Edible insects: Understanding benzo(a)pyrene toxicokinetics in yellow mealworms for safe and sustainable consumption.

The global interest in edible insects as sustainable protein sources raises concerns about the bioaccumulation of contaminants, including polycyclic aromatic hydrocarbons (PAHs), to problematic levels. Understanding the accumulation dynamics of PAHs in edible insects is highly relevant due to the widespread sources and toxicological profiles; however, the bioaccumulative potential of PAHs in edible insects is unexplored. This study examined the uptake and elimination dynamics of benzo(a)pyrene (B(a)P), a representative and carcinogenic PAH, in yellow mealworm larvae (YMW, Tenebrio molitor). Larvae were exposed to feeding substrate with varying B(a)P concentrations (0.03, 0.3, and 3 mg kg-1), and uptake (21 days in B(a)P-contaminated substrate) and elimination (21 days in B(a)P-free substrate) kinetics were subsequently assessed. The results showed that YMW can eliminate B(a)P, revealing dose-dependent B(a)P bioaccumulation in these insects. Larvae fed on a substrate with 0.03 mg kg-1 accumulated B(a)P over 21 days, presenting values of 0.049 (Standard deviation - 0.011) mg kg-1 and a kinetic-based (BAFkinetic) of 1.93 g substrate g organism-1, exceeding the EU regulatory limits for food. However, with a B(a)P half-life (DT50) of 4.19 days in the larvae, an EU legislation safety criterion was met after a 13-day depuration period in clean substrate. Larvae exposed to substrates with 0.3 and 3 mg kg-1 showed B(a)P accumulation, with BAFkinetic values of 3.27 and 2.09 g substrate g organism-1, respectively, not meeting the current legal standards for food consumption at the end of the exposure to B(a)P. Although the B(a)P half-life values after 35 days were 4.30 and 10.22 days (DT50s), the larvae retained B(a)P levels exceeding permitted food safety limits. These findings highlight a significant oversight in regulating PAHs in animal feed and the need for comprehensive safety evaluations of PAH hazards in edible insects for improved PAH feeding guidelines.

Oaks enhance early life stage longleaf pine growth and density in a subtropical xeric savanna.

The interplay of positive and negative species interactions controls species assembly in communities. Dryland plant communities, such as savannas, are important to global biodiversity and ecosystem functioning. Sandhill oaks in xeric savannas of the southeastern United States can facilitate longleaf pine by enhancing seedling survival, but the effects of oaks on recruitment and growth of longleaf pine have not been examined. We censused, mapped, and monitored nine contiguous hectares of longleaf pine in a xeric savanna to quantify oak-pine facilitation, and to examine other factors impacting recruitment, such as vegetation cover and longleaf pine tree density. We found that newly recruited seedlings and grass stage longleaf pines were more abundant in oak-dominated areas where densities were 230% (newly recruited seedlings) and 360% (grass stage) greater from lowest to highest oak neighborhood densities. Longleaf pine also grew faster under higher oak density. Longleaf pine recruitment was lowest under longleaf pine canopies. Mortality of grass stage and bolt stage longleaf pine was low (~1.0% yr-1) in the census interval without fire. Overall, our findings highlight the complex interactions between pines and oaks-two economically and ecologically important genera globally. Xeric oaks should be incorporated as a management option for conservation and restoration of longleaf pine ecosystems.

Effects of naturally sourced bitumen samples from Alberta oil sands region (Canada) on aquatic benthic invertebrates: A case study with Chironomus riparius.

