Growth of Anodic Layers on 304L Stainless Steel Using Fluoride Free Electrolytes and Their Electrochemical Behavior in Chloride Solution.

Anodic layers have been grown on 304L stainless steel (304L SS) using two kinds of fluoride-free organic electrolytes. The replacement of NH4F for NaAlO2 or Na2SiO3 in the glycerol solution and the influence of the H2O concentration have been examined. The obtained anodic layers were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and potentiodynamic polarization tests. Here, it was found that, although the anodic layers fabricated within the NaAlO2-electrolyte and high H2O concentrations presented limited adherence to the substrate, the anodizing in the Na2SiO3-electrolyte and low H2O concentrations allowed the growth oxide layers, and even a type of ordered morphology was observed. Furthermore, the electrochemical tests in chloride solution determined low chemical stability and active behavior of oxide layers grown in NaAlO2-electrolyte. In contrast, the corrosion resistance was improved approximately one order of magnitude compared to the non-anodized 304L SS substrate for the anodizing treatment in glycerol, 0.05 M Na2SiO3, and 1.7 vol% H2O at 20 mA/cm2 for 6 min. Thus, this anodizing condition offers insight into the sustainable growth of oxide layers with potential anti-corrosion properties.

Degradation of primary nanoplastics by photocatalysis using different anodized TiO2 structures.

In recent years, plastic pollution has become an environmental problem requiring urgent attention. Recently, the release of nano-sized plastics (<1 µm) into the environment has raised concern due to the possible adverse effects that their small size can have on the trophic web. Advanced oxidation processes are efficient at removing organic pollutants such as dyes and pharmaceuticals, making them a viable approach for treating these hazardous materials. This study proposes the use of photocatalysis as an alternative for removing polystyrene nanoparticles (PS-NPs) from aqueous media. A comparative study was carried out to determine the photocatalytic activity of three different TiO2 photocatalysts synthesized by anodization. Elimination and degradation were monitored by turbidimetry, TOC, FTIR, and GC/MS, and the presence of carbonyl groups and intermediate products was recorded to confirm PS-NP degradation. Statistical analysis revealed that PS-NP elimination using TiO2/T and TiO2/M as photocatalysts was more efficient than with photolysis. The results indicate that the mixed structure (nanotubes/nanograss) reduces the concentration of PS-NPs in dispersion 2 times more efficiently than photolysis with UV light does. Despite the challenges posed by nanoplastic contamination, this study provides a useful remediation approach; a technique that, to date, has received little attention.