Three-year outcomes of intracapsular femoral neck fractures fixed with sliding hip screws in adults aged under sixty-five years.

INTRODUCTION: Intracapsular femoral neck fractures remain associated with high rates of post-traumatic femoral head necrosis, non-union, and revision surgery. AIM: Our aim was to identify factors associated with revision surgery in intracapsular femoral neck fractures treated with sliding hip screws (SHS) in adults aged <65 years. PATIENTS AND METHODS: Consecutive admissions were identified retrospectively from the Royal Victoria Hospital, Belfast, which was the largest volume hospital on the National Hip Fracture Database. Of 2201 hip fractures between 1st August 2008 and 31st December 2010, 97 (4%) intracapsular fractures treated with SHS in adults <65 years were followed for a mean of 2.9 years (range 0-6.6). RESULTS: Twenty-one (22%) hips were revised to arthroplasty. Avascular necrosis developed in 28 (29%) femoral heads. Eight (8%) fractures proceeded to non-union. Displaced fractures (p<0.001, Fisher's exact [FE]), posterior comminution (p=0.049, FE), chronic respiratory disease (p=0.006, FE) and residual distraction (p=0.011, χ2) were associated with revision to arthroplasty. Multiple regression found displaced fractures (p=0.006) and chronic respiratory disease (p=0.017) significant; in the latter 4 of 6 were revised (67%), including all four patients with chronic obstructive pulmonary disease (COPD). Eleven (11%) individuals required walking aids before injury, which rose to 34 (35%) at one year (p<0.0001, χ2). Eighty-nine (92%) individuals could walk alone outdoors before injury, but only 76 (78%) at one year (p=0.009, χ2). CONCLUSIONS: Displaced fractures in individuals with chronic respiratory disease should be considered high risk for revision to arthroplasty. Posterior cortex deficiency should be evaluated prior to choice of operation. Fracture biology and revascularisation play a greater role than operation timing. A significant proportion of individuals do not recovery pre-morbid mobility by one year.

Is there any place for the variable angle proximal femoral plate? A case matched cohort study against the Dynamic Hip Screw system.

INTRODUCTION: The Variable angle Martin Plate (MP) is designed to offer patient-specific adaption for the treatment of intertrochanteric hip fractures. Its proposed benefits include optimization of lag screw placement, plate shaft congruence and reduced risk of failure. Often its use has been criticized as representing a poor reduction of the fracture. The purpose of this study was to assess for a poorer quality of reduction, and compare functional outcomes and mortality, using a MP to that of a fixed angle Dynamic Hip Screw (DHS) in a matched cohort of patients. METHODS: A retrospective review of a prospective fracture database system was undertaken between 1st January 2004 to 31st December 2013. MP patients were matched to a cohort of DHS patients. Outcomes measure were a quality of procedure score(QPS), 1-year mortality rates, reoperation rates, and Barthel Index functional outcome. Minimum follow up was 12 months. RESULTS: A total of 77 Martin Plate patients were identified and case matched. The mean pre- and post-op Neck Shaft Angle (NSA) in the MPs was significantly different (132.97±7.78 Vs 126±8.62; p<0.0001). Conversely, the mean pre op DHS NSA and the mean post op NSA was not (p=0.397). Mean Tip-Apex Distance (TAD) was significantly different between groups; MP mean 26.51±9.09mm vs DHS 23.50±8.14mm (p=0.023). The QPS consisted of 4 variables. A significant inverse relationship between QPS and the incidence of construct related complications exists. TAD>25mm, and a change in AP NSA of >5°conveyed the greatest risk of complications. No difference occurred in complications, nor 12-month mortality. CONCLUSIONS: No statistical difference was found in the quality of reduction between MP and DHS in this group of matched patients. QPS demonstrated a significant inverse correlation with implant-related complications. No significant difference was noted in the incidence of complications, Barthel Index functional scores, or 12-month mortality between implants. A rationale exists regarding the use of MPs, particularly in patients with varus NSA. However, planning and adequate reduction are essential regardless of implant choice.

Early surveillance of ceramic-on-metal total hip arthroplasty.