Athabasca oil sands in Alberta, Canada, are large bitumen deposits and are one of the world's largest petroleum reserves. This research contributes to the growing body of knowledge on the influence of this naturally occurring bitumen on freshwaters. Using laboratory-based exposure studies, we examined the life cycle responses of the aquatic midge Chironomus riparius to both naturally formed solid bitumen incorporated in the sediment and its corresponding aqueous extracts, denominated as elutriates. The 28-day partial life cycle assay involved bitumen samples from two distinct geological origins in the Athabasca River Basin (Clearwater and McMurray formations), comprising both weathered and freshly collected bitumen from a total of 4 different rivers. Our results demonstrate a measurable impact of sediment-embedded bitumen on C. riparius life history traits, namely on their growth and emergence patterns. Furthermore, we observed that bitumen samples from the Ells River (McMurray formation), which were freshly collected from exposed river bank soil deposits, exerted the strongest effects on most studied eco-physiological endpoints. Bitumen extracts from the Steepbank River and Athabasca River in the McMurray Formation and Steepbank River in the Clearwater Formation followed, underscoring the geographical variance in bitumen-induced toxicity. Exposure to elutriates, simulating "weathered" bitumen generally did not induce adverse effects in C. riparius life-cycle endpoints compared to elutriates prepared from freshly eroded bank soils. This emphasizes the importance of considering bitumen sources, their age, and the aquatic receiving environment when assessing potential adverse exposure effects. Our study shows that exposure to freshly eroded soils/sediments can potentially affect benthic invertebrates. More research is needed to understand how hydrological changes affect bitumen sediment exposure and the associated risks to aquatic biota.

Toxicity mechanisms of plastic nanoparticles in three terrestrial species: antioxidant system imbalance and neurotoxicity.

The detrimental impacts of plastic nanoparticles (PNPs) are a worldwide concern, although knowledge is still limited, in particular for soil mesofauna. This study investigates the biochemical impact of 44 nm polystyrene PNPs on three soil models-Enchytraeus crypticus (Oligochaeta), Folsomia candida (Collembola) and Porcellionides pruinosus (Isopoda). Exposure durations of 3, 7 and 14 days (d) were implemented at two concentrations (1.5 and 300 mg kg-1 PNPs). Results revealed PNPs impact on the activities of the glutathione-dependent antioxidative enzyme, glutathione S-transferase (GST) and on the neurotransmitter acetylcholinesterase (AChE) for all three species. Catalase (CAT) played a minor role, primarily evident in F. candida at 300 mg kg-1 PNPs (CAT and GST response after 14 d), with no lipid peroxidation (LPO) increase. Even with the antioxidant defence, P. pruinosus was the most sensitive species for lipid oxidative damage (LPO levels increased after 7 d exposure to 300 mg kg-1 PNPs). Significant AChE inhibitions were measured already after 3 d to both PNP concentrations in F. candida and E. crypticus, respectively. Significant AChE inhibitions were also found in P. pruinosus but later (7 d). Overall, the toxicity mechanisms of PNPs involved antioxidant imbalance, being (mostly) the glutathione-associated metabolism part of that defence system. Neurotoxicity, linked to AChE activities, was evident across all species. Sensitivity to PNPs varied: P. pruinosus > F. candida ≅ E. crypticus. This pioneering study on PNPs toxicity in soil invertebrates underscores its environmental relevance, shedding light on altered biochemical responses, that may compromise ecological roles and soil ecosystem fitness.

Kinetics of inactivation of bacteria responsible for infections in hospitals using UV-LED.

Controlling the microbial load in the environment is crucial to prevent the spread of organisms. The continuous spread of nosocomial infections in hospital facilities and the emergence of the coronavirus (COVID-19) highlighted the importance of disinfection processes in health safety. This work aimed to evaluate the effectiveness of LED-based disinfection lamps on bacteria from the ESKAPEE group and virus phage in vitro inactivation to be applied in hospital environments and health facilities disinfection. This study evaluated the effect of different UV wavelengths (275 nm, 280 nm (UVC), 310 nm (UVB) and 340 nm (UVA)) on the disinfection process of various microbial indicators including E. coli, S. aureus, P. aeruginosa, B. subtilis and Bacteriophage lambda DSM 4499. Exposure time (5 min-30 min), exposure distance (0.25 m and 0.5 m) and surface materials (glass, steel, and polished wood) were evaluated on the disinfection efficiency. Furthermore, the study determined the recovery capacity of each species after UV damage. UVC-LED lamps could inactivate 99.99 % of microbial indicators after 20 min exposures at a 0.5 m distance. The exposure time needed to completely inactivate E. coli, S. aureus, P. aeruginosa, B. subtilis and Bacteriophage lambda DSM 4499 can be decreased by reducing the exposure distance. UVB-LED and UVA-LED lamps were not able to promote a log reduction of 4 and were not effective on B. subtilis or bacteriophage lambda DSM 4499 inactivation. Thus, only UVC-LED lamps were tested on the decontamination of different surface materials, which was successful. P. aeruginosa showed the ability to recover from UV damage, but its inactivation rate remains 99.99 %, and spores from B. subtilis were not completely inactivated. Nevertheless, the inactivation rate of these indicators remained at 99.99 % with 24 h incubation after UVC irradiation. UVC-LED lamps emitting 280 nm were the most indicated to disinfect surfaces from microorganisms usually found in hospital environments.

