Two-photon-triggered drug delivery in cancer cells using nanoimpellers.

A therapy of cancer cells: Two-photon-triggered camptothecin delivery with nanoimpellers was studied in MCF-7 breast cancer cells. A fluorophore with a high two-photon absorption cross-section was first incorporated in the nanoimpellers. Fluorescence resonance energy transfer (FRET) from the fluorophore to the azobenzene moiety was demonstrated.

One step synthesis of gold-loaded radial mesoporous silica nanospheres and supported lipid bilayer functionalization: towards bio-multifunctional sensors.

A simple synthetic route is developed to achieve gold functionalized radial mesoporous silica nanoparticles (Au-MsNP) synthesized by a one step procedure fully compatible with basic conditions required for the preparation of monodispersed nanospheres. In a second step, Au-MsNP particles have been coated with phospholipid bilayers in order to design an advanced biofunctional platform with the gold metallic nanoparticles previously grown into the pore channels and responsible for a plasmonic activity relevant for biosensing. The size of Au-MsNP is checked by dynamic light scattering while zeta potential measurements reflect their surface charge. The particle morphology is characterized by transmission and scanning electron microscopy and the Si/Au ratios are obtained from energy dispersive X-ray analysis. The textural properties of Au-MsNP, specific surface area and pore size, are determined from N(2) adsorption. The supported bilayers are achieved from vesicles of different phospholipids incubated with Au-MsNP particles. The coating efficiency is investigated by zeta potential and cryo- transmission electron microscopy. The plasmonic activities of bare Au-MsNP particles and coated lipid bilayer Au-MsNP platform are evidenced for two model systems: direct adsorption of bovine serum albumin and molecular recognition events between avidin molecules and biotin receptors integrated in the supported lipid bilayer.

Measurement of Uptake and Release Capacities of Mesoporous Silica Nanoparticles Enabled by Nanovalve Gates.

The uptake and release capacities of mesoporous silica particles are measured on nanovalve-gated stimulated release systems, using a water soluble biological stain, Hoechst 33342, as the cargo model. Five different types of mesoporous silica nanoparticles: 2D-hexagonal MCM-41, swollen pore MCM-41, rod-like MCM-41, hollow mesoporous nanoparticles and radial mesoporous nanoparticles are studied and compared. Solid silica nanoparticles are used as the control. Because of the presence of the nanovalves, the loaded and capped particles can be washed thoroughly without losing the content of the mesopores. The quantity of Hoechst 33342 molecules trapped within the nanoparticles and released upon opening the nanovalves are systematically studied for the first time. The loading conditions are optimized by varying the Hoechst concentration in the loading solutions. Surprisingly, increasing the Hoechst concentration in the loading solution does not always result in a larger amount of Hoechst being trapped and released. Among the five types of mesoporous silica nanoparticles, the radial mesoporous nanoparticles and the swollen pore MCM-41 particles show the highest and lowest release capacity, respectively. The uptake capacities is correlated with the specific surface area of the materials rather than their internal volume. The uptake and release behaviors are also affected by charge and spatial factors.

Silicalites and Mesoporous Silica Nanoparticles for photodynamic therapy.

The synthesis of silicalites and Mesoporous Silica Nanoparticles (MSN), which covalently incorporate original water-soluble photosensitizers for PDT applications is described. PDT was performed on MDA-MB-231 breast cancer cells. All the nanoparticles showed significant cell death after irradiation, which was not correlated with (1)O(2) quantum yield of the nanoparticles. Other parameters are involved and in particular the surface and shape of the nanoparticles which influence the pathway of endocytosis. Functionalization with mannose was necessary to obtain the best results with PDT due to an active endocytosis of mannose-functionalized nanoparticles. The quantity of mannose on the surface should be carefully adjusted as a too high amount of mannose impairs the phototoxicity of the nanoparticles. Fluorescein was also encapsulated in MCM-41 type MSN in order to localize the nanoparticles in the organelles of the cells by confocal microscopy. The MSN were localized in lysosomes after active endocytosis by mannose receptors.

Competitive solubilization of phenol by cationic surfactant micelles in the range of low additive and surfactant concentrations.

