Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Nano Lett ; 22(12): 4758-4764, 2022 Jun 22.
Artigo em Inglês | MEDLINE | ID: mdl-35679577

RESUMO

Freestanding oxide membranes constitute an intriguing material platform for new functionalities and allow integration of oxide electronics with technologically important platforms such as silicon. Sambri et al. recently reported a method to fabricate freestanding LaAlO3/SrTiO3 (LAO/STO) membranes by spalling of strained heterostructures. Here, we first develop a scheme for the high-yield fabrication of membrane devices on silicon. Second, we show that the membranes exhibit metallic conductivity and a superconducting phase below ∼200 mK. Using anisotropic magnetotransport we extract the superconducting phase coherence length ξ ≈ 36-80 nm and establish an upper bound on the thickness of the superconducting electron gas d ≈ 17-33 nm, thus confirming its two-dimensional character. Finally, we show that the critical current can be modulated using a silicon-based backgate. The ability to form superconducting nanostructures of LAO/STO membranes, with electronic properties similar to those of the bulk counterpart, opens opportunities for integrating oxide nanoelectronics with silicon-based architectures.

2.
Opt Lett ; 47(2): 230-233, 2022 Jan 15.
Artigo em Inglês | MEDLINE | ID: mdl-35030574

RESUMO

A dielectric mirror with high infrared reflection and high visible transmission, based on an easily fabricated stepped index rugate filter structure, is presented. Its fabrication involves sputtering depositions, using only two targets, to make five different material compositions. The ultra-wide reflection band is tunable in both position and width, adapting the thickness of the layers and eventually introducing chirped layers. When applied to evacuated solar thermal devices, efficiency improvements of up to 30% can be achieved, making this mirror an attractive solution for reducing radiative losses through the cold-side photon recycling mechanism.

3.
Phys Rev Lett ; 125(12): 126401, 2020 Sep 18.
Artigo em Inglês | MEDLINE | ID: mdl-33016714

RESUMO

Despite its simple structure and low degree of electronic correlation, SrTiO_{3} (STO) features collective phenomena linked to charge transport and, ultimately, superconductivity, that are not yet fully explained. Thus, a better insight into the nature of the quasiparticles shaping the electronic and conduction properties of STO is needed. We studied the low-energy excitations of bulk STO and of the LaAlO_{3}/SrTiO_{3} two-dimensional electron gas (2DEG) by Ti L_{3} edge resonant inelastic x-ray scattering. In all samples, we find the hallmark of polarons in the form of intense dd+phonon excitations, and a decrease of the LO3-mode electron-phonon coupling when going from insulating to highly conducting STO single crystals and heterostructures. Both results are attributed to the dynamic screening of the large polaron self-induced polarization, showing that the low-temperature physics of STO and STO-based 2DEGs is dominated by large polaron quasiparticles.

4.
ACS Appl Mater Interfaces ; 9(27): 23099-23106, 2017 Jul 12.
Artigo em Inglês | MEDLINE | ID: mdl-28613812

RESUMO

We report the study of anatase TiO2(001)-oriented thin films grown by pulsed laser deposition on LaAlO3(001). A combination of in situ and ex situ methods has been used to address both the origin of the Ti3+-localized states and their relationship with the structural and electronic properties on the surface and the subsurface. Localized in-gap states are analyzed using resonant X-ray photoelectron spectroscopy and are related to the Ti3+ electronic configuration, homogeneously distributed over the entire film thickness. We find that an increase in the oxygen pressure corresponds to an increase in Ti3+ only in a well-defined range of deposition pressure; outside this range, Ti3+ and the strength of the in-gap states are reduced.

