Let's Print an Ecology in 3D (and 4D).

The concept of ecology, historically rooted in the economy of nature, currently needs to evolve to encompass the intricate web of interactions among humans and various organisms in the environment, which are influenced by anthropogenic forces. In this review, the definition of ecology has been adapted to address the dynamic interplay of energy, resources, and information shaping both natural and artificial ecosystems. Previously, 3D (and 4D) printing technologies have been presented as potential tools within this ecological framework, promising a new economy for nature. However, despite the considerable scientific discourse surrounding both ecology and 3D printing, there remains a significant gap in research exploring the interplay between these directions. Therefore, a holistic review of incorporating ecological principles into 3D printing practices is presented, emphasizing environmental sustainability, resource efficiency, and innovation. Furthermore, the 'unecological' aspects of 3D printing, disadvantages related to legal aspects, intellectual property, and legislation, as well as societal impacts, are underlined. These presented ideas collectively suggest a roadmap for future research and practice. This review calls for a more comprehensive understanding of the multifaceted impacts of 3D printing and the development of responsible practices aligned with ecological goals.

Eco-Geopolymers: Physico-Mechanical Features, Radiation Absorption Properties, and Mathematical Model.

Waste ashes and radiation are hazardous environmental and health factors; thus, a lot of attention is paid to their reduction. We present eco-geopolymer building materials (GPBMs) based on the class F fly ashes (FFAs) from thermal power plants (TPPs) and their implementation as a barrier against radioactive radiation. Different methods of production, ratios of FFA to alkali activator, and temperatures of curing were tested. Small spherical particles and higher content of SiO2 resulted in developed surface area and higher reactivity of Isken TPP FFA than Catalagzi TPP FFA. Lower activator concentration (10% vs. 20%) and curing temperature (70 vs. 100 °C) caused an increase in GPBM compressive strength; the highest value was measured as 93.3 MPa. The highest RA was measured for GPBMs, provided alkali activator ratio (Na2SiO3/NaOH) was >2 and its concentration was 20%. The mathematical model developed in this study proved FFA quantity, and thus GPBM mechanical properties, as key factors influencing RA. In the light of these results, the lightweight GPBMs can be excellent materials for the construction sector dedicated to immobilization, storage, and disposal for radionuclides or barriers against radiation; however, multiple steps of their production require careful optimization.

Hybrid Materials Based on Fly Ash, Metakaolin, and Cement for 3D Printing.

Nowadays, one very dynamic development of 3D printing technology is required in the construction industry. However, the full implementation of this technology requires the optimization of the entire process, starting from the design of printing ideas, and ending with the development and implementation of new materials. The article presents, for the first time, the development of hybrid materials based on a geopolymer or ordinary Portland cement matrix that can be used for various 3D concrete-printing methods. Raw materials used in the research were defined by particle size distribution, specific surface area, morphology by scanning electron microscopy, X-ray diffraction, thermal analysis, radioactivity tests, X-ray fluorescence, Fourier transform infrared spectroscopy and leaching. The geopolymers, concrete, and hybrid samples were described according to compressive strength, flexural strength, and abrasion resistance. The study also evaluates the influence of the liquid-to-solid ratio on the properties of geopolymers, based on fly ash (FA) and metakaolin (MK). Printing tests of the analyzed mixtures were also carried out and their suitability for various applications related to 3D printing technology was assessed. Geopolymers and hybrids based on a geopolymer matrix with the addition of 5% cement resulted in the final materials behaving similarly to a non-Newtonian fluid. Without additional treatments, this type of material can be successfully used to fill the molds. The hybrid materials based on cement with a 5% addition of geopolymer, based on both FA and MK, enabled precise detail printing.

Process Development of Fly Ash-Based Geopolymer Mortars in View of the Mechanical Characteristics.

This study aimed to determine the effects of design parameters, including the liquid/solid ratio (L/S), Na2SiO3/NaOH weight ratio, and curing temperature, on class F fly ash-based geopolymer composites. For this purpose, two disparate sources of fly ash were supplied from Çatalagzi (FA) and Isken Sugözü (FB) Thermal Power Plants in Turkey. Two different L/S ratios of 0.2 and 0.4 were used. The Na2SiO3/NaOH ratios in the alkaline solutions were 1, 1.5, 2, 2.5, and 3 by weight for each type of geopolymer mixture. Then, 40 different mixes were cured at two specific temperatures (70 °C and 100 °C) for 24 h and then preserved at room temperature until testing. Thereafter, the physical water absorption properties, apparent porosity, and bulk density were examined at 28 days on the hardened mortars. Additionally, compressive and flexural tests were applied to the geopolymers at 7, 28, and 90 days. It was found that the highest compressive strength was 60.1 MPa for the geopolymer manufactured with an L/S of 0.2 and Na2SiO3/NaOH ratio of 2. Moreover, the best thermal curing temperature for obtaining optimal strength characteristics was 100 °C for the FB.