Responses of soil microbiome to copper-based materials (nano and bulk) for agricultural applications: An indoor-mesocosm experiment.

The foreseen increasing application of copper-based nanomaterials (Cu-NMs), replacing or complementing existing Cu-agrochemicals, may negatively impact the soil microbiome. Thus, we studied the effects on soil microbiome function and composition of nano copper oxide (nCuO) or copper hydroxide NMs in a commercial (Kocide®3000) or a lab-synthetized formulation (nCu(OH)2) or bulk copper hydroxide (Cu(OH)2-B), at the commonly recommended Cu dose of 50 mg(Cu)kg-1 soil. Microbial responses were studied over 28 days in a designed indoor mesocosm. On day-28, in comparison to non-treated soil (CT), all Cu-treatments led to a reduction in dehydrogenase (95% to 68%), arylsulfatase (41% to 27%), and urease (40% to 20%) activity. There was a 32% increase in the utilization of carbon substrates in the nCuO-treatment and an increased abundance of viable bacteria in the nCu(OH)2-treatment (75% of heterotrophic and 69% of P-solubilizing bacteria). The relative abundance of Acidobacteria [Kocide®3000, nCuO, and Cu(OH)2-B treatments] and Flavobacteriia [nCu(OH)2-treatment] was negatively affected by Cu exposure. The abundance of Cu-tolerant bacteria increased in soils treated with Kocide®3000 (Clostridia) and nCu(OH)2 (Gemmatimonadetes). All Cu-treated soils exhibited a reduced abundance of denitrification-related genes (0.05% of nosZ gene). The DTPA-extractable pool of ionic Cu(II) varied among treatments: Cu(OH)2-B > Kocide®3000 âˆ¼ nCuO>nCu(OH)2, which may explain changes on the soil microbiome composition, at the genera and OTU levels. Thus, our study revealed that Cu-materials (nano and bulk) influence the soil microbiome with implications on its ecological role. It highlights the importance of assessing the impact of Cu-materials under dynamic and complex exposure scenarios and emphasizes the need for specific regulatory frameworks for NMs.

A Comprehensive Ecotoxicity Study of Molybdenum Disulfide Nanosheets versus Bulk form in Soil Organisms.

The increasing use of molybdenum disulfide (MoS2) nanoparticles (NPs) raises concerns regarding their accumulation in soil ecosystems, with limited studies on their impact on soil organisms. Study aim: To unravel the effects of MoS2 nanosheets (two-dimensional (2D) MoS2 NPs) and bulk MoS2 (156, 313, 625, 1250, 2500 mg/kg) on Enchytraeus crypticus and Folsomia candida. The organisms' survival and avoidance behavior remained unaffected by both forms, while reproduction and DNA integrity were impacted. For E. crypticus, the individual endpoint reproduction was more sensitive, increasing at lower concentrations of bulk MoS2 and decreasing at higher ones and at 625 mg/kg of 2D MoS2 NPs. For F. candida, the molecular endpoint DNA integrity was more impacted: 2500 mg/kg of bulk MoS2 induced DNA damage after 2 days, with all concentrations inducing damage by day 7. 2D MoS2 NPs induced DNA damage at 156 and 2500 mg/kg after 2 days, and at 1250 and 2500 mg/kg after 7 days. Despite affecting the same endpoints, bulk MoS2 induced more effects than 2D MoS2 NPs. Indeed, 2D MoS2 NPs only inhibited E. crypticus reproduction at 625 mg/kg and induced fewer (F. candida) or no effects (E. crypticus) on DNA integrity. This study highlights the different responses of terrestrial organisms to 2D MoS2 NPs versus bulk MoS2, reinforcing the importance of risk assessment when considering both forms.

Trifluridine/tipiracil (FTD/TPI) and regorafenib in older patients with metastatic colorectal cancer.

