Comprehensive characterization of the structure of Zr-based metallic glasses.

Structure of metallic glasses fascinates as the generic amorphous structural template for ubiquitous systems. Its specification necessitates determination of the complete hierarchical structure, starting from short-range-order (SRO) → medium-range-order (MRO) → bulk structure and free volume (FV) distribution. This link has largely remained elusive since previous investigations adopted one-technique-at-a-time approach, focusing on limited aspects of any one domain. Reconstruction of structure from experimental data inversion is non-unique for many of these techniques. As a result, complete and precise structural understanding of glass has not emerged yet. In this work, we demonstrate the first experimental pathway for reconstruction of the integrated structure, for Zr 67 Ni 33 and Zr 52 Ti 6 Al 10 Cu 18 Ni 14 glasses. Our strategy engages diverse (× 7) multi-scale techniques [XAFS, 3D-APT, ABED/NBED, FEM, XRD, PAS, FHREM] on the same glass. This strategy complemented mutual limitations of techniques and corroborated common parameters to generate complete, self-consistent and precise parameters. Further, MRO domain size and inter-void separation were correlated to identify the presence of FV at MRO boundaries. This enabled the first experimental reconstruction of hierarchical subset: SRO → MRO → FV → bulk structure. The first ever image of intermediate region between MRO domains emerged from this link. We clarify that determination of all subsets is not our objective; the essence and novelty of this work lies in directing the pathway towards finite solution, in the most logical and unambiguous way.

Classification of processes for the atomic layer deposition of metals based on mechanistic information from density functional theory calculations.

Reaction cycles for the atomic layer deposition (ALD) of metals are presented, based on the incomplete data that exist about their chemical mechanisms, particularly from density functional theory (DFT) calculations. ALD requires self-limiting adsorption of each precursor, which results from exhaustion of adsorbates from previous ALD pulses and possibly from inactivation of the substrate through adsorption itself. Where the latter reaction does not take place, an "abbreviated cycle" still gives self-limiting ALD, but at a much reduced rate of deposition. Here, for example, ALD growth rates are estimated for abbreviated cycles in H2-based ALD of metals. A wide variety of other processes for the ALD of metals are also outlined and then classified according to which a reagent supplies electrons for reduction of the metal. Detailed results on computing the mechanism of copper ALD by transmetallation are summarized and shown to be consistent with experimental growth rates. Potential routes to the ALD of other transition metals by using complexes of non-innocent diazadienyl ligands as metal sources are also evaluated using DFT.

A computational study on the superionic behaviour of ThO2.

This study reports the density functional theory (DFT) and classical molecular dynamics (MD) study of the lattice dynamical, mechanical and anionic transport behaviours of ThO2 in the superionic state. DFT calculations of phonon frequencies were performed at different levels of approximation as a function of isotropic dilation (ε) in the lattice parameter. With the expansion of the lattice parameter, there is a softening of B1u and Eu phonon modes at the X symmetry point of the Brillouin zone. As a result of the nonlinear decrease at the X point, the B1u and Eu phonon modes cross each other at ε = 0.03, which is associated with a sharp increase in the narrow peak of the phonon density of states, signifying a higher occupation and hence a higher coupling of these modes at high temperatures. The mode crossing also indicates anionic conductivity in the 〈001〉 direction leading to occupation of interstitial sites. Moreover, MD and nudged elastic band calculated diffusion barriers indicate that 〈001〉 is the easy direction for anion migration in the normal and superionic states. With a further increase in the lattice parameter, the B1u mode continues to soften and becomes imaginary at a strain (ε) of 0.036 corresponding to a temperature of 3430 K. The calculated temperature variation of single crystal elastic constants shows that the fluorite phase of ThO2 remains elastically stable up to the superionic regime, though the B1u phonon mode is imaginary in that state. This leads to anionic disorder at elevated temperatures. Tracking of anion positions in the superionic state as a function of time in MD simulations suggests a hopping model in which the oxygen ions migrate from one tetrahedral site to another via octahedral interstitial sites.

