problem of perceptual invariance. Two types of differential manifolds (receptive and effector) are associated with the repertoire which is the fundamental concept in the model. The elements of the repertoire carry weights which control the input-output relation in the repertoire and which can be modified by a learning process. It is shown that, under reasonable conditions, these repertoires possess good stability properties and can adjust to the various environments to which they may be subjected. In particular cases, it is shown that the stochastic learning process can be considered as deterministic to a first approximation.