Eco-Friendly Fired Brick Produced from Industrial Ash and Natural Clay: A Study of Waste Reuse.

Bottom ash (BA) is an industrial solid waste formed by the burning of coal. The environmental problems and storage costs caused by this waste increase with every passing day. In this study, the use of BA as an additive (clay substitute) in fired brick production was investigated. The study consisted of two stages. In the first stage, cylinder blocks were produced from clay used in brick production. The second stage was the examination of the experimental substitution of clay with 10, 20, 30 and 40% BA. Samples were fired at 900, 1000, 1100 and 1150 °C to produce fired brick samples. The unit weight, compressive strength (before and after freeze-thawing) and water absorption were analyzed for the samples. The unit weight values decreased in the samples containing BA. The mechanical properties met the conditions prescribed in the relevant standards; i.e., all of the samples fired at 1100 and 1150 °C had a sufficient compressive strength over 20 MPa. The high potential of fired bricks for the construction industry was proved. BA can be used as a clay substitute, while the developed protocol can be used to effectively produce fired bricks.

Process Design for a Production of Sustainable Materials from Post-Production Clay.

Alkali activated cement (AAC) can be manufactured from industrial by-products to achieve goals of "zero-waste" production. We discuss in detail the AAC production process from (waste) post-production clay, which serves as the calcium-rich material. The effect of different parameters on the changes in properties of the final product, including morphology, phase formation, compressive strength, resistance to the high temperature, and long-term curing is presented. The drying and grinding of clay are required, even if both processes are energy-intensive; the reduction of particle size and the increase of specific surface area is crucial. Furthermore, calcination at 750 °C ensure approximately 20% higher compressive strength of final AAC in comparison to calcination performed at 700 °C. It resulted from the different ratio of phases: Calcite, mullite, quartz, gehlenite, and wollastonite in the final AAC. The type of activators (NaOH, NaOH:KOH mixtures, KOH) affected AAC mechanical properties, significantly. Sodium activators enabled obtaining higher values of strength. However, if KOH is required, the supplementation of initial materials with fly ash or metakaolin could improve the mechanical properties and durability of AAC, even c.a. 28%. The presented results confirm the possibility of recycling post-production clay from the Raciszyn II Jurassic limestone deposit.

Metals (Hg, Pb, Cu, and Zn) bioaccumulation in sediment, fish, and human scalp hair: a case study from the city of mersin along the southern coast of Turkey.

This study investigates mercury, lead, copper, and zinc concentrations in six most frequently consumed fish species (120 samples), sediments (20 samples) taken from Karaduvar Fishing Area where fish species live, and Mersin Port as a contrary region, and human scalp hair for people regularly consuming these fish species (50 samples) and non-fish-eaters (15 samples) in Mersin, Turkey. On taking living environment into account, the fish groups include pelagic species of Liza saliens, Liza aurata, and demersal species of Merluccius merluccius, Mullus barbatus, Upeneus moluccensis, and Solea solea. Total Hg (THg) was found to accumulate in muscle tissues at the lowest concentration (0.01 microg/g) in L. saliens and at the highest (2.66 microg/g) in S. solea. Pb was only detected at high concentrations of 1.86 microg/g in M. barbatus and of 2.16 microg/g in M. merluccius. Cu and Zn concentrations were below the detection limit within all fish species. In the sediment samples, Pb and Cu concentrations were persistently below their effect range-median (ERM) value, whereas this limiting value only maintained for 15% of THg concentrations. On the other hand, the effect range-low (ERL) of sediment exceeded at Pb in 15% of samples and Cu in 25% of samples. Zn remained below the detection limit for sediment samples. The metal concentrations at scalp hairs of regular consumers of these fish groups and non-fish eaters vary from the range 0.40-3.28 to 0.14-1.02 microg/g for THg, 11.16-107.84 to 8.00-22.38 microg/g for Pb, and 151.67-645.35 to 144.92-343.50 microg/g for Zn. An important finding of the present study is the significant adverse impact of sedimentary heavy metal bioaccumulation to human through the consumption of demersal fishes in the city of Mersin along the southern coast of Turkey.