MnO/ZnO:Zn Thin-Film Frequency Adaptive Heterostructure for Future Sustainable Memristive Systems.

In recent years, advances in materials engineering based on adaptive electronics have found a new paradigm to optimize drawbacks in signal processing. A two-layer MnO/ZnO:Zn heterostructure envisioned for frequency adaptive electronic signal processing is synthesized by sputtering, where the use of internal states allows reconfigurability to obtain new operating modes at different frequency input signals. X-ray diffraction (XRD) analysis is performed on each layer, revealing a cubic structure for MnO and a hexagonal structure for ZnO:Zn with preferential growth in [111] and [002] directions, respectively. Scanning electron microscope (SEM) micrographs show that the surface of both materials is homogeneous and smooth. The thickness for each layer is determined to be approximately 106.3 nm for MnO, 119.3 nm for ZnO:Zn and 224.1 nm for the MnO/ZnO:Zn structure. An electrical characterisation with an oscilloscope and signal generator was carried out to obtain the time-response signals and current-voltage (I-V) curves, where no degradation is detected when changing frequencies within the range of 100 Hz to 1 MHz. An equivalent circuit is proposed to explain the effects in the interface. Measurements of switching speeds from high resistance state (HRS) to low resistance state (LRS) at approximately 17 ns, highlight the device's rapid adaptability, and an estimated switching ratio of approximately 2 × 104 indicates its efficiency as a memristive component. Finally, the MnO/ZnO:Zn heterojunction delivers states that are stable, repeatable, and reproducible, demonstrating how the interaction of the materials can be utilised in adaptive device applications by applying frequencies and internal states to create new and innovative design schematics, thus reducing the number of components/connections in a system for future sustainable electronics.

Stabilized landfill leachate treatment using Guadua amplexifolia bamboo as a source of activated carbon: kinetics study.

In the present study, the characteristics of leachate generated from dumpsite called 'Zapote' located in southern region of Tamaulipas, Mexico were evaluated. The adsorption of non-biodegradable organic matter measured as chemical oxygen demand (COD), color and heavy metals from leachate on activated carbon (AC) prepared in acid media from Guadua amplexifolia bamboo has been studied. In addition, the computation of kinetic parameters during the adsorption process as well as the most probable mechanisms was determined. The ACs were analyzed by using scanning electron microscopy and Fourier transform infrared spectroscopy. The experimental data showed that the ACs removed up to 81.4% of color and reduced COD up to 91.6% after 9 h of reaction at 60°C. For heavy metals, the maximum adsorption uptake was achieved at pH = 8.0 within 20 min with removal percentages of 87.0% (Pb(II)), 43.0% (Cu(II)) and 30.5% (Ni(II)). A pseudo-second-order model explained the adsorption kinetics most effectively for Pb, Ni and Cu, while a pseudo-first order was found for Zn. The AC synthesized from the G. amplexifolia species could be potentially used as an effective adsorbent in the reduction of COD, and removal of color and heavy metals.