S100A7 has an oncogenic role in oral squamous cell carcinoma by activating p38/MAPK and RAB2A signaling pathway.

Oral cancer consists of squamous cell carcinoma within the oral cavity or on the lip. The clinical prognosis of this cancer is mostly poor owing to delayed diagnosis and a lack of appropriate early detection biomarkers to identify the disease. In the current study, we investigated the role of the S100A7 calcium-binding protein in oral squamous cell carcinoma as an activator of the p38/MAPK and RAB2A signaling pathway. The aim of the present study was to determine whether S100A7 and RAB2A have a role in tumor progression and to assess their potential as early detection biomarkers for oral cancer. This study elucidated the functional and molecular mechanisms of S100A7 and RAB2A activity in oral cancer, leading us to conclude that S100A7 is the major contributing factor in the occurrence of oral cancer and promotes local tumor progression by activating the MAPK signaling pathway via the RAB2A pathway. We hypothesize that S100A7 affects cell motility and invasion by regulating the RAB2A-associated MAPK signaling cascades. Also, the downregulation of S100A7 expression by RNA interference-mediated silencing inhibits oral cancer cell growth, migration and invasion.

Tailor-Made Temperature-Sensitive Micelle for Targeted and On-Demand Release of Anticancer Drugs.

The design of nanomedicines from the tuned architecture polymer is a leading object of immense research in recent years. Here, smart thermoresponsive micelles were prepared from novel architecture four-arm star block copolymers, namely, pentaerythritol polycaprolactone-b-poly(N-isopropylacrylamide) and pentaerythritol polycaprolactone-b-poly(N-vinylcaprolactam). The polymers were synthesized and tagged with folic acid (FA) to render them as efficient cancer cell targeting cargos. FA-conjugated block copolymers were self-assembled to a nearly spherical (ranging from 15 to 170 nm) polymeric micelle (FA-PM) with a sufficiently lower range of critical micelle concentration (0.59 × 10(-2) to 1.52 × 10(-2) mg/mL) suitable for performing as an efficient drug carrier. The blocks show lower critical solution temperature (LCST) ranging from 30 to 39 °C with high DOX-loading content (24.3%, w/w) as compared to that reported for a linear polymer in the contemporary literature. The temperature-induced reduction in size (57%) of the FA-PM enables a high rate of DOX release (78.57% after 24 h) at a temperature above LCST. The DOX release rate has also been tuned by on-demand administration of temperature. The in vitro biocompatibilities of the blank and DOX-loaded FA-PMs have been studied by the MTT assay. The cellular uptake study proves selective internalization of the FA-PM into cancerous cells (C6 glioma) compared that into normal cells (HaCaT). In vivo administration of the DOX-loaded FA-PMs into the C6 glioma rat tumor model resulted in significant accumulation in tumor sites, which drastically inhibited the tumor volume by ∼83.9% with respect to control without any significant systemic toxicity.

Diacerein-mediated inhibition of IL-6/IL-6R signaling induces apoptotic effects on breast cancer.

Interleukin-6 (IL-6) signaling network has been implicated in oncogenic transformations making it attractive target for the discovery of novel cancer therapeutics. In this study, potent antiproliferative and apoptotic effect of diacerein were observed against breast cancer. In vitro apoptosis was induced by this drug in breast cancer cells as verified by increased sub-G1 population, LIVE/DEAD assay, cell cytotoxicity and presence of terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL)-positive cells, as well as downregulation of antiapoptotic proteins Bcl-2 and Bcl-xL and upregulation of apoptotic protein Bax. In addition, apoptosis induction was found to be caspase dependent. Further molecular investigations indicated that diacerein instigated apoptosis was associated with inhibition of IL-6/IL-6R autocrine signaling axis. Suppression of STAT3, MAPK and Akt pathways were also observed as a consequence of diacerein-mediated upstream inhibition of IL-6/IL-6R. Fluorescence study and western blot analysis revealed cytosolic accumulation of STAT3 in diacerein-treated cells. The docking study showed diacerein/IL-6R interaction that was further validated by competitive binding assay and isothermal titration calorimetry. Most interestingly, it was found that diacerein considerably suppressed tumor growth in MDA-MB-231 xenograft model. The in vivo antitumor effect was correlated with decreased proliferation (Ki-67), increased apoptosis (TUNEL) and inhibition of IL-6/IL-6R-mediated STAT3, MAPK and Akt pathway in tumor remnants. Taken together, diacerein offered a novel blueprint for cancer therapy by hampering IL-6/IL-6R/STAT3/MAPK/Akt network.