Colorectal cancer is a disease of older patients, but few guidelines directly address age in their recommendations. Older patients may present comorbidities that affect the choice of chemotherapy, and care must be taken when choosing the best approach. This narrative review aimed to describe the literature regarding approved oral agents for third-line treatment in older patients with refractory metastatic colorectal cancer, regorafenib, and trifluridine/tipiracil (FTD/TPI).

Effect of material type, torque value, and sterilization on linear displacements of a scan body: An in vitro study.

BACKGROUND: There is limited knowledge on the effect of scan body (SB) material type, torque value, and sterilization on linear displacements of implant SBs. PURPOSE: To evaluate the effect of material type, torque value, and sterilization on linear displacements of SBs during screw tightening by using digital image correlation (DIC) analysis. MATERIALS AND METHODS: One polyetheretherketone (PEEK, Zfx Intraoral Scan Body) and one titanium SB (Ti, MPS Zimmer Scanbody R1410) were tightened with 5 Ncm torque on two implants (Zimmer TSV ⌀4.7 mm) by using a digital torque limiting device. SBs' initial spatial positions relative to the implants were recorded by using 3D DIC technique. Measurements were repeated after initially increasing torque value to 10 Ncm and then to 15 Ncm, and these steps were repeated for a total of 10 PEEK and 10 Ti SBs on both implants (n = 20). All SBs were then sterilized 25 times by using an autoclave (STATIM 5000 S G4) according to manufacturer's recommendations and all measurements were repeated. Linear displacements on three axes were calculated for each SB with increasing torque values (from 5 to 10 Ncm and from 10 to 15 Ncm) before and after sterilization. SB displacements within each torque value-sterilization pair were compared by using Mann-Whitney U test, whereas Wilcoxon signed-rank test was used to compare SB displacements within each material-torque value pair between conditions and within each material-sterilization pair between torque values (α = 0.05). RESULTS: On x-axis, PEEK SBs had higher displacements than Ti SBs (p < 0.001), whereas sterilization (p ≤ 0.028) and 15 Ncm torque application (p ≤ 0.006) led to higher displacements of PEEK SBs. On y-axis, PEEK SBs had higher displacements than Ti SBs with 15 Ncm torque application (p ≤ 0.033). A total of 15 Ncm torque-applied PEEK SBs and 10 Ncm torque-applied Ti SBs had higher displacements after sterilization (p ≤ 0.028). Application of 15 Ncm torque led to higher displacements regardless of the material (p ≤ 0.002). On z-axis, PEEK SBs had higher displacements (p ≤ 0.015), except for 10 Ncm torque-applied sterilized SBs (p = 0.102). With 10 Ncm torque application, sterilization decreased the displacement values of PEEK SBs (p = 0.044). Greater displacements were observed with 10 Ncm torque-applied Ti SBs before sterilization and 15 Ncm torque-applied PEEK SBs after sterilization (p ≤ 0.033). CONCLUSIONS: Axial displacement of SBs was affected by material type, torque value, and sterilization. Ti SBs mostly had lower displacements than PEEK SBs. Application of 15 Ncm torque to tested PEEK SBs should be refrained from and a calibrated tightening tool may enable the application of 10 Ncm or lower torque values for lower displacements. Sterilization generally increased PEEK SB displacements.

Ecotoxicological effects of fluvial eroded bitumen sediments from the Alberta oil sands to model aquatic species.