5.
Sci Rep ; 5: 14506, 2015 Sep 28.
Artigo em Inglês | MEDLINE | ID: mdl-26411304

RESUMO

The electronic properties of NdGaO3/SrTiO3, LaGaO3/SrTiO3, and LaAlO3/SrTiO3 interfaces, all showing an insulator-to-metal transition as a function of the overlayer-thickness, are addressed in a comparative study based on x-ray absorption, x-ray photoemission and resonant photoemission spectroscopy. The nature of the charge carriers, their concentration and spatial distribution as well as the interface band alignments and the overall interface band diagrams are studied and quantitatively evaluated. The behavior of the three analyzed heterostructures is found to be remarkably similar. The valence band edge of all the three overlayers aligns to that of bulk SrTiO3. The near-interface SrTiO3 layer is affected, at increasing overlayer thickness, by the building-up of a confining potential. This potential bends both the valence and the conduction band downwards. The latter one crossing the Fermi energy in the proximity of the interface and determines the formation of an interfacial band offset growing as a function of thickness. Quite remarkably, but in agreement with previous reports for LaAlO3/SrTiO3, no electric field is detected inside any of the polar overlayers. The essential phenomenology emerging from our findings is discussed on the base of different alternative scenarios regarding the origin of interface carriers and their interaction with an intense photon beam.

6.
Sci Rep ; 5: 8393, 2015 Feb 11.
Artigo em Inglês | MEDLINE | ID: mdl-25670163

RESUMO

The time-resolved photoconductance of amorphous and crystalline LaAlO3/SrTiO3 interfaces, both hosting an interfacial 2-dimensional electron gas, is investigated under irradiation by variable-wavelengths, visible or ultraviolet photons. Unlike bare SrTiO3 single crystals, showing relatively small photoconductance effects, both kinds of interfaces exhibit an intense and highly persistent photoconductance with extraordinarily long characteristic times. The temporal behaviour of the extra photoinduced conductance persisting after light irradiation shows a complex dependence on interface type (whether amorphous or crystalline), sample history and irradiation wavelength. The experimental results indicate that different mechanisms of photoexcitation are responsible for the photoconductance of crystalline and amorphous LaAlO3/SrTiO3 interfaces under visible light. We propose that the response of crystalline samples is mainly due to the promotion of electrons from the valence bands of both SrTiO3 and LaAlO3. This second channel is less relevant in amorphous LaAlO3/SrTiO3, where the higher density of point defects plays instead a major role.

7.
Opt Express ; 20(23): 26056-61, 2012 Nov 05.
Artigo em Inglês | MEDLINE | ID: mdl-23187421

RESUMO

We studied the waveguiding properties of a photonic quasicrystal based on an octagonal tiling. The structure exhibits intrinsic localisation in the band gap region, that can be exploited to manipulate the signal transmission through a linear defect. The electromagnetic characteristics are first numerically analysed using a full wave simulation and then experimentally verified by measurements carried out in the X-band microwave region. Possible photonic applications include tunable notch filters having large attenuation.

8.
Opt Express ; 18(26): 26769-74, 2010 Dec 20.
Artigo em Inglês | MEDLINE | ID: mdl-21196953

RESUMO

Recent numerical studies have demonstrated the possibility of achieving substantial enhancements in the transmission of transverse-electric-polarized electromagnetic fields through subwavelength slits in a thin metallic screen by placing single or paired metallic cut-wire arrays at a close distance from the screen. In this paper, we report on the first experimental evidence of such extraordinary transmission phenomena, via microwave (X/Ku-band) measurements on printed-circuit-board prototypes. Experimental results agree very well with full-wave numerical predictions, and indicate an intrinsic robustness of the enhanced transmission phenomena with respect to fabrication tolerances and experimental imperfections.


Assuntos
Campos Eletromagnéticos , Metais , Refratometria/instrumentação , Simulação por Computador , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Modelos Teóricos , Espalhamento de Radiação
9.
Opt Express ; 17(22): 19848-56, 2009 Oct 26.
Artigo em Inglês | MEDLINE | ID: mdl-19997206

RESUMO

We present the experimental observation of the superlensing effect in a slab of a one-dimensional photonic crystal made of tilted dielectric elements. We show that this flat lens can achieve subwavelength resolution in different frequency bands. We also demonstrate that the introduction of a proper corrugation on the lens surface can dramatically improve both the transmission and the resolution of the imaged signal.


Assuntos
Lentes , Refratometria/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Fótons , Reprodutibilidade dos Testes , Espalhamento de Radiação , Sensibilidade e Especificidade
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...