Synthesis, thermal and spectral characterization of nanosized Ni(x)Mg(1-x)Al2O4 powders as new ceramic pigments via combustion route using 3-methylpyrozole-5-one as fuel.

New Ni(x)Mg(1-x)Al(2)O(4) nanosized in different composition (0.1≤x≤0.8) powders have been synthesized successively for first time by using low temperature combustion reaction (LTCR) of corresponding metal chlorides, carbonates and nitrates as salts with 3-methylpyrozole-5-one (3MP5O) as fuel at 300°C in open air furnace. Magnesium aluminate spinel (MgAl(2)O(4)) was used as crystalline host network for the synthesis of nickel-based nano ceramic pigments. The structure of prepared samples was characterized by using different techniques such as thermal analysis (TG-DTG/DTA), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). UV/Visible and Diffuse reflectance spectroscopy (DRS) using CIE-L*a*b* parameters methods have been used for color measurements. The obtained results reveal that Ni(x)Mg(1-x)Al(2)O(4) powder of samples is formed in the single crystalline and pure phase with average particle size of 6.35-33.11 nm in the temperature range 500-1200°C. The density, particle size, shape and color are determined for all prepared samples with different calcination time and temperature.

Colorimetric assay of cimetidine in the presence of its oxidative degradates.

Three simple, accurate, and sensitive colorimetric methods for the determination of cimetidine (Cim) in pure form, in dosage forms, and in the presence of its oxidative degradates were developed. These methods are indirect, involve the addition of excess oxidant [N-bromosuccinimide (NBS) for method A; cerric sulfate [Ce(SO4)2] for methods B and C] of known concentration in acid medium to Cim, and the determination of the unreacted oxidant by measurement of the decrease in absorbance of amaranth dye for method A, chromotrope 2R for method B, and rhodamine 6G, for method C at a suitable maximum wavelength, lambda max: 520, 528, and 525 nm, for the 3 methods, respectively. Regression analysis of the Beer plots showed good correlation in the concentration ranges of 0.2-4.4 microg/mL for method A, and 0.2-3.4 microg/mL for methods B and C. The apparent molar absorptivity, Sandell sensitivity, and detection and quantitation limits were evaluated. The stoichiometric ratio between the drug (Cim) and the oxidant (NBS or Ce4+) was estimated. The validity of the proposed methods was tested by analyzing pure and dosage forms containing Cim with relative standard deviation < or = 1.18. The proposed methods could successfully determine the studied drug with varying excess of its oxidative degradation products, with recovery between 99.2 and 101.8, 100.2 and 102.8, and 99.8 and 102.0% for methods A-C, respectively.