Molecular Origin of the Odd-Even Effect of Macroscopic Properties of n-Alkanethiolate Self-Assembled Monolayers: Bulk or Interface?

Elucidating the influence of the monolayer interface versus bulk on the macroscopic properties (e.g., surface hydrophobicity, charge transport, and electron transfer) of organic self-assembled monolayers (SAMs) chemically anchored to metal surfaces is a challenge. This article reports the characterization of prototypical SAMs of n-alkanethiolates on gold (CH3(CH2)nSAu, n = 6-19) at the macroscopic scale by electrochemical impedance spectroscopy and contact angle goniometry, and at the molecular level, by infrared reflection absorption spectroscopy. The SAM capacitance, dielectric constant, and surface hydrophobicity exhibit dependencies on both the length (n) and parity (nodd or neven) of the polymethylene chain. The peak positions of the CH2 stretching modes indicate a progressive increase in the chain conformational order with increasing n between n = 6 and 16. SAMs of nodd have a greater degree of structural gauche defects than SAMs of neven. The peak intensities and positions of the CH3 stretching modes are chain length independent but show an odd-even alternation of the spatial orientation of the terminal CH3. The correlations between the different data trends establish that the chain length dependencies of the dielectric constant and surface hydrophobicity originate from changes in the polymethylene chain conformation (bulk), while the odd-even variation arises primarily from a difference in the chemical composition of the interface related to the terminal group orientation. These findings provide new physical insights into the structure-property relation of SAMs for the design of ultrathin film dielectrics as well as the understanding of stereostructural effects on the electrical characteristics of tunnel junctions.

Micromechanical Redox Actuation by Self-Assembled Monolayers of Ferrocenylalkanethiolates: Evens Push More Than Odds.

Microcantilever transducers can be valuable tools for the investigation of physicochemical processes in organized molecular films. Gold-coated cantilevers are used here to investigate the electrochemomechanics of redox-active self-assembled monolayers (SAMs) of ferrocenylalkanethiolates (Fc(CH2) nS) of different alkyl chain lengths. A significant odd-even effect is observed in the surface stress and cantilever movement generated by the oxidation of the SAM-confined ferrocenes as the number of methylene units n in the SAM backbone is varied. We demonstrate that stronger alkyl chain-chain interactions are at the origin of the larger surface stresses generated by SAMs with an even versus odd n. The findings highlight the impact of subtle structural effects and weak van der Waals interactions on the mechanical actuation produced by redox reactions in self-assembled systems.

Electroactive Self-Assembled Monolayers Detect Micelle Formation.

The interfacial electrochemistry of self-assembled monolayers (SAMs) of ferrocenyldodecanethiolate on gold (FcC12SAu) electrodes is applied to detect the micellization of some common anionic surfactants, sodium n-alkyl sulfates, sodium n-alkyl sulfonates, sodium diamyl sulfosuccinate, and sodium dodecanoate, in aqueous solution by cyclic voltammetry. The apparent formal redox potential (E°'SAM) of the FcC12SAu SAM is used to track changes in the concentration of the unaggregated surfactant anions and determine the critical micelle concentration (cmc). The effect of added salt (NaF) on the sodium alkyl sulfate concentration dependence of E°'SAM is also investigated. Weakly hydrated anions, such as ClO4-, pair with the electrogenerated SAM-bound ferroceniums to neutralize the excess positive charge created at the SAM/electrolyte solution interface and stabilize the oxidized cations. E°'SAM exhibits a Nernstian-type dependence on the anion activity in solution. Aggregation of the surfactant anions into micelles above the cmc causes the free surfactant anion activity to deviate from the molar concentration of added surfactant, resulting in a break in the plot of E°'SAM versus the logarithm of the concentration of anionic surfactant. The concentration at which this deviation occurs is in good agreement with literature or experimentally determined values of the cmc. The effects of Ohmic potential drop, liquid junction potential, and surfactant adsorption behavior on E°'SAM are addressed. Ultimately, the E°'SAM response as a function of the anionic surfactant concentration exhibits the same features reported using potentiometry and surfactant ion-selective electrodes, which provide a direct measure of the free surfactant anion activity, thus making FcC12SAu SAM electrodes useful for the detection of surfactant aggregation and micelle formation.

Redox-Controlled Ion-Pairing Association of Anionic Surfactant to Ferrocene-Terminated Self-Assembled Monolayers.

