Microencapsulation of hop bioactive compounds by spray drying: Role of inlet temperature and wall material.

This study explores the effect of spray-drying (SD) inlet temperatures (Tinlet 120 and 150 °C) and wall material on the chemical and physico-chemical properties of microencapsulated hop extracts (MHE). Hop extract was formulated with maltodextrin (MD) and gum Arabic (GA) used in single or in combination with ß-cyclodextrin (ßCD). MHE were evaluated for physical properties, bitter acids (BA), total polyphenol content (TPC) and encapsulation efficiency (TPC EE), and antioxidant capacity (AOC). Powders produced at Tinlet 150 °C exhibited the highest flowability and generally higher TPC yield. Besides Tinlet, MD enabled the obtaining of MHE with the highest encapsulation efficiency. Other physico-chemical and antioxidant properties differently varied depending on the Tinlet. Overall, the ßCD addition positively affected α-acids, and ß-acids of MHE obtained at Tinlet 120 °C. ATR-FTIR analysis showed hydrogen bond formation between hop compounds and ßCD. Multifactorial ANOVA highlighted that Tinlet, W, and their interaction influenced almost all the chemical and physico-chemical properties of MHE.

High pressure homogenization to boost the technological functionality of native pea proteins.

Pea proteins are being increasingly used for the formulation of plant-based products, but their globular structure and the presence of aggregates can affect their technological properties. In this study, the effect of high pressure homogenization (HPH) at different intensities (60 and 100 MPa) was investigated as a pre-treatment to modulate the techno-functional properties of a pea protein isolate (IP) extracted through an alkaline extraction/isoelectric precipitation process. SDS-PAGE, circular dichroism, thermal properties, total free sulfhydryl groups, antioxidant capacity and reducing properties were evaluated along with technological indices as solubility, WHC and OHC, interfacial tension and emulsifying capacity. HPH treatments were able to unfold and modify proteins structure, leading also to a change of the relative abundance of pea protein globulins (SDS-PAGE) and of the vicilin to legumin ratio. Solubility, WHC and OHC were improved, while interfacial tension and emulsifying capacity were weakly affected. However, an enhanced physical stability over time of the emulsions prepared with the 60 MPa-treated protein was found, likely as an effect of the decreased ratio between vicilin and legumin after treatment. Results of this study will contribute to deepen the effect of the HPH technology used as pre-treatment, adding useful results and expanding knowledge about the structure and techno-functional properties of native and modified pea proteins.

Freeze-Drying Microencapsulation of Hop Extract: Effect of Carrier Composition on Physical, Techno-Functional, and Stability Properties.

In this study, freeze-drying microencapsulation was proposed as a technology for the production of powdered hop extracts with high stability intended as additives/ingredients in innovative formulated food products. The effects of different carriers (maltodextrin, Arabic gum, and their mixture in 1:1 w/w ratio) on the physical and techno-functional properties, bitter acids content, yield and polyphenols encapsulation efficiency of the powders were assessed. Additionally, the powders' stability was evaluated for 35 days at different temperatures and compared with that of non-encapsulated extract. Coating materials influenced the moisture content, water activity, colour, flowability, microstructure, and water sorption behaviour of the microencapsulates, but not their solubility. Among the different carriers, maltodextrin showed the lowest polyphenol load yield and bitter acid content after processing but the highest encapsulation efficiency and protection of hop extracts' antioxidant compounds during storage. Irrespective of the encapsulating agent, microencapsulation did not hinder the loss of bitter acids during storage. The results of this study demonstrate the feasibility of freeze-drying encapsulation in the development of functional ingredients, offering new perspectives for hop applications in the food and non-food sectors.

Effect of heat treatment on phenolic composition and radical scavenging activity of olive leaf extract at different pH conditions: a spectroscopic and kinetic study.

BACKGROUND: The present study focused on the effect of isothermal treatment (5-90 °C) and pH (2.0-6.0) of aqueous olive leaf phenolic extract solutions on the kinetics of degradation of single and total phenolic compounds and radical scavenging activity, with the objective of predicting and optimizing the thermal treatments in foods enriched with olive leaf extracts. RESULTS: The major compound, oleuropein, showed higher degradation at low pH 2.0 and temperature-dependent reaction rates, which fitted well a first-order kinetic model, with an estimated activation energy of 98.03 ± 0.08 kJ mol-1 . Oleuropein hydrolysis resulted in a zero-order increase in hydroxytyrosol concentration at same pH (Ea  = 71.59 ± 1.5 kJ mol-1 ), whereas a 100-fold slower degradation rate was observed at higher pH. Verbascoside was only degraded at pH 6.0, also following first-order kinetics. These changes in oleuropein and hydroxytyrosol concentrations led to significant changes in fluorescence maximum intensities centered around 315 and 360 nm and in the 425-500 nm spectral zone for samples at pH 6.0, which could be associated with verbacoside degradation. Conversely, analysis of total phenolic content and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity showed little changes, indicating a rather constant overall reducing capacity of the resulting pool of compounds after thermal treatments. CONCLUSION: The present study can contribute to the knowledge related to oleuropein and phenolic fraction degradation as a result of matrix (pH) and processing. The kinetic parameters obtained could be applied for predicting and optimizing the thermal treatments in foods and drinks enriched with olive leaf extracts. © 2022 Society of Chemical Industry.

