Temperature- and Rate-Dependent Pathways in Formation of Metastable Silicon Phases under Rapid Decompression.

High-pressure metallic ß-Sn silicon (Si-II), depending on temperature, decompression rate, stress, etc., may transform to diverse metastable forms with promising semiconducting properties under decompression. However, the underlying mechanisms governing the different transformation paths are not well understood. Here, two distinctive pathways, viz., a thermally activated crystal-crystal transition and a mechanically driven amorphization, were characterized under rapid decompression of Si-II at various temperatures using in situ time-resolved x-ray diffraction. Under slow decompression, Si-II transforms to a crystalline bc8/r8 phase in the pressure range of 4.3-9.2 GPa through a thermally activated process where the overdepressurization and the onset transition strain are strongly dependent on decompression rate and temperature. In comparison, Si-II collapses structurally to an amorphous form at around 4.3 GPa when the volume expansion approaches a critical strain via rapid decompression beyond a threshold rate. The occurrence of the critical strain indicates a limit of the structural metastability of Si-II, which separates the thermally activated and mechanically driven transition processes. The results show the coupled effect of decompression rate, activation barrier, and thermal energy on the adopted transformation paths, providing atomistic insight into the competition between equilibrium and nonequilibrium pathways and the resulting metastable phases.

Li-ion battery material under high pressure: amorphization and enhanced conductivity of Li4Ti5O12.

Lithium titanium oxide (Li4Ti5O12, LTO), a 'zero-strain' anode material for lithium-ion batteries, exhibits excellent cycling performance. However, its poor conductivity highly limits its applications. Here, the structural stability and conductivity of LTO were studied using in situ high-pressure measurements and first-principles calculations. LTO underwent a pressure-induced amorphization (PIA) at 26.9 GPa. The impedance spectroscopy revealed that the conductivity of LTO improved significantly after amorphization and that the conductivity of decompressed amorphous LTO increased by an order of magnitude compared with its starting phase. Furthermore, our calculations demonstrated that the different compressibility of the LiO6 and TiO6 octahedra in the structure was crucial for the PIA. The amorphous phase promotes Li+ diffusion and enhances its ionic conductivity by providing defects for ion migration. Our results not only provide an insight into the pressure depended structural properties of a spinel-like material, but also facilitate exploration of the interplay between PIA and conductivity.

Decompression-Driven Superconductivity Enhancement in In2 Se3.

An unexpected superconductivity enhancement is reported in decompressed In2 Se3 . The onset of superconductivity in In2 Se3 occurs at 41.3 GPa with a critical temperature (Tc ) of 3.7 K, peaking at 47.1 GPa. The striking observation shows that this layered chalcogenide remains superconducting in decompression down to 10.7 GPa. More surprisingly, the highest Tc that occurs at lower decompression pressures is 8.2 K, a twofold increase in the same crystal structure as in compression. It is found that the evolution of Tc is driven by the pressure-induced R-3m to I-43d structural transition and significant softening of phonons and gentle variation of carrier concentration combined in the pressure quench. The novel decompression-induced superconductivity enhancement implies that it is possible to maintain pressure-induced superconductivity at lower or even ambient pressures with better superconducting performance.

Pressure-Induced Structural and Electronic Transition in Sr2ZnWO6 Double Perovskite.

High-pressure structural and electrical properties of Sr2ZnWO6 double perovskite were investigated using in situ angle-dispersive synchrotron X-ray diffraction (XRD), Raman, and alternating current (AC) impedance spectroscopy. A structural transition from monoclinic (P21/n) to triclinic (P1̅) phase around 9 GPa was observed due to the pressure-induced distortion of (W, Zn)O6 octahedron. In situ high-pressure Raman spectroscopy showed the increasing interaction among O-W-O in WO6 octahedron with pressure and a transition pressure consistent with the XRD results. From the AC impedance spectroscopy measurements, the resistivity increased steeply by ∼1 order of magnitude around 11 GPa, indicating an electronic transition accompanying the symmetry change. The increase in the interaction among O-W-O enhances the attraction of O(2-) electrons toward W(6+), thus increasing the covalence, which in turn lowers the charge transfer energy between O(2-) and W(6+) and induces the resistivity increase under high pressure.

Phase transition induced strain in ZnO under high pressure.

Under high pressure, the phase transition mechanism and mechanical property of material are supposed to be largely associated with the transformation induced elastic strain. However, the experimental evidences for such strain are scanty. The elastic and plastic properties of ZnO, a leading material for applications in chemical sensor, catalyst, and optical thin coatings, were determined using in situ high pressure synchrotron axial and radial x-ray diffraction. The abnormal elastic behaviors of selected lattice planes of ZnO during phase transition revealed the existence of internal elastic strain, which arise from the lattice misfit between wurtzite and rocksalt phase. Furthermore, the strength decrease of ZnO during phase transition under non-hydrostatic pressure was observed and could be attributed to such internal elastic strain, unveiling the relationship between pressure induced internal strain and mechanical property of material. These findings are of fundamental importance to understanding the mechanism of phase transition and the properties of materials under pressure.

Note: An anvil-preformed gasket system to extend the pressure range for large volume cubic presses.

An anvil-preformed gasket system has been developed to extend the pressure range for the widely used large volume cubic press without sacrificing the sample volume. The relationship of the sample chamber pressure versus press load for this system was calibrated at room temperature using transitions in Bi, Tl, and Ba. With similar sample volumes (8-11 mm in diameter and 8 mm in length), the anvil-preformed gasket system can generate pressures up to about 8.5 GPa, significantly higher than 6 GPa, which was generally the maximum pressure for the conventional anvil-gasket system. The details on the optimized design for the anvil-preformed gasket system are given in this note.