The redox-induced pairing from aqueous solution of a homologous series of sodium n-alkyl sulfate (NaCnSO4) surfactants of 6, 8, 10, and 12 carbons with gold-tethered self-assembled monolayers (SAMs) of ferrocenyldodecanethiolate (FcC12SAu) is investigated by cyclic voltammetry combined with surface plasmon resonance (SPR) spectroscopy. The adsorbed layer thicknesses and surface coverages are consistent with the formation of a monolayer of CnSO4(-) at the oxidized FcC12SAu SAM/aqueous solution interface. A comparison of the anodic charge density with the SPR data indicates that approximately 60% of the adsorbed surfactant anions are paired with SAM-bound ferroceniums, suggesting an interdigitated layer structure. The ion-pairing capabilities of the longer-chain NaC12SO4, NaC10SO4, and NaC8SO4 relative to the short-chain NaC6SO4 are compared using the relative ion-pair formation constants calculated from the apparent SAM redox potentials and IC50 values obtained from competitive association experiments. A longer alkyl chain increases the overall hydrophobicity of the CnSO4(-) anion, thereby increasing its ability to pair with and stabilize the ferrocenium in the nonpolar environment of the SAM. Binary mixtures of NaC12SO4 and NaC6SO4 of different compositions are used to demonstrate that the differences in ion-pairing abilities can be exploited to selectively pair and adsorb C12SO4(-).

Microcantilevers bend to the pressure of clustered redox centers.

The redox-activated deflection of microcantilevers has attracted interest for nanoactuation and chemical sensing. Microcantilever sensors are devices that transduce (bio)chemical reactions into a quantifiable nanomechanical motion via surface stress changes. Despite promising applications in analytical science, poor signal-to-noise ratios and a limited understanding of the molecular origins of the surface stress changes that cause the observed deflections remain obstacles to cantilever-based sensing becoming an established (bio)detection method, such as surface plasmon resonance and electrochemistry. We use phase-separated, binary self-assembled monolayers (SAMs) of ferrocenyldodecanethiolate and n-undecanethiolate as a model system to study the effect of the steric crowding of the redox centers on the surface stress change and cantilever deflection produced by the electrochemical oxidation of the surface-tethered ferrocene to ferrocenium. We correlate the measured surface stress change to the fraction of the clustered ferrocenyldodecanethiolate phase in the binary SAMs. The pairing of anions with the sterically crowded clustered ferroceniums induces a collective molecular reorientation which drives the cantilever deflection. The results provide fundamental insights into the response mechanism of microcantilever-based actuating and sensing technologies.

Redox-induced ion pairing of anionic surfactants with ferrocene-terminated self-assembled monolayers: Faradaic electrochemistry and surfactant aggregation at the monolayer/liquid interface.

Oxidoreduction of self-assembled monolayers (SAMs) of ferrocenyldodecanethiolate on gold in aqueous solutions of surface-active sodium n-alkyl sulfates (NaCnSO4) of 6, 8, 10, and 12 carbons is investigated by cyclic voltammetry and surface plasmon resonance. The effects of surfactant micellization and alkyl chain length on the redox response of the surface-tethered ferrocenes are examined. The SAM redox electrochemistry is sensitive to the surfactant aggregation state in solution. The nonideal behavior of the sodium alkyl sulfates at concentrations above the critical micelle concentration leads to a non-Nernstian variation of the SAM redox potential with concentration. The presence of micelles in solution results in decreased anodic-to-cathodic peak separations and anodic peak full widths at half-maximum. A longer alkyl chain length results in an increased ability of the alkyl sulfate anion to ion pair with the SAM-bound ferrocenium, resulting in oxidation of the ferrocene at lower potential. A comparison of the SAM redox potential at a fixed surfactant concentration of ideal behavior suggests a 4.5 × 10(4) difference in the ion-pairing abilities of the shorter-chain C6SO4(-) and longer-chain C12SO4(-). One-half of the available SAM-bound ferrocenes are oxidized in the NaCnSO4 electrolyte. Surfactant anions adsorb and assemble onto the SAM surface by specific ion-pairing interactions between the sulfate headgroups and oxidized ferrocenium species, forming an interdigitated monolayer in which the surfactant anions alternate between a heads-down and heads-up orientation with respect to the SAM. The work presented points to applications of ferrocenylalkanethiolate SAMs as anion-selective membranes, probes of micelle formation, and surfaces for the electrochemically switchable assembly of organosulfates.