Unravelling the role of sodium chloride and hydroxytyrosol on the colloidal properties and oxidative stability of olive oil-based o/w emulsions: A multivariate statistical approach.

The individual and combined effect of sodium chloride and hydroxytyrosol on the colloidal properties and the chemical and physical stability of olive oil-in-water emulsions was explored by multivariate statistical analysis. Sodium chloride affected the dispersion degree of the emulsions causing an increase of droplet size and inducing flocculation phenomena; however, during storage, the presence of hydroxytyrosol, when added in combination with 2% and 5% of NaCl, retarded samples physical destabilization. A protective effect of salt on lipid hydroperoxides, over storage, was highlighted, mainly at the highest concentrations used. The analysis of volatile organic compounds allowed to identify different oxidation patterns as a consequence of NaCl addition and hydroxytyrosol; moreover, by applying a multivariate statistical approach, it was possible to highlight a positive effect of both NaCl and hydroxytyrosol over the reduction of some oxidation volatiles.

Alginate-based microparticles structured with different biopolymers and enriched with a phenolic-rich olive leaves extract: A physico-chemical characterization.

Encapsulation of olive leaves extracts (OLE), rich of healthy components like Oleuropein, Hydroxytyrosol and Verbascoside, represents a new challenge to improve stability and nutritional value of food as well as a way to recover value added compounds from by-products, contributing to a more sustainable food system. In this context, OLE-loaded microbeads of Na alginate alone or in combination with Pectin, Na Caseinate or Whey protein isolates, were produced by emulsification internal ionotropic gelation. Encapsulation efficiency of the main phenolic compounds (Oleuropein, Hydroxytyrosol, Verbascoside) was carried out along with microparticles morphological characterization by scanning electron microscopy (SEM), thermal properties by differential scanning calorimetry (DSC) and color. Encapsulation efficiency resulted higher for Alginate/Pectin, whilst Alginate/Caseinate was the less performing system, probably due to the lower interaction with polyphenols. SEM revealed collapsed structures and continuous smooth surfaces for Alginate and Alginate/Pectin microbeads while more regular structures and porous surfaces were observed for Alginate/Caseinate and Alginate/Whey proteins. Higher hue angle and lower chroma values were observed for all the beads with respect to the pure extract, indicating a reduction of the yellow/brown color. DSC highlighted higher thermal stability for the microbeads in comparison to the original ingredients, showing also new thermal transitions related to bonds formation between polymers and OLE.

Characterization of Coffee Silver Skin as Potential Food-Safe Ingredient.

By-products from the coffee industry are produced in large amounts each year. Among other wastes, coffee silver skin (CSS) is highly available and more stable due to its lower content of water. This research aimed to characterize coffee silver skin composition and evidence its potentiality for use as a food-safe ingredient in new formulations. Results showed an average total dietary fiber content of 50% but with a higher ratio for insoluble than soluble fiber. A high content of total phenolic compounds, chlorogenic acid, caffeine, and caffeic acid was found and correlated with the high measured antioxidant capacity. Moreover, minerals (e.g., calcium, magnesium, phosphorous, potassium, copper, iron, manganese) important for human wellbeing were found at a high level in CSS, while toxic minerals (e.g., nickel) were found at low levels. In conclusion, coffee silver skin could have an advantageous role for the recovery of valuable compounds and as a potential food-safe ingredient.

Bioactive Potential of Minor Italian Olive Genotypes from Apulia, Sardinia and Abruzzo.

This research focuses on the exploration, recovery and valorization of some minor Italian olive cultivars, about which little information is currently available. Autochthonous and unexplored germplasm has the potential to face unforeseen changes and thus to improve the sustainability of the whole olive system. A pattern of nine minor genotypes cultivated in three Italian regions has been molecularly fingerprinted with 12 nuclear microsatellites (SSRs), that were able to unequivocally identify all genotypes. Moreover, some of the principal phenolic compounds were determined and quantified in monovarietal oils and the expression levels of related genes were also investigated at different fruit developmental stages. Genotypes differed to the greatest extent in the content of oleacein (3,4-DHPEA-EDA) and total phenols. Thereby, minor local genotypes, characterized by stable production and resilience in a low-input agro-system, can provide a remarkable contribution to the improvement of the Italian olive production chain and can become very profitable from a socio-economic point of view.

Environmental Impact of Food Preparations Enriched with Phenolic Extracts from Olive Oil Mill Waste.

