Efficient net transfer-dehydrogenation of glycerol: NNN pincer-Mn and manganese chloride as a catalyst unlocks the effortless production of lactic acid and isopropanol.

Herein, a series of pincer-Mn complexes based on bis(imino)pyridine ligands of the type R2NNN (R = tBu, iPr, Cy and Ph) were synthesized and characterized using various spectroscopic techniques. SCXRD studies revealed a trigonal bipyramidal geometry around the metal center in all the complexes. EPR spectroscopy confirmed the presence of high-spin Mn(II) centers with the consistent observation of sextets in EPR spectra. Additionally, solution magnetic moment measurement exhibited values ranging from 5.8 to 6.2 BM for all the complexes, which are in accordance with the theoretical value of 5.92 BM. HRMS analysis complemented structural characterization, showing fragments corresponding to various solvent adducts and derivatives of the complexes. Subsequently, the synthesized complexes were investigated for their catalytic activity in the transfer dehydrogenation of glycerol to lactic acid in the presence of acetone. Among the considered complexes, the catalyst Ph2NNNMnCl2 was found to be highly efficient. Remarkably, a yield of 92% LA was observed with >99% selectivity at 0.5 mol% loading of Ph2NNNMnCl2 in the presence of 1 equivalent of NaOH at 140 °C in 24 h, surpassing the yield obtained from its precursor MnCl2·4H2O, where a yield of 72% LA was observed with 96% selectivity under similar reaction conditions. This catalytic system was further investigated with a range of acceptors, and good to moderate yields were observed in most cases. Moreover, several control experiments, including reaction with PPh3, CS2 and Hg, highlighted the major involvement of molecular species in the reaction medium. Deuterium labelling studies indicated the involvement of C-H bond activation in the catalytic cycle but not in the rate-determining step (RDS), with a secondary kinetic isotope effect (KIE) of 1.25.

Production of hydrogen from alcohols via homogeneous catalytic transformations mediated by molecular transition-metal complexes.

Hydrogen obtained from renewable sources such as water and alcohols is regarded as an efficient clean-burning alternative to non-renewable fuels. The use of the so-called bio-H2 regardless of its colour will be a significant step towards achieving global net-zero carbon goals. Challenges still persist however with conventional H2 storage, which include low-storage density and high cost of transportation apart from safety concerns. Global efforts have thus focussed on liquid organic hydrogen carriers (LOHCs), which have shown excellent potential for H2 storage while allowing safer large-scale transformation and easy on-site H2 generation. While water could be considered as the most convenient liquid inorganic hydrogen carrier (LIHC) on a long-term basis, the utilization of alcohols as LOHCs to generate on-demand H2 has tasted instant success. This has helped to draw a road-map of futuristic H2 storage and transportation. The current review brings to the fore the state-of-the-art developments in hydrogen generation from readily available, feed-agnostic bio-alcohols as LOHCs using molecular transition-metal catalysts.

Electrocatalytic Oxidation of Methanol and Ethanol with 3d-Metal Based Anodic Electrocatalysts in Alkaline Media Using Carbon Based Electrode Assembly.

Homogeneous electrocatalytic systems based on readily available, earth-abundant, inexpensive base metals Ni, Co, and Cr have been formulated for the electro-oxidation of alcohols (methanol and ethanol) that constitute a key half-cell component of direct alcohol fuel cells (DAFCs). Notably, excellent results were obtained for both methanol as well as ethanol electro-oxidation while operating with a half-cell assembly based on all-non-noble working and counter electrode systems consisting of glassy carbon and graphite rod, respectively. Using NaOH as the supporting electrolyte, Ni/Co/Cr metal salts and their bis(iminopyridine) complexes have been used as anodic electrocatalysts for the alcohol half-cell reactions, and among them, catalytic systems based on Co outperformed the corresponding systems based on Ni and Cr. The system comprising CoCl2.·6H2O [10 mM] + NaOH [6 M] at room temperature emerged as the best electrocatalyst for both methanol [5 M] electro-oxidation (ca. 522.5 ± 13.5 mA cm-2 at 1.4 V) and ethanol [5 M] electro-oxidation (ca. 209 ± 25 mA cm-2 at 1.34 V). It was observed that regardless of the starting alcohol, the end product is carbon dioxide, all of which gets trapped as sodium carbonate (up to 97% yield), thereby mitigating any possible hazards of greenhouse gas emission. Inferences obtained from FETEM, FESEM, and EDS analysis of both the electrolyte solution and residues deposited on the electrode surface provide evidence for the mostly homogeneous nature of the reaction mixture with the molecular catalyst being the major contributor toward the electrocatalytic activity apart from the minor role played by trace heterogeneous particles. The current cell assembly operating with non-noble working and counter electrodes utilizing a catalytic system based on an earth-abundant, base metal salt/complex that not only results in good half-cell current densities for high-energy power-source DAFCs but also generates high-value sodium carbonate offers an exciting avenue.

Acceptorless or Transfer Dehydrogenation of Glycerol Catalyzed by Base Metal Salt Cobaltous Chloride - Facile Access to Lactic Acid and Hydrogen or Isopropanol.

The dehydrogenation of glycerol to lactic acid (LA) under both acceptorless and transfer dehydrogenation conditions using readily available, inexpensive, environmentally benign and earth-abundant base metal salt CoCl2 is reported here. The CoCl2 (0.5 mol %) catalyzed acceptorless dehydrogenation of glycerol at 160 °C in the presence of 0.75 equiv. of KOH, gave up to 33 % yield of LA in 44 % selectivity apart from hydrogen. Alternatively, with acetone as a sacrificial hydrogen acceptor, the CoCl2 (0.5 mol %) catalyzed dehydrogenation of glycerol at 160 °C in the presence of 1.1 equiv. of NaOt Bu resulted in up to 93 % LA with 96 % selectivity along with another value-added product isopropanol. Labelling studies revealed a modest secondary KIE of 1.68 which points to the involvement of C-H bond activation as a part of the catalytic cycle but not as a part of the rate-determining step. Catalyst poisoning experiments with PPh3 and CS2 are indicative of the homogeneous nature of the reaction mixture involving molecular species that are likely to be in-situ formed octahedral Co(II) as inferred from EPR, HRMS and Evans magnetic moment studies. The net transfer dehydrogenation activity is attributed to exclusive contribution from the alcoholysis step.