Environmental airborne tritium monitoring system based on absorption of tritiated water on calcium chloride.

Environmental monitoring of tritium around nuclear facilities is conducted in order to demonstrate compliance with regulatory requirements on the protection of members of the public. Multiple techniques are used to monitor its concentration in air, soil and flora. A new monitoring system was developed, which is based on the absorption of tritiated water on Calcium Chloride grains. Calcium Chloride has an improved capability to absorb water vapor, compared with other absorbents/adsorbents: it can absorb water vapor as much as three times its own weight. The Calcium Chloride is inserted inside a plastic bag where it interacts with environmental vapor through a membrane filter "window". The tritium absorption rate is then controlled by adjusting the free area of the membrane filter. After the determination of the tritium activity absorbed in the calcium chloride using a liquid scintillation system, a model is used to estimate its airborne concentration, considering the environmental conditions.

Assay of carbon nanoparticles in liquids.

The critical assay of carbon black concentration suffers from the lack of available methods, especially in-situ methods suitable for nanoparticles. We propose a useful tool for monitoring carbon nanoparticles concentration in liquids by means of RGB imaging, fluorescence and conductivity measurements. In this study carbon black particles of 25-75nm size were dispersed within two types of "green" liquids (1-butyl-3-methyl imidazolium based ionic liquids and glycerol) and the effect of carbon nanoparticles concentration on the liquids properties was measured. The conductivity of all the liquids increased with carbon concentration, while the slope of the curve was liquid dependent. The fluorescence intensity of ionic liquids decreased dramatically even when a small amount of carbon was added, while water-containing ionic liquids had a more moderate behavior. Glycerol has no native fluorescence, therefore, a known tracer present in soot (dibenzothiophene), having a characteristic fluorescence monitored by synchronous scan mode, was used. The carbon black effect on RGB imaging shows a linear dependence, while the red counts decreases with contamination. The proposed methods are simple and low-cost but nonetheless sensitive.

Detection of heavy metals in water using dye nano-complexants and a polymeric film.

An optical analytical method, based on complexation reactions of organic azo-dyes with heavy metals, is proposed. It is based on a specially designed polymeric film that when submerged in water contaminated with heavy metals it changes its color. The azo-dyes are injected into the tested water, resulting in formation of nano-particles of insoluble complexes. The polymeric film embeds and dissolves these nano-particles and thus allows for spectral and/or visual analysis. This film consists of a PVC polymeric skeleton and an organic solvent, bis(2-ethylhexyl)phthalate, which possesses high affinity to the heavy metal nano-complexes. The method was exemplified for Cd, Ni and Co ions. The method is sensitive in the sub-ppm range. The mechanism and kinetics of the film coloration were reported.

Quantification of trace metals in water using complexation and filter concentration.

Various metals undergo complexation with organic reagents, resulting in colored products. In practice, their molar absorptivities allow for quantification in the ppm range. However, a proper pre-concentration of the colored complex on paper filter lowers the quantification limit to the low ppb range. In this study, several pre-concentration techniques have been examined and compared: filtering the already complexed mixture, complexation on filter, and dipping of dye-covered filter in solution. The best quantification has been based on the ratio of filter reflectance at a certain wavelength to that at zero metal concentration. The studied complex formations (Ni ions with TAN and Cd ions with PAN) involve production of nanoparticle suspensions, which are associated with complicated kinetics. The kinetics of the complexation of Ni ions with TAN has been investigated and optimum timing could be found. Kinetic optimization in regard to some interferences has also been suggested.

Application of synchronous fluorescence to parchment characterization.

A nondestructive method for quantitative parchment characterization and sensitive indication of its deterioration stage was developed. Synchronous fluorescence (SF) measurements were applied for the first time to parchment samples. The method provides detailed spectral features, which are useful for parchment characterization. The discrimination of parchment samples into groups (modern, historical, and artificially aged) was successfully performed. The SF spectra could be resolved into specific fluorophores, which were related to the parchment condition. The spectral data indicate a continuous change in the collagen-to-gelatin ratio during the aging process. Depth-resolved synchronous fluorescence spectra were also measured. The data indicate that parchments possess a layered structure, and the dominant fluorophore in the upper layer is different from those in the lower layers. Layer-resolved profiling allows for quantifying the contribution of each fluorophore in each given layer. This way, significant differences between modern, artificially aged, and historical samples can be observed.

Non-destructive assessment of parchment deterioration by optical methods.

A non-destructive and non-invasive method for quantitative characterization of parchment deterioration, based on spectral measurements, is proposed. Deterioration due to both natural aging (ancient parchments) and artificial aging (achieved by means of controlled UV irradiation and temperature treatment) was investigated. The effect of aging on parchment native fluorescence was correlated with its deterioration condition. Aging causes fluorescence intensity drop, spectral shift of the main peak, and an overall change in the fluorescence spectral features. Digital color imaging analysis based on visible reflectance from the parchment surface was also applied, and the correspondent color components (RGB) were successively correlated with the state of parchment deterioration/aging. The fluorescence and color imaging data were validated by analysis of historical parchments, aged between 50 and 2000 years and covering a large variety of states of deterioration. The samples were independently assessed by traditional microscopy methods. We conclude that the proposed optical method qualifies well as a non-destructive tool for rapid assessment of the stage of parchment deterioration.

Use of LIBS for rapid characterization of parchment.

Parchment from different sources has been analyzed by laser-induced breakdown spectroscopy (LIBS) for determination of Ca, Na, K, Mg, Fe, Cu, and Mn. The LIBS results were compared with results from inductively coupled plasma spectroscopy (ICP) and good correlation was obtained. Rapid distinction between modern and historical samples was achieved by discriminant analysis of the LIBS data. Animal type recognition was also possible on the basis of Mg/Cu emission peak ratio and Mg depth profiling.