Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Polymers (Basel) ; 16(6)2024 Mar 16.
Artigo em Inglês | MEDLINE | ID: mdl-38543433

RESUMO

Enhancing interfacial interactions in fiber-reinforced polymer composites (FRPCs) is crucial for improving their mechanical properties. This can be achieved through the incorporation of nanomaterials or chemically functional agents into FRPCs. This study reports the tailoring of the fiber-matrix interface in FRPCs using non-functionalized graphene nanoplatelets (GNPs) in combination with a waterborne, highly branched, multi-functional polyurethane dispersion (HBPUD). A unique ultrasonic spray deposition technique was utilized to deposit aqueous mixtures of GNP/HBPUDs onto the surfaces of carbon fiber fabrics, which were used to prepare epoxy-prepreg sheets and corresponding FRPC laminates. The influence of the polyurethane (PU) and GNP content and their ratio at the fiber-matrix interface on the tensile properties of resulting high-performance composites was systematically investigated using stress-strain analysis of the produced FRPC plates and SEM analysis of their fractured surfaces. A synergistic stiffening and toughening effect was observed when as low as 20 to 30 mg of GNPs was deposited per square meter of each side of the carbon fiber fabrics in the presence of the multi-functional PU layer. This resulted in a significant improvement in the tensile strength from 908 to 1022 MPa, while maintaining or slightly improving the initial Young's modulus from approximately 63 to 66 MPa.

2.
ACS Omega ; 8(49): 47173-47186, 2023 Dec 12.
Artigo em Inglês | MEDLINE | ID: mdl-38107921

RESUMO

One-component epoxy resins (OCERs) are proposed to overcome the energy inefficiency and processing difficulties of conventional two-component epoxy resins by employing latent curing agents, specifically thermal latent curing agents (TLCs). Despite recent progress, the need for TLCs with a simple preparation method for different curing agents, epoxy resins, and process conditions remains. Here, tailorable TLCs were prepared by forming complexes between imidazole (Im) and amphiphilic polyoxazoline copolymers with tunable structures and properties by a solvent evaporation method. The obtained TLCs were manually mixed with DGEBA to prepare OCERs. The miscibility of the complexes with DGEBA was studied, considering the functionalities of copolymers. The curing behaviors of TLCs were compared using dynamic Differential Scanning Calorimetry (DSC) studies considering the side chain and composition of the copolymers, copolymer:Im ratio, and concentration of Im in DGEBA. The curing behavior of the promising OCERs was studied by isothermal DSC studies to investigate their stability at different temperatures and curing rate at elevated temperatures revealing the stability of these OCERs.

3.
ACS Omega ; 7(44): 40067-40077, 2022 Nov 08.
Artigo em Inglês | MEDLINE | ID: mdl-36385860

RESUMO

Poly(2-oxazoline)s (POZs) are widely investigated for their applications in various fields due to their unique properties. To exploit and combine different characteristics of the POZ family, 2-oxazoline monomers can be copolymerized to prepare tailor-made copolymers with the desired glass transition temperature (T g), melting temperature (T m), amphiphilicity, and functionality. Here, we report the synthesis and characterization of 2-oxazoline monomers and a range of POZ copolymers produced, thereof. 2-Propyl-2-oxazoline (PrOZ) and 2-pentyl-2-oxazoline (PeOZ) monomers were synthesized by two different methods starting from nitriles or carboxylic acids. A number of POZ copolymers were synthesized by copolymerization of 2-ethyl-2-oxazoline (EOZ) with either one of PrOZ, PeOZ, or 2-phenyl-2-oxazoline (PhOZ) at three different compositions (25:75, 50:50, and 75:25) and three molecular weights (1000, 2000, and 5000 Da). The successful synthesis of the monomers and copolymers was demonstrated through their structural analysis by 1H NMR and FTIR. SEC results confirmed the targeted molar masses of the copolymers and living nature of the polymerization by showing low dispersity values. Thermal properties of the copolymers were studied using DSC and TGA. DSC studies revealed the amorph and random state of the copolymers with obtained T g values for the copolymers in the range of -3 to 84 °C depending on their molecular weight and type of the side chain. While the presence of longer aliphatic side chains resulted in lower T g values, the presence of 2-phenyl substituents on the polymer led to higher T g values. The decomposition temperatures determined by TGA were in the range of 328 to 383 °C depending on the molecular weight, composition, and side chain of the copolymers. It was observed that higher molecular weights led to higher T g values and decomposition temperatures. While copolymers with aliphatic side chains exhibited a single-step decomposition profile, the decomposition of copolymers having aromatic side chains occurred in multiple steps. The variations in the molecular weight, composition, and side chains of the copolymers resulted in a library of tailorable amphiphilic copolymers suitable for multiple applications ranging from biomedical applications to composite manufacturing.