To fully understand the ecological and cumulative effects of mining activities on the surrounding aquatic systems of the Canadian oil sands region, it is essential to understand the consequences of exposure to bitumen-containing soils/sediment from natural geomorphological processes. Both physical and chemical stress on aquatic biota can potentially result from exposure to natural bitumen, resulting from hillslope erosional processes and slumping of bankside soils into the rivers, affecting both riverbed habitat and water quality. The magnitude and duration of bitumen-containing soil's fluvial soils/erosional input into receiving watersheds depends on the interannual variability in the regional hydroclimatology and related seasonal and extreme flow events. The primary objective of this study was to evaluate the potential ecotoxicological effects associated with erosional input of riverbank bitumen soils using controlled exposures. A series of integrated, laboratory-based ecotoxicological bioassays were conducted using organisms with different ecological and functional traits (Daphnia magna (Cladocera), Physa acuta (Gastropoda), and Aliivibrio fischeri (Bacteria)). All model organisms were exposed to elutriates produced from natural bitumen from four different regional rivers: fresh bitumen from shoreline outcrops at the Steepbank River upper and lower reaches (STB-CF and STB-MF, respectively) and the lower-Ells River (EL-MF) and aged, fluvially processed/weathered bitumen from the shoreline of the Athabasca River (ATB-MF). All tested organisms responded negatively to STB-MF and EL-MF elutriates. Low toxicity was also observed in the STB-CF and ATB-MF samples. These results follow the chemical analysis of the parental material and elutriates, where higher levels of metals, polycyclic aromatic compounds and naphthenic acids were detected in the EL-MF sample. In summary, this study shows that eroded and transported bitumen-containing soils and sediments could be a natural source of contaminant exposure to aquatic biota. This fluvial pathway should be considered when assessing background toxicity and the toxicological and ecological effects of oil sands mining activities.

Dual-porosity micromodels for studying multiphase fluid flow in carbonate rocks.

Carbonate rocks usually present a wide variation in pore size within a sample and may contain macroscopic pores ranging from a few millimeters to microscopic pores smaller than one micrometer. Therefore, studying the fluid flow inside carbonates presents a challenging problem. This study proposes a methodology to create dual-porosity micromodels for studying single and two-phase fluid flow in multiscale, carbonate-like, rocks. For this purpose, a design technique for Rock-on-a-Chip (ROC) devices based on the Voronoi tessellation was extended to take into account bimodal pore size distributions, allowing the creation of a macroporous system made up of larger channels and vugs that can be filled with distinct microporosity types. The porous media thus generated were then employed to fabricate polymer micromodels by applying the soft lithography technique. Experimental and numerical results show that the microporosity can increase or reduce the permeability, depending on whether it is added to the grains and/or to the large channels. Even when the microporous matrix completely filled the large channels, the addition of vugs did not increase the permeability. Regarding two-phase fluid flow, the location of the steady-state fluids after drainage clearly depends on the proportion and spatial distribution of microporosity, as well as its type. For the micromodel with microporous grains, no significant amount of wetting fluid was displaced from the micropores. In contrast, when microporosities fill the large channels, the injected fluid forces the displacement of the wetting liquid from the micropores, although far from effectively. The novel approach presented in this work represents a step forward in the artificial generation of more representative micromodels for studying fluid flow at the pore scale.

The effects of different temperatures in mercury toxicity to the terrestrial isopod Porcellionides pruinosus.

Climate changes and metal contamination are pervasive stressors for soil ecosystems. Mercury (Hg), one of the most toxic metals, has been reported to interact with temperature. However, compared to aquatic biota, little is known about how temperature affects Hg toxicity and bioaccumulation to soil organisms. Here, toxicity and bioaccumulation experiments were replicated at 15 °C, 20 °C, and 25 °C to understand how sub-optimal temperatures affect the toxicokinetics and toxicodynamics of Hg via soil. Genotoxicity and energy reserves were also assessed to disclose potential trade-offs in life-history traits. Results underpin the complexity of temperature-Hg interactions. Survival was determined mainly by toxicokinetics, but toxicodynamics also played a significant role in defining survival probability during early stages. The processes determining survival probability were faster at 25 °C: General Unified Threshold of Survival (GUTS) model identified an earlier/steeper decline in survival, compared to 20 °C or 15 °C, but it also approached the threshold faster. Despite potentiation of Hg genotoxicity, temperature promoted faster detoxification, either increasing toxicokinetics rates or damage repair mechanisms. This metabolism-driven increase in detoxification led to higher depletion of energy reserves and likely triggered stress response pathways. This work emphasized the need for comprehensive experimental approaches that can integrate the multiple processes involved in temperature-metal interactions.

Application of an Ultrasonic Nebulizer Closet in the Disinfection of Textiles and Footwear.

