Effect of different atmospheric and subatmospheric cooking techniques on physical and chemical qualitative properties of pork loin.

In this paper, the effects of four cooking procedures were evaluated, two occurring in atmospheric (in ventilated and steam oven) and two in subatmospheric (vacuum and sous vide cooking) conditions on pork Longissimus lumborum. The main objective of the study was to compare and evaluate the physical and chemical characteristics. Samples were cooked in four independent trials namely Oven (O), Steaming (ST), Vacuum Cooking (VC) and Sous Vide (SV). The analyses included temperature, cooking effect, percentage weight loss, texture (cutting and double compression tests), colour (superficially and inside the sample), microstructure (optical microscopy) and fibres shortening analysis. To assess cooking effects on significant nutritional constituents, the fatty acid composition and the content of B vitamins were analysed. Volatile profiles of samples were also compared using solid-phase microextraction. SV cooking resulted in the less favourable meat texture, presenting the highest hardness and chewiness. Moreover, high hardness values measured on SV samples is also related to the high weight loss. The technique of oven cooking (O) demonstrated superior results in terms of mechanical properties, which are closely associated with the cooking values. Specifically, the cook value C0 was significantly higher in the case of oven cooking compared to SV, VC, and ST. Mild temperature conditions and cooking times of the four considered cooking techniques did not induce significant variations in the fatty acid composition and volatile profile. Conversely, SV and VC allowed the highest amount of vitamin B retention in cooked meat. This work suggests that some differences emerged on the effects due to sub-atmospheric and atmospheric cooking compared to traditional ones.

Understanding the Impact of High-Pressure Treatment on Physico-Chemical, Microstructural, and Microbiological Aspects of Pumpkin Cubes.

In this study color, texture, starch-pectin, total antioxidant capacity, microbial count, and microstructure of HPP-treated Violina pumpkin cubes were evaluated. Samples were treated at six different pressures (100 to 600 MPa-HPP100 to HPP600) for 3 min. Moisture, total soluble solids, and pH showed no significant differences between untreated (UNTR) and treated samples. Pumpkin tissue showed great structural modifications as changes in cell size and shape, cell wall damage, increased cell wall thickness, cell detachment and dehydration, and calcium ions deposition mainly from HPP300 to 600. UNTR samples showed the highest value of maximum and minimum cell elongation, perimeter segment, and a more regular cell wall thickness whereas HPP600 showed the lowest values for all these parameters. A noticeable difference was observed in HPP600 samples, with a difference in terms of color (ΔE 11.3 ± 1.9) and hardness (87.4 ± 27.8 N) compared to the UNTR ones (194.9 ± 37.9 N) whereas treatments at other pressures changed less markedly the color and texture. HPP200 could ensure a higher amount of starch and pectin availability while HPP200 and HPP400 showed the highest total antioxidants capacity. High-pressure treatment from HPP400 to 600 gave the highest destruction of microorganisms but negatively influenced the structural quality as well as texture and microstructure.

Semi-Empirical Mathematical Modeling, Energy and Exergy Analysis, and Textural Characteristics of Convectively Dried Plantain Banana Slices.

Thin-layer convective drying of plantain banana was performed at four different temperatures from 50 to 80 °C, with slice thicknesses from 2 to 8 mm. The drying curves, fitted to seven different semi-empirical mathematical models, were successfully used to fit experimental data (R2 0.72−0.99). The diffusion approach had better applicability in envisaging the moisture ratio at any time during the drying process, with the maximum correlation value (R2 0.99) and minimum value of x2 (2.5×10−5 to 1.5×10−4) and RMSE (5.0 ×10−3 to 1.2×10−2). The Deff, hm, and Ea values were calculated on the basis of the experimental data, and overall ranged from 1.11×10−10 to 1.79×10−9 m2 s−1, 3.17×10−8 to 2.20 ×10−7 m s−1 and 13.70 to 18.23 kJ mol−1, respectively. The process energy consumption varied from 23.3 to 121.4 kWh kg−1. The correlation study showed that the drying temperature had a close correlation with hm value and sample hardness. A significant (p < 0.05) increase in hardness of dried plantain banana was observed at 80 °C compared to the other temperatures. Additionally, the sample hardness and process energy consumption were more positively correlated with the thickness of the samples.