4.
Mov Disord ; 28(12): 1675-82, 2013 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-24014074

RESUMO

Currently available dopaminergic drugs such as levodopa and dopamine (DA) receptor agonists impart considerable improvement in Parkinson's disease (PD) motor symptoms but often lead to significant motor complications including "wearing-off" and dyskinesia. Such complications are believed to stem from the pulsatile nature of dopaminergic stimulation with these agents. Continuous dopaminergic drug delivery using polyoxazoline (POZ) polymer conjugation may improve motor symptoms, while avoiding development of side effects. The purposes of the current study are to characterize the in vitro and in vivo pharmacokinetics of POZ conjugation of a U.S. Food and Drug Administration (FDA)-approved DA agonist, rotigotine, and to evaluate their effects in an established rat model of PD. After determination of release profiles of several POZ-conjugated constructs ("fast": SER-212; "moderate": SER-213; and "slow": SER-214) using in vitro hydrolysis, normal male Sprague-Dawley rats were used for determination of the pharmacokinetic profile of both acute and chronic exposure. Finally, a separate group of rats was rendered hemiparkinsonian using intracranial 6-hydroxydopamine (6-OHDA) infusions, treated acutely with POZ-rotigotine, and assessed for rotational behavior and antiparkinsonian benefit using the cylinder test. POZ-rotigotine formulations SER-213 and SER-214 led to substantial pharmacokinetic improvement compared to unconjugated rotigotine. In addition, SER-214 led to antiparkinsonian effects in DA-lesioned rats that persisted up to 5 days posttreatment. Repeated weekly dose administration of SER-214 to normal rats for up to 12 weeks demonstrated highly reproducible pharmacokinetic profiles. The continuous dopaminergic stimulation profile afforded by SER-214 could represent a significant advance in the treatment of PD, with potential to be a viable, once-per-week therapy for PD patients.


Assuntos
Antiparkinsonianos/uso terapêutico , Agonistas de Dopamina/uso terapêutico , Atividade Motora/efeitos dos fármacos , Transtornos Parkinsonianos/tratamento farmacológico , Tetra-Hidronaftalenos/uso terapêutico , Tiofenos/uso terapêutico , Animais , Antiparkinsonianos/administração & dosagem , Antiparkinsonianos/farmacocinética , Modelos Animais de Doenças , Agonistas de Dopamina/administração & dosagem , Agonistas de Dopamina/farmacocinética , Sistemas de Liberação de Medicamentos , Feminino , Masculino , Ratos , Ratos Sprague-Dawley , Tetra-Hidronaftalenos/administração & dosagem , Tetra-Hidronaftalenos/farmacocinética , Tiofenos/administração & dosagem , Tiofenos/farmacocinética , Resultado do Tratamento
5.
Bioconjug Chem ; 22(5): 976-86, 2011 May 18.
Artigo em Inglês | MEDLINE | ID: mdl-21452890

