RESUMO
BACKGROUND: Surface topography can be used for the evaluation of spinal deformities without any radiation. However, so far this technique is limited to posterior trunk measurements due to the use of a single posterior camera. RESEARCH QUESTION: Purpose of this study was to introduce a new multi camera surface topography system and to test its reliability and validity. METHODS: The surface topograph uses a two-camera system for imaging and evaluating the subjects front and back simultaneously. Inter- and intra-rater reliability was tested on 40 human subjects by two observers. For validation human, subjects were scanned by MRI and surface-topography. For additional validation we used a phantom with an anthropomorphic body which was scanned by CT and surface topography. RESULTS: Inter- (0.97-0.99) and intra-rater reliability (0.81-0.98) testing revealed good and excellent results in the detection of the body surface structures and measurement of areas and volumes. CT based validation revealed good correspondence between systems in the imaging and evaluation of the phantom model (0.61-10.52 %). Results on validation of human subjects revealed good to moderate results in the detection and measurements of almost all body surface structures (1.36-13.34 %). Only measurements using jugular notch as a reference showed moderate results in validity (0.62-27.5%) testing. SIGNIFICANCE: We have introduced a novel and innovative surface topography system that allows for simultaneous anterior and posterior trunk measurements. The results of our reliability and validity tests are satisfactory. However, in particular around the jugular notch region further improvements in the surface topography reconstruction are needed.
Assuntos
Diagnóstico por Imagem/instrumentação , Imageamento Tridimensional/instrumentação , Tronco , Adulto , Feminino , Humanos , Imageamento Tridimensional/métodos , Imageamento por Ressonância Magnética , Masculino , Imagens de Fantasmas , Reprodutibilidade dos Testes , Tomografia Computadorizada por Raios X , Adulto JovemRESUMO
BACKGROUND: Aortic stenosis (AS) may lead to diastolic dysfunction and later on heart failure (HF) with preserved left ventricular ejection fraction (HFpEF) via increased afterload and left-ventricular (LV) hypertrophy. Since epicardial adipose tissue (EAT) is a metabolically active fat depot that is adjacent to the myocardium and can influence cardiomyocytes and LV function via secretion of proinflammatory cytokines, we hypothesized that high amounts of EAT, as assessed by computed tomography (CT), may aggravate the development and severity of LV hypertrophy and diastolic dysfunction in the context of AS. METHODS: We studied 50 patients (mean age 71 ± 9 years; 9 women) in this preliminary study with mild or moderate AS and mild to severe LV diastolic dysfunction (LVDD), diagnosed by echocardiography, who underwent non-contrast cardiac CT and echocardiography. EAT parameters were measured on 2nd generation dual source CT. Conventional two-dimensional echocardiography and Tissue Doppler Imaging (TDI) was performed to assess LV function and to derive myocardial straining parameter. All patients had a preserved LV ejection fraction > 50%. Data was analysed using Pearson's correlation. RESULTS: Only weak correlation was found between EAT volume or density and E/é ratio as LVDD marker (r = -.113 p = .433 and r = .260, p = .068 respectively). Also, EAT volume or density were independent from Global Strain Parameters (r = 0.058 p = .688 and r = -0.207 p = .239). E/é ratio was strongly associated with LVDD (r = .761 p≤0.0001) and Strain Parameters were moderately associated with LV Ejection Fraction (r = -.669 p≤0.001 and r = -.454 P≤0.005). CONCLUSIONS: In this preliminary study in patients with AS, the EAT volume and density as assessed by CT correlated only weakly with LVDD, as expressed by the commonly used E/é ratio, and with LV strain function. Hence, measuring EAT volume and density may neither contribute to the prediction nor upon the severity of LVDD, respectively.
Assuntos
Tecido Adiposo/patologia , Estenose da Valva Aórtica/fisiopatologia , Disfunção Ventricular Esquerda/fisiopatologia , Adiposidade/fisiologia , Idoso , Idoso de 80 Anos ou mais , Diástole/fisiologia , Ecocardiografia/métodos , Feminino , Insuficiência Cardíaca/fisiopatologia , Humanos , Hipertrofia Ventricular Esquerda/fisiopatologia , Masculino , Pessoa de Meia-Idade , Pericárdio/metabolismo , Pericárdio/fisiologia , Volume Sistólico/fisiologia , Tomografia Computadorizada por Raios X/métodos , Função Ventricular Esquerda/fisiologiaRESUMO
BACKGROUND: Surface-topography has been used for almost two decades in the radiation-free clinical evaluation of spinal posture. So far, it was limited to the analysis of back surface and spine. In order to better understand, diagnose and treat complex spinal pathologies, it is important to measure the whole torso. RESEARCH QUESTION: Purpose of this study was to introduce and test an application that allows 360° reconstruction and analysis of the patient's torso. METHODS: The application uses the information gathered from eight distinct scans and angles. For validation we used an Alderson phantom as an anthropomorphic body. Defined areas and volumes were measured by CT and surface-topography. Inter- and intra-rater reliability was tested in 35 healthy subjects by two observers. RESULTS: The results revealed good correspondence between systems in the imaging and evaluation of the Alderson model (5.3-0.5%). Inter- (0.9-0.98) and intra-rater reliability (0.8-0.95) testing revealed good and excellent results in the detection of almost all body surface structures and measurement of areas and volumes. Only area and volume measurements using jugular notch as a reference showed partly moderate results in reliability (0.62-0.93) testing. SIGNIFICANCE: We were able to introduce a novel 360° torso scan application using surface topography to reconstruct torso measurements. The results of our study showed its high validity and reliability. In the future, this application needs to be tested in patients with spinal pathologies. In summary, this new application may help to better understand, diagnose and treat patients with pathologies of torso and spine.
Assuntos
Imageamento Tridimensional/métodos , Coluna Vertebral/diagnóstico por imagem , Tronco/diagnóstico por imagem , Feminino , Voluntários Saudáveis , Humanos , Masculino , Modelos Anatômicos , Reprodutibilidade dos Testes , Tomografia Computadorizada por Raios XRESUMO
PURPOSE: The aim was to prove the possibility of creating an exact module of knee cartilage defects using 3D printing. METHODS: Defects were created in cadaver knees. CT-arthrography and 3-Tesla MRI were performed. Based on CTA images a model of the cartilage was created using 3D printing. Defect-sizes in the imaging modalities were compared. RESULTS: Estimated lesion area in 3D model differed approximately 5% comparing to the defect sizes in knees. MRI underestimated the defect on average of 12%, whereas the CTA overestimated the defect about 3%. CONCLUSIONS: We proved the feasibility of creating an accurate module of knee cartilage.