Multi-Focal Splenic Tumour in a Belgian Patient and a Brief Review of the Literature on Littoral Cell Angioma.

We describe the case of a 66-year-old woman with littoral cell angioma (LCA) confirmed by histopathology and immunohistochemistry, to our knowledge the first case in Belgium. LCA is an extremely rare primary vascular tumour of the splenic red pulp, probably originating from littoral cells. If a splenic mass and nodules are incidentally identified on imaging and the patient has no associated signs or symptoms, LCA should be suspected. Histopathology and adjacent techniques are mandatory for definitive diagnosis. Splenectomy followed by adequate follow-up is necessary to exclude underlying pathology. LEARNING POINTS: Littoral cell tumour, although a very rare neoplasm, must be included in the differential diagnosis of splenic lesions observed by imaging.As imaging cannot differentiate between benign and malignant lesions, a definitive diagnosis is made only by histopathology and immunohistochemistry.Individuals diagnosed with littoral cell angioma must be carefully evaluated to exclude associated primary, secondary and synchronous malignancies as well as accompanying inflammatory/autoimmune disease.

Do we need 3D tube current modulation information for accurate organ dosimetry in chest CT? Protocols dose comparisons.

OBJECTIVES: To compare the lung and breast dose associated with three chest protocols: standard, organ-based tube current modulation (OBTCM) and fast-speed scanning; and to estimate the error associated with organ dose when modelling the longitudinal (z-) TCM versus the 3D-TCM in Monte Carlo simulations (MC) for these three protocols. METHOD: Five adult and three paediatric cadavers with different BMI were scanned. The CTDIvol of the OBTCM and the fast-speed protocols were matched to the patient-specific CTDIvol of the standard protocol. Lung and breast doses were estimated using MC with both z- and 3D-TCM simulated and compared between protocols. RESULTS: The fast-speed scanning protocol delivered the highest doses. A slight reduction for breast dose (up to 5.1%) was observed for two of the three female cadavers with the OBTCM in comparison to the standard. For both adult and paediatric, the implementation of the z-TCM data only for organ dose estimation resulted in 10.0% accuracy for the standard and fast-speed protocols, while relative dose differences were up to 15.3% for the OBTCM protocol. CONCLUSION: At identical CTDIvol values, the standard protocol delivered the lowest overall doses. Only for the OBTCM protocol is the 3D-TCM needed if an accurate (<10.0%) organ dosimetry is desired. KEY POINTS: • The z-TCM information is sufficient for accurate dosimetry for standard protocols. • The z-TCM information is sufficient for accurate dosimetry for fast-speed scanning protocols. • For organ-based TCM schemes, the 3D-TCM information is necessary for accurate dosimetry. • At identical CTDI vol , the fast-speed scanning protocol delivered the highest doses. • Lung dose was higher in XCare than standard protocol at identical CTDI vol .

Medical Findings and Toxicological Analysis in Infant Death by Balloon Gas Asphyxia: A Case Report.

In recent years, the increasing number of asphyxiation cases due to helium inhalation is remarkable. All described cases in the literature where diagnosed as suicide. In this article, however, we describe a triple infant homicide in which helium, as balloon gas, was administered to three young children after sedation causing asphyxiation and death through the medical findings and toxicological analysis. During autopsy, in addition to standard toxicological samples, gas samples from lungs as well as lung tissue itself were directly collected into headspace vials. Besides routine toxicological analysis, which revealed toxic levels of doxylamine, qualitative analysis on gas and lung samples was performed using headspace gas chromatography-mass spectrometry. As carrier gas, the commonly used helium was replaced by nitrogen. In gas samples from lungs of all three children, no helium was found. Nevertheless, lung tissue samples were found positive on helium. Therefore, sedation followed by asphyxia due to helium inhalation can strongly be assumed as the cause of death of all three children.

HemoVision: An automated and virtual approach to bloodstain pattern analysis.

Bloodstain pattern analysis (BPA) is a subspecialty of forensic sciences, dealing with the analysis and interpretation of bloodstain patterns in crime scenes. The aim of BPA is uncovering new information about the actions that took place in a crime scene, potentially leading to a confirmation or refutation of a suspect's statement. A typical goal of BPA is to estimate the flight paths for a set of stains, followed by a directional analysis in order to estimate the area of origin for the stains. The traditional approach, referred to as stringing, consists of attaching a piece of string to each stain, and letting the string represent an approximation of the stain's flight path. Even though stringing has been used extensively, many (practical) downsides exist. We propose an automated and virtual approach, employing fiducial markers and digital images. By automatically reconstructing a single coordinate frame from several images, limited user input is required. Synthetic crime scenes were created and analysed in order to evaluate the approach. Results demonstrate the correct operation and practical advantages, suggesting that the proposed approach may become a valuable asset for practically analysing bloodstain spatter patterns. Accompanying software called HemoVision is currently provided as a demonstrator and will be further developed for practical use in forensic investigations.

Feasibility and validation of virtual autopsy for dental identification using the Interpol dental codes.

Virtual autopsy is a medical imaging technique, using full body computed tomography (CT), allowing for a noninvasive and permanent observation of all body parts. For dental identification clinically and radiologically observed ante-mortem (AM) and post-mortem (PM) oral identifiers are compared. The study aimed to verify if a PM dental charting can be performed on virtual reconstructions of full-body CT's using the Interpol dental codes. A sample of 103 PM full-body CT's was collected from the forensic autopsy files of the Department of Forensic Medicine University Hospitals, KU Leuven, Belgium. For validation purposes, 3 of these bodies underwent a complete dental autopsy, a dental radiological and a full-body CT examination. The bodies were scanned in a Siemens Definition Flash CT Scanner (Siemens Medical Solutions, Germany). The images were examined on 8- and 12-bit screen resolution as three-dimensional (3D) reconstructions and as axial, coronal and sagittal slices. InSpace(®) (Siemens Medical Solutions, Germany) software was used for 3D reconstruction. The dental identifiers were charted on pink PM Interpol forms (F1, F2), using the related dental codes. Optimal dental charting was obtained by combining observations on 3D reconstructions and CT slices. It was not feasible to differentiate between different kinds of dental restoration materials. The 12-bit resolution enabled to collect more detailed evidences, mainly related to positions within a tooth. Oral identifiers, not implemented in the Interpol dental coding were observed. Amongst these, the observed (3D) morphological features of dental and maxillofacial structures are important identifiers. The latter can become particularly more relevant towards the future, not only because of the inherent spatial features, yet also because of the increasing preventive dental treatment, and the decreasing application of dental restorations. In conclusion, PM full-body CT examinations need to be implemented in the PM dental charting protocols and the Interpol dental codes should be adapted accordingly.