RESUMO

Polyoxazoline polymers with methyl (PMOZ), ethyl (PEOZ), and propyl (PPOZ) side chains were prepared by the living cationic polymerization method and purified by ion-exchange chromatography. The following properties of polyoxazoline (POZ) were measured: apparent hydrodynamic radius by aqueous size-exclusion chromatography, relative lipophilicity by reverse-phase chromatography, and viscosity by cone-plate viscometry. The PEOZ polymers of different molecular weights were first functionalized and then conjugated to model biomolecules such as bovine serum albumin, catalase, ribonuclease, uricase, and insulin. The conjugates of catalase, uricase, and ribonuclease were tested for in vitro activity using substrate-specific reaction methods. The conjugates of insulin were tested for glucose lowering activity by injection to naïve Sprague-Dawley rats. The conjugates of BSA were injected into New Zealand white rabbits and serum samples were collected periodically and tested for antibodies to BSA. The safety of POZ was also determined by acute and chronic dosing to rats. The results showed that linear polymers of POZ with molecular weights of 1 to 40 kDa can easily be made with polydispersity values below 1.10. Chromatography results showed that PMOZ and PEOZ have a hydrodynamic volume slightly lower than PEG; PEOZ is more lipophilic than PMOZ and PEG; and PEOZ is significantly less viscous than PEG especially at the higher molecular weights. When PEOZ was attached to the enzymes catalase, ribonuclease, and uricase, the in vitro activity of the resultant bioconjugates depended on the extent of protein modification. POZ conjugates of insulin lowered blood glucose levels for a period of 8 h when compared to 2 h for insulin alone. PEOZ, like PEG, was also able to successfully attenuate the immunogenic properties of BSA. The POZ polymers (10 and 20 kDa) are safe when administered intravenously to rats, and the maximum tolerated dose (MTD) was greater than 2 g/kg. Blood counts, serum chemistry, organ weights, and the histopathology of key organs were normal. These results conclude that POZ has the desired drug delivery properties for a new biopolymer.


Assuntos
Sistemas de Liberação de Medicamentos , Poliaminas/farmacocinética , Amidas/síntese química , Amidas/química , Amidas/farmacocinética , Animais , Bovinos , Cromatografia por Troca Iônica , Eritrócitos/química , Eritrócitos/efeitos dos fármacos , Feminino , Insulina/química , Masculino , Camundongos , Modelos Animais , Estrutura Molecular , Poliaminas/síntese química , Poliaminas/química , Proteínas/química , Coelhos , Ratos , Ratos Sprague-Dawley , Distribuição Tecidual
6.
Biomacromolecules ; 6(1): 514-20, 2005.
Artigo em Inglês | MEDLINE | ID: mdl-15638560

RESUMO

A novel methacrylate monomer containing a quinolone moiety was synthesized and homopolymerized in N,N-dimethylformamide (DMF) by using azobisisobutyronitrile (AIBN) as an initiator. The new monomer was copolymerized with poly(ethylene glycol) methyl ether methacrylate (MPEGMA) in DMF using the same initiator. The monomer, homopolymer, and copolymer were characterized by elemental analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), size exclusion chromatography (SEC), FTIR, (13)C NMR, and (1)H NMR. The antibacterial activities of the monomer as well as polymers were investigated against Staphylococcus aureus and Escherichia coli, which are representative of Gram-positive and Gram-negative bacteria, respectively. All compounds showed excellent antibacterial activities against these two types of bacteria. The antibacterial activities were determined using the shaking flask method, where 25 mg/mL concentrations of each compound were tested against 10(5) CFU/mL bacteria solutions. The number of viable bacteria was calculated by using the spread plate method, where 100 microL of the incubated antibacterial agent in bacteria solutions were spread on agar plates and the number of viable bacteria was counted after 24 h of incubation period at 37 degrees C.


Assuntos
Antibacterianos , Norfloxacino/química , Polimetil Metacrilato , Antibacterianos/síntese química , Antibacterianos/química , Antibacterianos/farmacologia , Isótopos de Carbono , Escherichia coli/efeitos dos fármacos , Espectroscopia de Ressonância Magnética , Testes de Sensibilidade Microbiana , Estrutura Molecular , Polimetil Metacrilato/síntese química , Polimetil Metacrilato/química , Polimetil Metacrilato/farmacologia , Staphylococcus aureus/efeitos dos fármacos
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...