Perovskite-Ni composite: a potential route for management of radioactive metallic waste.

Management of nickel - based radioactive metallic wastes is a difficult issue. To arrest the release of hazardous material to the environment it is proposed to develop perovskite coating for the metallic wastes. Polycrystalline BaCe0.8Y0.2O3-δ perovskite with orthorhombic structure has been synthesized by sol-gel route. Crystallographic analyses show, the perovskite belong to orthorhombic Pmcn space group at room temperature, and gets converted to orthorhombic Incn space group at 623K, cubic Pm3m space group (with a=4.434Å) at 1173K and again orthorhombic Pmcn space group at room temperature after cooling. Similar observations have been made from micro-Raman study as well. Microstructural studies of BaCe0.8Y0.2O3-δ-NiO/Ni composites showed absence of any reaction product at the interface. This suggests that both the components (i.e. perovskite and NiO/Ni) of the composite are compatible to each other. Interaction of BaCe0.8Y0.2O3-δ-NiO/Ni composites with simulated barium borosilicate waste glass melt also did not reveal any reaction product at the interfaces. Importantly, uranium from the waste glass melt was found to be partitioned within BaCe0.8Y0.2O3-δ perovskite structure. It is therefore concluded that BaCe0.8Y0.2O3-δ can be considered as a good coating material for management of radioactive Ni based metallic wastes.

Investigation of short-range structural order in Zr69.5Cu12Ni11Al7.5 and Zr41.5Ti41.5Ni17 glasses, using X-ray absorption spectroscopy and ab initio molecular dynamics simulations.

Short-range order has been investigated in Zr69.5Cu12Ni11Al7.5 and Zr41.5Ti41.5Ni17 metallic glasses using X-ray absorption spectroscopy and ab initio molecular dynamics simulations. While both of these alloys are good glass formers, there is a difference in their glass-forming abilities (Zr41.5Ti41.5Ni17 > Zr69.5Cu12Ni11Al7.5). This difference is explained by inciting the relative importance of strong chemical order, icosahedral content, cluster symmetry and configuration diversity.

Poly[(µ3-3,5-di-nitro-benzoato-κ(3) O (1):O (1'):O (3))(µ2-hydroxido-κ(2) O:O)copper(II)].

The title complex, [Cu{µ3-O2CC6H3(NO2)2-3,5}(µ-OH)] n , features zigzag chains in which successive pairs of Cu(II) atoms are connected by OH bridges and bidentate carboxyl-ate ligands, leading to six-membered Cu(O)(OCO)Cu rings. The zigzag chains are connected into a three-dimensional architecture by Cu-O(nitro) bonds. The coordination geometry of the Cu(II) atom is square-pyramidal, with the axial position occupied by the nitro O atom, which forms the longer Cu-O bond. Bifurcated hy-droxy-nitro O-H⋯O hydrogen bonds contribute to the stability of the crystal structure.

Uptake of hazardous radionuclides within layered chalcogenide for environmental protection.

Ensuring environmental protection in and around nuclear facilities is a matter of deep concern. Toward this, layered chalcogenide with CdI2 crystal structure has been prepared. Structural characterizations of layered chalcogenide suggest 'topotactic ionic substitution' as the dominant mechanism behind uptake of different cations within its lattice structure. An equilibration time of 45 min and volume to mass ratio of 30:1 are found to absorb (233)U, (239)Pu, (106)Ru, (85+89)Sr, (137)Cs and (241)Am radionuclides to the maximum extents.

Methane from benzene in argon dielectric barrier discharge.

