The linac coherent light source single particle imaging road map.

Intense femtosecond x-ray pulses from free-electron laser sources allow the imaging of individual particles in a single shot. Early experiments at the Linac Coherent Light Source (LCLS) have led to rapid progress in the field and, so far, coherent diffractive images have been recorded from biological specimens, aerosols, and quantum systems with a few-tens-of-nanometers resolution. In March 2014, LCLS held a workshop to discuss the scientific and technical challenges for reaching the ultimate goal of atomic resolution with single-shot coherent diffractive imaging. This paper summarizes the workshop findings and presents the roadmap toward reaching atomic resolution, 3D imaging at free-electron laser sources.

Crystalline ice as a cryoprotectant: theoretical calculation of cooling speed in capillary tubes.

It is generally assumed that vitrification of both cells and the surrounding medium provides the best preservation of ultrastructure of biological material for study by electron microscopy. At the same time it is known that the cell cytoplasm may provide substantial cryoprotection for internal cell structure even when the medium crystallizes. Thus, vitrification of the medium is not essential for good structural preservation. By contrast, a high cooling rate is an essential factor for good cryopreservation because it limits phase separation and movement of cellular components during freezing, thus preserving the native-like state. Here we present calculations of freezing rates that incorporate the effect of medium crystallization, using finite difference methods. We demonstrate that crystallization of the medium in capillary tubes may increase the cooling rate of suspended cells by a factor of 25-300 depending on the distance from the centre. We conclude that crystallization of the medium, for example due to low cryoprotectant content, may actually improve cryopreservation of some samples in a near native state.

Characterization of intact subcellular bodies in whole bacteria by cryo-electron tomography and spectroscopic imaging.

We illustrate the combined use of cryo-electron tomography and spectroscopic difference imaging in the study of subcellular structure and subcellular bodies in whole bacteria. We limited our goal and focus to bodies with a distinct elemental composition that was in a sufficiently high concentration to provide the necessary signal-to-noise level at the relatively large sample thicknesses of the intact cell. This combination proved very powerful, as demonstrated by the identification of a phosphorus-rich body in Caulobacter crescentus. We also confirmed the presence of a body rich in carbon, demonstrated that these two types of bodies are readily recognized and distinguished from each other, and provided, for the first time to our knowledge, structural information about them in their intact state. In addition, we also showed the presence of a similar type of phosphorus-rich body in Deinococcus grandis, a member of a completely unrelated bacteria genus. Cryo-electron microscopy and tomography allowed the study of the biogenesis and morphology of these bodies at resolutions better than 10 nm, whereas spectroscopic difference imaging provided a direct identification of their chemical composition.

Three-dimensional diffractive imaging for crystalline monolayers with one-dimensional compact support.

The use of a compact support constraint along the beam direction is considered as a solution to the phase problem for diffraction by two-dimensional protein crystals. Specifically we apply the iterative Gerchberg-Saxton-Fienup algorithm to simulated three-dimensional transmission electron diffraction data from monolayer organic crystals. We find that oversampling along the reciprocal-lattice rods (relrods) normal to the monolayer alone does not solve the phase problem in this geometry in general. However, based on simulations for a crystalline protein monolayer (lysozyme), we find that convergence is obtained in three dimensions if phases are supplied from a few high resolution electron microscope images recorded at small tilts to the beam direction. In the absence of noise, amplitude-weighted phase residuals of around 5 degrees, and a cross-correlation coefficient of 0.96 between the true and estimated potential are obtained if phases are included from images at tilts of up to 15 degrees. The performance is almost as good in the presence of noise at a level that is comparable to that commonly observed in electron crystallography of proteins. The method should greatly reduce the time and labor needed for data acquisition and analysis in cryo-electron microscopy of organic thin crystals by avoiding the need to record images at high tilt angles.

Cryoelectron microscopy of lambda phage DNA condensates in vitreous ice: the fine structure of DNA toroids.

DNA toroids produced by the condensation of lambda phage DNA with hexammine cobalt (III) have been investigated by cryoelectron microscopy. Image resolution obtained by this technique has allowed unprecedented views of DNA packing within toroidal condensates. Toroids oriented coplanar with the microscope image plane exhibit circular fringes with a repeat spacing of 2.4 nm. For some toroids these fringes are observed around almost the entire circumference of the toroid. However, for most toroids well-defined fringes are limited to less than one-third of the total toroid circumference. Some toroids oriented perpendicular to the image plane reveal DNA polymers organized in a hexagonal close-packed lattice; however, for other toroids alternative packing arrangements are observed. To aid interpretation of electron micrographs, three-dimensional model toroids were generated with perfect hexagonal DNA packing throughout, as well as more physically realistic models that contain crossover points between DNA loops. Simulated transmission electron microscopy images of these model toroids in different orientations faithfully reproduce most features observed in cryoelectron micrographs of actual toroids.