The emergence of the coronavirus disease 2019 (COVID-19) pandemic highlighted the importance of disinfection processes in health safety. Textiles and footwear have been identified as vectors for spreading infections. Therefore, their disinfection can be crucial to controlling pathogens' dissemination. The present work aimed to evaluate the effectiveness of a commercial disinfectant aerosolized by an ultrasonic nebulizer closet as an effective method for disinfecting textiles and footwear. The disinfection was evaluated in three steps: suspension tests; nebulization in a 0.08 m3 closet; nebulization in the upscaled 0.58 m3 closet. The disinfection process of textiles and footwear was followed by the use of bacteriophages, bacterial spores, and bacterial cells. The disinfection in the 0.58 m3 closet was efficient for textiles (4 log reduction) when bacteriophage Lambda, Pseudomonas aeruginosa, and Bacillus subtilis were used. The footwear disinfection was achieved (4 log reduction) in the 0.08 m3 closet for Escherichia coli and Staphylococcus aureus. Disinfection in an ultrasonic nebulization closet has advantages such as being quick, not wetting, being efficient on porous surfaces, and is performed at room temperature. Ultrasonic nebulization disinfection in a closet proves to be useful in clothing and footwear stores to prevent pathogen transmission by the items' widespread handling.

Comparison of full and partial coverage crowns with CAD/CAM leucite reinforced ceramic blocks on fracture resistance and fractographic analysis.

To compare full and partial coverage crowns made with different CAD/CAM leucite reinforced ceramic blocks on fracture resistance and fractographic analysis. Full coverage and partial coverage crowns with finish line at 2 mm and 4 mm above the gingiva for molars made with IPS Empress CAD and Rosetta BM. After fatigue process, the fracture test and fractographic analysis were conducted. Although the fracture resistance of IPS Empress crowns did not show any statistical differences regardless of the design, both the partial coverage crowns fabricated using Rosetta BM showed significantly higher load at break and peak load than the full coverage crown. The crowns made with IPS Empress showed significantly higher fracture resistance than that made with Rosetta BM, regardless of the restorative design. The fracture resistance and fractographic analysis of CAD/CAM leucite reinforced full and partial coverage crowns were influenced by the restorative design of and material type.

Multivariate optimization results in an edible extract from Ilex paraguariensis unexplored residues with a high amount of phenolic compounds.

Ilex paraguariensis A. St. Hil. plants are used for the preparation of food and drinks which are widely consumed worldwide. During the harvest season of these plants, 2-5 ton hec-1 of agricultural residue is generated, which remains underutilized. Therefore, this study aimed to obtain an edible extract with high content of bioactive compounds and antimicrobial properties from the agricultural residue of I. paraguariensis for industrial use in food applications. The extraction conditions were optimized through a multivariate experimental design using ethanol:water. The extracted compounds were characterized by HPLC-ESY-QTOF-MS. In the optimal extraction conditions, 55 compounds were extracted, including 8 compounds that were not previously reported in I. paraguariensis. The method proved to be simple, fast, economical and environmentally friendly, with the use of green solvents. This optimization allowed for the extraction of 15.07 g of phenolic compounds per 100 g of residue. The extract showed high antioxidant activity and the capacity to inhibit Staphylococcus aureus. Results indicate that it is possible to obtain an edible extract with a high content of bioactive compounds, particularly phenolic compounds, from the I. paraguariensis residue, which has high prospects for the valorization of unexplored natural resources.

Susceptibility of Folsomia candida to Agrochemicals after Multigenerational Exposure to Human Pharmaceuticals.

In realistic environmental scenarios, soil organisms can be exposed to a combination of pharmaceuticals and agriproducts or within different time frames. Therefore, it is necessary to increase knowledge on soil organism susceptibility under a complex mixture exposure scenario. The present study aimed to assess the susceptibility of the collembolan Folsomia candida to copper and dimethoate on a pre-exposure for 3 generations to human pharmaceuticals (fluoxetine and carbamazepine). Carryover effects on reproductive output and survival were observed after a multigenerational pre-exposure to carbamazepine or fluoxetine, considerably increasing the sensitivity of collembolans to both copper and dimethoate. This was more evident for collembolans pre-exposed to the highest concentrations of both pharmaceuticals (40 mg/kg soil), as demonstrated by a significant reduction in the number of juveniles and increased mortality. In addition, pre-exposure to carbamazepine and fluoxetine induced varying effects on subsequent exposure to the same chemical. Although pre-exposure to carbamazepine led to a decrease in collembolan reproduction, even when transferred to a clean medium, fluoxetine induced severe effects but only when collembolans were exposed to other contaminants (i.e., not when transferred to clean soil). The present study highlighted the need to consider carryover effects and possible interactions between pharmaceuticals and other contaminants under simultaneous exposure. Environ Toxicol Chem 2022;41:592-600. © 2021 SETAC.