A first-time account of direct, on-line, instantaneous and efficient chemical conversion of gas phase benzene to methane in argon Dielectric Barrier Discharge (DBD) is presented. In the absence of another overt hydrogen-donating source, potency of analogous parents toward methane generation is found to follow the order: benzene>toluene>p-xylene. Simultaneous production of trace amounts of phenolic surface deposits suggest (a) prompt decomposition of the parent molecules, including a large fraction yielding atomic transients (H-atom), (b) continuous and appropriate recombination of such parts, and (c) trace moisture in parent contributing OH radicals and additional H-atoms, which suitably react with the unreacted fraction of the parent, and also other intermediates. Results highlight Ar DBD to be a simple and exploitable technology for transforming undesirable hazardous aromatics to usable/useful low molecular weight open-chain products following the principles of green chemistry and engineering.

Septum bleed during GC-MS analysis: utility of septa of various makes.

The significant presence of septum-related ghost peaks, causing interference in routine gas chromatography-mass spectrometry analyses at sample injection port temperatures above 100°C, is demonstrated. A comparative study with commonly employed septa of various types and makes under varying analytical conditions, e.g., injection port temperature, carrier flow rate, capillary column type and oven heating rate reveal that long-chain hydrocarbons, substituted phthalate derivatives and silanes (silicon compounds) are responsible for such interferences, which is confirmed from their respective peak fragmentation patterns after comparison with standard mass spectrometry library data. Consequently, prior blank studies at actual analysis conditions may become mandatory for quantification and reduction of such interferences, ignoring septa quality and performance claims.

Mechanism of trivalent gold reduction and reactivity of transient divalent and monovalent gold ions studied by gamma and pulse radiolysis.

The detailed kinetics of the multistep mechanism of the Au(III) ion reduction into gold clusters have been investigated by radiation chemistry methods in 2-propanol. In particular, a discussion on the steady state radiolysis dose-dependence of the yields concludes to a comproportionation reaction of nascent gold atoms Au(0) with excess Au(III) ions into Au(II) and Au(I). This reaction should be achieved through Au(III) consumption before the coalescence of atoms Au(0) into gold clusters may occur. Then gold clusters catalyze the reduction of Au(I) by 2-propanol. It was also found that a long-lived Au(II) dimer, (Au(II))(2), was transiently formed according to the quantitative analysis of time-resolved absorbance signals obtained by pulse radiolysis. Then the disproportionation of Au(II) is intramolecular in the dimer instead of intermolecular, as usually reported. The yields, reaction rate constants, time-resolved spectra, and molar extinction coefficients are reported for the successive one-electron reduction steps, involving especially the transient species, such as Au(II), (Au(II))(2), and Au(I). The processes are discussed in comparison with other solvents and other metal ions.

Variable products in dielectric-barrier discharge assisted benzene oxidation.

Atmospheric-pressure dielectric-barrier discharge (DBD) assisted control of benzene((g)) oxidation into different classes of products is presented in this study. The gas-phase products were directly analyzed online by GC-FID and GC-MS. In addition, a solid yellowish surface deposit also formed, which was dissolved in 10 mL ethanol after each 10 min DBD cycle for GC analyses. One of the gas-phase products, phenol was also separately collected and estimated by Folin-Ciocalteu's wet-colorimetric method. In the gas phase only phenol and biphenyl were detected at maximum total conversion of approximately 3%, while in the ethanolic solution furthermore 1,2- and 1,4-dihydroxybenzene, 2,2'-biphenol, 2- and 4-phenylphenol and 4-phenoxyphenol were estimated at microM to mM level, and reveal approximately 30% total conversion. Products' types hint at the phenyl radical as the primary precursor. However, with the use of mesoporous molecular sieve 10X packing in unison with DBD, while the concentrations of such phenolic products decreased drastically, a number of open chain and non-aromatic ethers, aldehydes and esters, and also naphthalene and biphenylene were formed. In addition to high DBD process efficiency, the latter results suggest modification of discharge characteristics, and also strong physicochemical effects of cavity size and surface property on the intermediate reactions therein. Thus, use of such packing highlights a novel and practical methodology for control of chemical reactions towards useful product types, vis-à-vis pollutant mitigation.

