The effect of RAP content on fatigue damage property of hot reclaimed asphalt mixtures.

The fatigue property of the recycled mixture affects the structural design of recycled pavement. In order to explore the effect of different reclaimed asphalt pavement (RAP) content on the fatigue properties of recycled mixtures, the fatigue properties of recycled mixtures were analyzed through an indoor fatigue test and finite element numerical simulation. Based on the phenomenological method and the dissipated energy theory, the fatigue properties of recycled mixtures with different RAP contents were analyzed and the fatigue damage of the mixtures were also studies under various strain levels. Based on the finite element numerical model of fatigue damage, the stress distribution and internal damage field distribution of trabecular specimens under different temperatures, strain levels and RAP contents were analyzed. The results showed that the anti-fatigue level of the mixture decreased as the RAP content was increased. The relative change rate of dissipated energy for different types of mixtures showed a two-stage change rule with the change of load times, that is, the value is large and decreasing, and the value is small and stable. The correlation between the plateau value (PV) and the fatigue life was established under the double logarithm coordinates, which could better analyze the influence law of the RAP content on the fatigue performance of the recycled mixture. Under different temperatures, strain levels, and RAP contents, the stress at the bottom of trabecular specimen and the overall damage field were mainly generated at the upper part under compressive stress and the bottom under tensile stress, and the damage field distribution area accounted for a small part of the whole specimen. According to the test results and fatigue damage distribution, it is recommended that the content of recycled aggregate in recycled asphalt mixtures be less than 30% to ensure good performance. The research results have important practical significance for the improvement of fatigue performance and engineering application of recycled mixtures.

Study on the Relationship between Nano-Morphology Parameters and Properties of Bitumen during the Ageing Process.

Thermo-oxidative ageing is one of the main factors affecting bitumen performance. At present, the research on bitumen ageing has entered the micro stage. The purpose of this paper was to study the relationship between nano-morphology parameters and properties of bitumen of bitumen during the ageing process. To this end, bitumen with different ageing degrees was prepared in this paper, and Atomic force microscopy samples with different cooling rates were prepared. The relationship between ageing degree of bitumen and nano-morphology parameters was analyzed. A functional relationship model between nano-morphology parameters and properties of bitumen was established. The results show that the percentage of bee-like structure area ( P bee - like ), maximum amplitude ( H max ) and roughness ( R q ) increased with the increase of ageing degree. the percentage of bee-like structure area, the maximum amplitude and the roughness increase with the increase of cooling rate. With the increase of the percentage of bee-like structure area, the maximum amplitude and the roughness, the viscosity of bitumen at 60 °C increases, penetration decreases, and softening point increases. There is a nonlinear relationship between the nano-morphology parameters and properties of bitumen.

The Effect of Direct-to-Plant Styrene-Butadiene-Styrene Block Copolymer Components on Bitumen Modification.

Five types of material, styrene-butadiene-styrene block copolymer (SBS), ethyl-vinyl-acetate (EVA), naphthenic oil, maleic anhydride grafted ethylene-vinyl acetate copolymer (EVA-g-MAH) and butylated hydroxytoluene (BHT) were used as the raw ingredients for manufacturing direct-to-plant SBS in this paper. Thirteen kinds of direct-to-plant SBS with different EVA/SBS and naphthenic oil/SBS were prepared as well as the processes diagrammatic sketch of dispersion and swelling of direct-to-plant SBS modifier in bitumen were discussed. Microscopic images of direct-to-plant SBS modified bitumen with different components were obtained using fluorescence microscopy. The micro-images were analysed and quantified with MATLAB software. The influence of key components on the micro-morphology of direct-to-plant SBS-modified bitumen is discussed, followed with the tests on melting points and the melting indexes of direct-to-plant SBS with different EVA/SBS and naphthenic oil/SBS. The performances test of bitumen and bituminous mixture modified by these direct-to-plant SBS were also conducted. Results show that, with the ratio improvement of EVA/SBS or naphthenic oil/SBS, the number of the pixel dot number of area (SBS) in microscopic images increased. Enlargement of the pixel dot number of centre line elongate and the structure fineness was observed, indicating that the dispersion and swelling effect of the SBS modifier in bitumen had been improved. Meanwhile, the macro index, such as the melting point and melting index of direct-to-plant SBS, was also improved corresponding to the increase of EVA/SBS ratio or naphthenic oil/SBS ratio. With the addition of EVA or naphthene oil content, penetration and ductility of direct-to-plant SBS modified bitumen received gradual enhancement, but the softening point and viscosity were found out to be decreased. The high-temperature and low-temperature performances of direct-to-plant SBS modified bituminous mixture can be effectively improved by adding EVA or naphthenic oil. By meeting the required performances of direct-to-plant SBS, modified bitumen and bituminous mixture, the component of direct-to-plant SBS is recommended as, SBS:EVA:naphthenic oil:EVA-g-MAH:BHT is 1:0.1⁻0.5:0.05⁻0.2:0.03:0.05. For the compatibleness of SBS with different bitumen are different, necessary tests verification is recommended to be carried out prior to usage.