Faunimonas pinastri gen. nov., sp. nov., an endophyte from a pine tree of the family Pleomorphomonadaceae, class Alphaproteobacteria.

Bacterial strain A52C2T was isolated from the endophytic microbial community of a Pinus pinaster tree trunk and characterized. Strain A52C2T stained Gram-negative and formed rod-shaped cells that grew optimally at 30 °C and at pH 6.0-7.0. The G+C content of the DNA was 65.1 mol %. The respiratory quinone was ubiquinone 10, and the major fatty acids were cyclo-C19:0 ω8c and C18:0, representing 70.1 % of the total fatty acids. Phylogenetic analyses based on the 16S rRNA gene sequences placed strain A52C2T in a distinct lineage within the order Hyphomicrobiales, family Pleomorphomonadaceae. The 16S rRNA gene sequence similarities of A52C2T to that of Mongoliimonas terrestris and Oharaeibacter diazotrophicus were 93.15 and 93.2 %, respectively. The draft genome sequence of strain A52C2T comprises 4 196 045 bases with a 195-fold mapped coverage of the genome. The assembled genome consists of 43 contigs of more than 1 000 bp (N50 contig size was 209 720 bp). The genome encodes 4033 putative coding sequences. The phylogenetic, phenotypic and chemotaxonomic data showed that strain A52C2T (=UCCCB 130T=CECT 8949T=LMG 29042T) represents the type of a novel species and genus, for which we propose the name Faunimonas pinastri gen. nov., sp. nov.

A Scientometric Study on Industrial Effluent and Sludge Toxicity.

The growth of industrialization has led to an increase in the production of highly contaminated wastewater. Industrial wastewater contains highly complex compounds varying in characteristics and required to be treated before its discharge into a water medium from various industries. However, the efficiency of the treated wastewater from the toxicity reduction perspective is unclear. In order to overcome this barrier, toxicity assessment of the industrial wastewater before and after treatment is crucial. Thus, in this study, a scientometric analysis has been performed on the toxicity assessment of industrial wastewater and sludges, which have been reported in the literature. Web of Science (WoS) core collection database has been considered the main database to execute this analysis. Via the search of pre-researched keywords, a total number of 1038 documents were collected, which have been published from 1951 to 2020. Via CiteSpace software and WoS analyser, these documents went under analysis regarding some of the scientometry criteria, and the detailed results obtained are provided in this study. The total number of published documents on this topic is relatively low during such a long period of time. In conclusion, the need for more detailed contributions among the scientific and industrial communities has been felt.

Biochar in soil mitigates dimethoate hazard to soil pore water exposed biota.

Soil contamination is a worldwide problem urging for mitigation. Biochar is a carbonaceous material used as soil amendment that can immobilize chemical compounds, potentially turning them unavailable for soil biota. The aim of our study was to evaluate biochar's capacity to immobilize dimethoate in soil and, therefore, decreasing the toxicity to soil organisms. Two biochar application rates (2.5% and 5% w/w) were chosen to assess dimethoate potential immobilization, looking at changes in its toxicity to the collembolan Folsomia candida and the plant Brassica rapa upon soil amendment. Complementarily, chemical analyses were performed on soil pore water. Results showed that biochar may sorb and decrease dimethoate concentrations in soil pore water, influencing dimethoate bioavailability and consequent toxicity. Contrary to dimethoate solo impact on collembolans (LC50 0.69 mg kg-1, EC50 0.46 mg kg-1), their survival rate and offspring production were not affected by dimethoate when biochar was applied, regardless of application rate (LC50 and EC50 > 1.6 mg kg-1). Shoot length, fresh and dry weights of B. rapa were less affected by dimethoate upon biochar addition (EC50 values increase for all endpoints). Our study shows that biochar may contribute to decrease dimethoate bioavailability and toxicity to soil porewater exposed organisms.