In situ formation of stable gold nanoparticles in polymer inclusion membranes.

Gold nanoparticles (Au nps) were synthesized in the matrix of a plasticized anion-exchange membrane. The membrane was prepared by solvent casting of the solution containing a liquid anion exchanger trioctylmethylammonium chloride (Aliquat-336), a matrix-forming polymer cellulose triacetate (CTA), and a plasticizer dioctyl phthalate (DOP) dissolved in CH(2)Cl(2). For in situ synthesis of Au nps, the membrane samples were equilibrated with a well-stirred solution containing 0.01 mol L(-1)HAuCl(4). AuCl(4)(-) ions were transferred to membrane matrix as an ion pair with Aliquat-336 by an ion-exchange mechanism. In a second step, AuCl(4)(-) ion-loaded membrane samples were placed in a well-stirred 0.1 mol L(-1) aqueous solution of NaBH(4) for reduction. It was observed that 80% of the anion-exchange sites were readily available for the exchange process after formation of the Au nps. The content of Au nps in the membrane was increased either by increasing the concentration of the Aliquat-336 in membrane or by repeating sequential cycles of loading of AuCl(4)(-) ions followed by reduction with BH(4)(-) in the membrane matrix. TEM images of a cross section of the membrane showed that Au nps were dispersed throughout the matrix of the membrane but excluded from the surface. The size distribution of the nps was found to be dependent on Au content in the membrane. For example, 7- to 16-nm Au nps with average size 10 nm were observed in the membrane after the first cycle of synthesis. On increasing the Au content in the membrane by repeating the cycle of synthesis, the size dispersion of nps broadened from 5 to 20 nm without affecting the average size. The lambda(max) (530 nm) and intensity of the surface plasmon band of Au nps embedded in the matrix of membrane were found to remain unaltered over a testing period of a month in the samples kept in water as well as in air under ambient conditions. This indicated that Au nps were quite stable in the membrane matrix. The experimental information obtained by the radiotracers and energy-dispersive X-ray fluorescence (EDXRF) analyses has been used to understand the process of Au nps formation in the membrane matrix.

Excess enthalpy and luminescence studies of SnO2 nanoparticles.

The extra reactivity of nano materials is attributed to the excess surface energy stored in the sample. The excess enthalpy of SnO2 nano-particles were measured as a function of particle size using a calvet calorimeter. SnO2 with particle size 11, 27, 47 nm and bulk samples (1 microm) were dropped from room temperature to 987, 936 and 885 K and their H(T)-H298 values were determined. The excess enthalpies for SnO2 samples with particle sizes 11, 27 and 47 nm compared to the bulk sample calculated from the difference between H(T)-H298 values of the nano and the bulk samples were found to be 15.06, 3.05, 2.21 kJ x mol(-1) respectively. Luminescence experiments reveal that the surface trap electron density decreases with increase of particle size. The excess enthalpy is related to the surface trap intensity.

Luminescence study on Eu(3+) doped Y(2)O(3) nanoparticles: particle size, concentration and core-shell formation effects.

Nanoparticles of Eu(3+) doped Y(2)O(3) (core) and Eu(3+) doped Y(2)O(3) covered with Y(2)O(3) shell (core-shell) are prepared by urea hydrolysis for 3 h in ethylene glycol medium at a relatively low temperature of 140 °C, followed by heating at 500 and 900 °C. Particle sizes determined from x-ray diffraction and transmission electron microscopic studies are 11 and 18 nm for 500 and 900 °C heated samples respectively. Based on the luminescence studies of 500 and 900 °C heated samples, it is confirmed that there is no particle size effect on the peak positions of Eu(3+) emission, and optimum luminescence intensity is observed from the nanoparticles with a Eu(3+) concentration of 4-5 at.%. A luminescence study establishes that the Eu(3+) environment in amorphous Y (OH)(3) is different from that in crystalline Y(2)O(3). For a fixed concentration of Eu(3+) doping, there is a reduction in Eu(3+) emission intensity for core-shell nanoparticles compared to that of core nanoparticles, and this has been attributed to the concentration dilution effect. Energy transfer from the host to Eu(3+) increases with increase of crystallinity.