Reducing food waste as well as converting waste products into second-life products are global challenges to promote the circular economy business model. In this context, the aim of this study is to quantify the environmental impact of lab-scale food preparations enriched with phenolic extracts from olive oil mill waste, i.e., wastewater and olive leaves. Technological (oxidation induction time) and nutritional (total phenols content) parameters were considered to assess the environmental performance based on benefits deriving by adding the extracts in vegan mayonnaise, salad dressing, biscuits, and gluten-free breadsticks. Phenolic extraction, encapsulation, and addiction to the four food preparations were analyzed, and the input and output processes were identified in order to apply the life cycle assessment to quantify the potential environmental impact of the system analyzed. Extraction and encapsulation processes characterized by low production yields, energy-intensive and complex operations, and the partial use of chemical reagents have a non-negligible environmental impact contribution on the food preparation, ranging from 0.71% to 73.51%. Considering technological and nutritional aspects, the extraction/encapsulation process contributions tend to cancel out. Impacts could be reduced approaching to a scale-up process.

Physical and Sensory Properties of Mayonnaise Enriched with Encapsulated Olive Leaf Phenolic Extracts.

This work aimed to study the physical, structural, and sensory properties of a traditional full-fat mayonnaise (≈ 80% oil) enriched with an olive leaf phenolic extract, added as either free extract or encapsulated in alginate/pectin microparticles. Physical characterization of the mayonnaise samples was investigated by particle size, viscosity, lubricant properties, and color; a sensory profile was also developed by a quantitative descriptive analysis. The addition of the extract improved the dispersion degree of samples, especially when the olive leaf extract-loaded alginate/pectin microparticles were used. The encapsulated extract affected, in turn, the viscosity and lubricant properties. In particular, both of the enriched samples showed a lower spreadability and a higher salty and bitter perception, leading to a reduced overall acceptability. The results of this study could contribute to understanding the effects of the enrichment of emulsified food systems with olive by-product phenolic extracts, both as free and encapsulated forms, in order to enhance real applications of research outcomes for the design and development of healthy and functional formulated foods.

Effect of Fermentation, Drying and Roasting on Biogenic Amines and Other Biocompounds in Colombian Criollo Cocoa Beans and Shells.

The composition of microbiota and the content and pattern of bioactive compounds (biogenic amines, polyphenols, anthocyanins and flavanols), as well as pH, color, antioxidant and reducing properties were investigated in fermented Criollo cocoa beans and shells. The analyses were conducted after fermentation and drying (T1) and after two thermal roasting processes (T2, 120 °C for 22 min; T3, 135 °C for 15 min). The fermentation and drying practices affected the microbiota of beans and shells, explaining the great variability of biogenic amines (BAs) content. Enterobacteriaceae were counted in a few samples with average values of 103 colony forming units per gram (CFU g-1), mainly in the shell, while Lactobacillus spp. was observed in almost all the samples, with the highest count in the shell with average values of 104 CFU g-1. After T1, the total BAs content was found to be in a range of 4.9÷127.1 mg kg-1DFW; what was remarkable was the presence of cadaverine and histamine, which have not been reported previously in fermented cocoa beans. The total BAs content increased 60% after thermal treatment T2, and of 21% after processing at T3, with a strong correlation (p < 0.05) for histamine (ß = 0.75) and weakly correlated for spermidine (ß = 0.58), spermine (ß = 0.50), cadaverine (ß = 0.47) and serotonine (ß = 0.40). The roasting treatment of T3 caused serotonin degradation (average decrease of 93%) with respect to unroasted samples. However, BAs were detected in a non-alarming concentration (e.g., histamine: n.d ÷ 59.8 mg kg-1DFW; tyramine: n.d. ÷ 26.5 mg kg-1DFW). Change in BAs level was evaluated by principal component analysis. PC1 and PC2 explained 84.9% and 4.5% of data variance, respectively. Antioxidant and reducing properties, polyphenol content and BAs negatively influenced PC1 with both polyphenols and BA increasing during roasting, whereas PC1 was positively influenced by anthocyanins, catechin and epicatechin.

From by-product to food ingredient: evaluation of compositional and technological properties of olive-leaf phenolic extracts.

BACKGROUND: Most olive by-products, like olive leaves, are still undervalued despite their strong potential as a source of healthy and functional components. To exploit their potential use as active ingredients in complex food systems, it is of primary importance the knowledge of their composition and technological functionality which represented the objective of this work. RESULTS: Phenolic extracts from olive leaves, obtained by extraction with pure water (Eth0) and two different water-ethanol solutions (Eth30, Eth70), were characterized for their composition and technological properties such as water- / oil- holding ability, air/water surface activity, and emulsifying capacity at pH 4.5 and 7. Their chemical stability over time, at constant temperature, was also investigated. The technological properties were affected by extraction media and pH. Phenolic extracts displayed significant surface activity, showing dose-dependent behavior. Surface properties were affected by pH and this result was confirmed by the emulsifying capacity. The extracts showed good oil-holding capacity but limited water-binding capacity. Eth70 showed the highest chemical stability, which was confirmed by the rate parameters obtained by modeling data using a Weibull model. CONCLUSION: The results of this study highlight that olive leaves extracts can represent a useful ingredient in acidic lipid-containing foods. © 2019 Society of Chemical Industry.