Competitive interactions of phenol (PhOH) with micellar aggregates of hexadecyltrimethylammonium bromide (HTAB) against 1-butanol (BuOH) in aqueous solutions at surfactant concentrations close to the critical micelle concentration (CMC), BuOH concentration of 0.5 mmol kg(-1), and phenol contents of 1, 5, or 10 mmol kg(-1) have been investigated at 303 K by means of (1)H NMR spectroscopy, titration calorimetry, and solution conductimetry. The solubilization loci for phenol were deduced from the composition-dependence of the (1)H chemical shifts assigned to various protons in the surfactant and additive units. Since in pure HTAB solutions phenol is already in competition with Br(-), addition of 1 mmol kg(-1) NaBr to the system weakens the phenol competitiveness. The presence of butanol in the HTAB micelles causes phenol to penetrate deeper toward the hydrophobic micelle core. For higher phenol contents, the butanol molecules are constrained to remain in the bulk solution and are progressively replaced within the HTAB micelles by the aromatic units. The competitive character of phenol solubilization against butanol is well supported by changes in the thermodynamic parameters of HTAB micellization in the presence of both of the additives.

Contribution of 1H NMR to the investigation of the adsorption of cationic Gemini surfactants with oligooxyethylene spacer group onto silica.

The present study aims to investigate the behavior of a series of cationic Gemini surfactants with a hydrophilic spacer at liquid-gas and solid-liquid interfaces, with particular emphasis on the effect of spacer length. Gemini surfactants containing two quaternary ammonium groups bound by an ethylene oxide spacer chain, referred to as 12-EO(x)-12 with x = 1,3,7 and 12 were synthesized. Surface tension measurements were used to show that the hydrophilic spacer with oxyethylene moieties was not fully extended at the air-water interface. With increasing the spacer group size, it became sufficiently flexible to adopt a particular conformation with a loop at the water side of the interface. A combined study by adsorption isotherm measurements and (1)H NMR spectroscopy allowed a detailed description of the adsorption mechanism of these investigated 12-EO(x)-12 surfactants, with NMR providing more precise information on the conformation of hydrophilic spacer at the solid-liquid interface. Binding to the silica surface involved one cationic headgroup for the surfactants with a short spacer and the two headgroups for the ones with a long spacer. The number of charged surface sites was estimated by considering the dimeric surfactant as a "molecular ruler." The small density of adsorption sites gave rise to the formation of pinned surface micelles.

Interactions of phenol with cationic micelles of hexadecyltrimethylammonium bromide studied by titration calorimetry, conductimetry, and 1H NMR in the range of low additive and surfactant concentrations.

Interactions of phenol (PhOH) with micellar aggregates of hexadecyltrimethylammonium bromide (HTAB) in aqueous solutions at surfactant concentrations close to the CMC and phenol contents of 1, 5, or 10 mmol kg(-1) have been investigated at 303 K by means of titration calorimetry, solution conductimetry, and (1)H NMR spectroscopy. Estimates of the main thermodynamic parameters related to HTAB micellization were made for PhOH/HTAB/H(2)O systems based on the specific conductivity measurements and calorimetric determination of the cumulative enthalpy of dilution as functions of the surfactant concentration at a fixed additive content. The combined analysis of the results obtained in H(2)O solutions pointed to the preferential location of PhOH in the outer micelle parts by an enthalpy-driven mechanism. Additional PhOH molecules were located increasingly deeper within the micelle core. The (1)H NMR study of PhOH solubilization by 1.5 mmol kg(-1) HTAB solutions in D(2)O indicated that the two categories of the solubilization site became saturated with the solubilizate already at the lowest additive content. Dissimilar amounts of the solubilized material in H(2)O and D(2)O solutions were ascribed to the difference in the initial micelle structures formed in the two solvents, as inferred from calorimetry and (1)H NMR studies of the HTAB micellization in D(2)O and H(2)O.

Copper-containing monodisperse mesoporous silica nanospheres by a smart one-step approach.

Copper-containing mesoporous silica spheres of size in the colloidal range with perfect conservation of pore-ordering, shape and monodispersity and high intra-pore metal dispersion were prepared via a new one-step synthesis and functionalisation route.

Aqueous behaviour of cationic surfactants containing a cleavable group.

The aggregation behaviour of two novel cationic RAFT agents (transfer surfactants); N,N-dimethyl-N-(4-(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium bromide (PCDBAB) and N-(4-((((dodecylthio)-carbonothioyl)thio)methyl)benzyl)-N,N-dimethylethanammonium bromide (DCTBAB) in diluted solutions have been investigated by surface tension, conductimetry and microcalorimetry measurements. The thermodynamic parameters i.e. the critical micelle concentration (cmc), the degree of micelle ionization (alpha), the head group surface area (a 0), Delta H mic, Delta G mic and T Delta S mic are reported at 303 K. The thermodynamic parameters have been compared to those of the conventional surfactant cetyltrimethylammonium bromide (CTAB) in order to specify structural relationships. The obtained results have been discussed considering the hydrophobic behaviour of the S-C=S- linkage and the specific interactions that arise from the introduction of the benzene ring into the hydrophobic part.