Green synthesis of highly stabilized nanocrystalline silver particles by a non-pathogenic and agriculturally important fungus T. asperellum.

A controlled and up-scalable biosynthetic route to nanocrystalline silver particles with well-defined morphology using cell-free aqueous filtrate of a non-pathogenic and commercially viable biocontrol agent Trichoderma asperellum is being reported for the first time. A transparent solution of the cell-free filtrate of Trichoderma asperellum containing 1 mM AgNO(3) turns progressively dark brown within 5 d of incubation at 25 °C. The kinetics of the reaction was studied using UV-vis spectroscopy. An intense surface plasmon resonance band at ∼410 nm in the UV-vis spectrum clearly reveals the formation of silver nanoparticles. The size of the silver particles using TEM and XRD studies is found to be in the range 13-18 nm. These nanoparticles are found to be highly stable and even after prolonged storage for over 6 months they do not show significant aggregation. A plausible mechanism behind the formation of silver nanoparticles and their stabilization via capping has been investigated using FTIR and surface-enhanced resonance Raman spectroscopy.

Vapor-phase photo-oxidation of methanol over nanosize titanium dioxide clusters dispersed in MCM-41 host material part 1: synthesis and characterization.

Nanosize clusters of titania were dispersed in mesoporous MCM-41 silica matrix with the help of the incipient wet-impregnation route, using an isopropanol solution of titanium isopropoxide as precursor. The clusters thus formed were of pure anatase phase and their size depended upon the titania loading. In the case of low (< 15 wt %) loadings, the TiO2 particles were X-ray and laser-Raman amorphous, confirming very high dispersion. These particles were mostly of < or = 2 nm size. On the other hand, larger size clusters (2-15 nm) were present in a sample with a higher loading of approximately 21 wt %. These particles of titania, irrespective of their size, exhibited an absorbance behavior similar to that of bulk TiO2. Powder X-ray diffraction, N2-adsorption and transmission electron microscopy results showed that while smaller size particles were confined mostly inside the pore system, the larger size particles occupied the external surface of the host matrix. At the same time, the structural integrity of the host was maintained even though some deformation in the pore system was noticed in the case of the sample having highest loading. The core level X-ray photoelectron spectroscopy results revealed a + 4 valence state of Ti in all the samples. A positive binding energy shift and the increase of the width of Ti 2p peaks were observed, however, with the decrease in the particle size of supported titania crystallites, indicative of a microenvironment for surface sites that is different from that of the bulk.

Purification and characterization of maltooligosaccharide-forming amylase from Bacillus circulans GRS 313.

A maltooligosaccharide-forming amylase that hydrolyzes starch into maltotriose and maltopentaose was found in the culture filtrate of a strain of Bacillus circulans GRS 313 isolated from local soil. The enzyme was purified by organic solvent fractionation, Sephadex G-100 gel filtration and CM-Sephadex column chromatography. Optimum pH and temperature of amylase were evaluated using response surface methodology (RSM) and were found to be 48 degrees C and 4.9, respectively. The enzyme was stable up to 60 degrees C and its pH stability was in the range of 5.0-8.0. The Km and Vmax of the amylase with starch were 11.66 mg/ml and 68.97 U, respectively, and the energy of activation, Ea, was 7.52 kcal/mol. Dextrin inhibited the enzyme competitively, with a Ki of 6.1 mg/ml, and glucose caused noncompetitive inhibition with a Ki of 9.5 mg/ml. The enzyme was inhibited by Hg2+, Mn2+, Fe3+ and Cu2+ and enhanced by Co2+ and Mg2+. EDTA reversed the inhibitory effect of the metals. Paper chromatographic and high-performance liquid chromatography analysis of the products of the amylolytic reaction showed the presence of maltotriose, maltotetraose, maltopentaose, maltose and glucose in the starch hydrolysate.