Ceramic-on-metal (CoM) is a relatively new bearing combination for total hip arthroplasty (THA) with few reported outcomes. A total of 287 CoM THAs were carried out in 271 patients (mean age 55.6 years (20 to 77), 150 THAs in female patients, 137 in male) under the care of a single surgeon between October 2007 and October 2009. With the issues surrounding metal-on-metal bearings the decision was taken to review these patients between March and November 2011, at a mean follow-up of 34 months (23 to 45) and to record pain, outcome scores, radiological analysis and blood ion levels. The mean Oxford Hip Score was 19.2 (12 to 53), 254 patients with 268 hips (95%) had mild/very mild/no pain, the mean angle of inclination of the acetabular component was 44.8(o) (28(o) to 63(o)), 82 stems (29%) had evidence of radiolucent lines of > 1 mm in at least one Gruen zone and the median levels of cobalt and chromium ions in the blood were 0.83 µg/L (0.24 µg/L to 27.56 µg/L) and 0.78 µg/L (0.21 µg/L to 8.84 µg/L), respectively. The five-year survival rate is 96.9% (95% confidence interval 94.7% to 99%). Due to the presence of radiolucent lines and the higher than expected levels of metal ions in the blood, we would not recommend the use of CoM THA without further long-term follow-up. We plan to monitor all these patients regularly.

Modifiable factors delaying early discharge following primary joint arthroplasty.

AIMS: Recent NHS reforms have incentivised reduction in length of stay, with the UK department of health expecting health trusts to reduce bed days and ultimately reduce overall costs. The aim of this study was to identify avoidable causes for protracted hospital admission following total hip arthroplasty (THA) or total knee arthroplasty (TKA) within a fast-track unit. METHODS: During a 6-month period, 535 consecutive patients underwent primary THA or TKA under the care of a single surgeon. All patients with a post-operative stay of greater than 72 h were identified, and reasons for delayed discharge were determined. RESULTS: The majority of arthroplasty patients were discharged within 3 days post-operatively. Twenty-one per cent of THA patients and 25 % of TKA patients remained as inpatients for greater than 72 h. For the THA population, this equates to 43 % of bed days used by 21 % of patients, and for the TKA population, 44 % of bed days were used by 25 % of patients. The major factor within both groups for delayed discharge was attributed to inadequate social support. CONCLUSIONS: Delayed discharge can never be totally prevented. This unit aims to develop improvement in social work provision, with a greater focus on pre-admission discharge planning to reduce the number of delayed discharges and ultimately reduce the cost burden of joint replacement surgery. It is not conducive with the ethos of fast-track arthroplasty to only identify social circumstances upon admission.

Using a calliper to restore the centre of the femoral head during total hip replacement.

Restoration of leg length and offset is an important goal in total hip replacement. This paper reports a calliper-based technique to help achieve these goals by restoring the location of the centre of the femoral head. This was validated first by using a co-ordinate measuring machine to see how closely the calliper technique could record and restore the centre of the femoral head when simulating hip replacement on Sawbone femur, and secondly by using CT in patients undergoing hip replacement. Results from the co-ordinate measuring machine showed that the centre of the femoral head was predicted by the calliper to within 4.3 mm for offset (mean 1.6 (95% confidence interval (CI) 0.4 to 2.8)) and 2.4 mm for vertical height (mean -0.6 (95% CI -1.4 to 0.2)). The CT scans showed that offset and vertical height were restored to within 8 mm (mean -1 (95% CI -2.1 to 0.6)) and -14 mm (mean 4 (95% CI 1.8 to 4.3)), respectively. Accurate assessment and restoration of the centre of the femoral head is feasible with a calliper. It is quick, inexpensive, simple to use and can be applied to any design of femoral component.

Dentin dysplasia type II: report of case.

Intrapulpal calcifications, in rare situations, may cause deformities and abnormalities of the roots of the teeth. Dentin Dysplasia Type II is a rare heritable dentin defect, of radiopaque foci resembling free pulp stones. This report describes the clinical and radiographic features of Dentin Dysplasia Type II in a fifteen-year-old girl.

Tonsils and adenoids: why the dilemma?

Enlarged tonsils and adenoids have been implicated in dentofacial development and in the developing facial configuration. The growth pattern and the role of these lymphoid tissues are controversial, as are the benefits to be gained by their surgical removel. The diagnosis of enlarged tonsils and adenoids and of mouth breathing is not based on well-defined criteria.