Refined structure of alpha beta-tubulin at 3.5 A resolution.

We present a refined model of the alpha beta-tubulin dimer to 3.5 A resolution. An improved experimental density for the zinc-induced tubulin sheets was obtained by adding 114 electron diffraction patterns at 40-60 degrees tilt and increasing the completeness of structure factor amplitudes to 84.7 %. The refined structure was obtained using maximum-likelihood including phase information from experimental images, and simulated annealing Cartesian refinement to an R-factor of 23.2 and free R-factor of 29.7. The current model includes residues alpha:2-34, alpha:61-439, beta:2-437, one molecule of GTP, one of GDP, and one of taxol, as well as one magnesium ion at the non-exchangeable nucleotide site, and one putative zinc ion near the M-loop in the alpha-tubulin subunit. The acidic C-terminal tails could not be traced accurately, neither could the N-terminal loop including residues 35-60 in the alpha-subunit. There are no major changes in the overall fold of tubulin with respect to the previous structure, testifying to the quality of the initial experimental phases. The overall geometry of the model is, however, greatly improved, and the position of side-chains, especially those of exposed polar/charged groups, is much better defined. Three short protein sequence frame shifts were detected with respect to the non-refined structure. In light of the new model we discuss details of the tubulin structure such as nucleotide and taxol binding sites, lateral contacts in zinc-sheets, and the significance of the location of highly conserved residues.

Structure of an early intermediate in the M-state phase of the bacteriorhodopsin photocycle.

The structure of an early M-intermediate of the wild-type bacteriorhodopsin photocycle formed by actinic illumination at 230 K has been determined by x-ray crystallography to a resolution of 2.0 A. Three-dimensional crystals were trapped by illuminating with actinic light at 230 K, followed by quenching in liquid nitrogen. Amide I, amide II, and other infrared absorption bands, recorded from single bacteriorhodopsin crystals, confirm that the M-substate formed represents a structure that occurs early after deprotonation of the Schiff base. Rotation about the retinal C13-C14 double bond appears to be complete, but a relatively large torsion angle of 26 degrees is still seen for the C14-C15 bond. The intramolecular stress associated with the isomerization of retinal and the subsequent deprotonation of the Schiff base generates numerous small but experimentally measurable structural changes within the protein. Many of the residues that are displaced during the formation of the late M (M(N)) substate formed by three-dimensional crystals of the D96N mutant (Luecke et al., 1999b) are positioned, in early M, between their resting-state locations and the ones which they will adopt at the end of the M phase. The relatively small magnitude of atomic displacements observed in this intermediate, and the well-defined positions adopted by nearly all of the atoms in the structure, may make the formation of this structure favorable to model (simulate) by molecular dynamics.

The binding conformation of Taxol in beta-tubulin: a model based on electron crystallographic density.

The chemotherapeutic drug Taxol is known to interact within a specific site on beta-tubulin. Although the general location of the site has been defined by photoaffinity labeling and electron crystallography, the original data were insufficient to make an absolute determination of the bound conformation. We have now correlated the crystallographic density with analysis of Taxol conformations and have found the unique solution to be a T-shaped Taxol structure. This T-shaped or butterfly structure is optimized within the beta-tubulin site and exhibits functional similarity to a portion of the B9-B10 loop in the alpha-tubulin subunit. The model provides structural rationalization for a sizeable body of Taxol structure-activity relationship data, including binding affinity, photoaffinity labeling, and acquired mutation in human cancer cells.

Dinitroaniline herbicides against protozoan parasites: the case of Trypanosoma cruzi.

The drugs presently in use against Chagas disease are very toxic, inducing a great number of side effects. Alternative treatments are necessary, not only for Chagas disease but also for other diseases caused by protozoan parasites where current drugs pose toxicity problems. The plant microtubule inhibitor trifluralin has previously been tested with success against Leishmania, Trypanosoma brucei and several other protozoan parasites. Trypanosoma cruzi, the causative agent of Chagas disease, is also sensitive to the drug. This sensitivity has been correlated with the deduced amino acid sequences of alpha- and beta-tubulin of T. cruzi as compared with plant, mammal and other parasite sequences.

Lipid-layer crystallization and preliminary three-dimensional structural analysis of AcrA, the periplasmic component of a bacterial multidrug efflux pump.

The multidrug efflux complex AcrAB-TolC confers intrinsic drug resistance in Escherichia coli by pumping antibiotics out of the cell. We determined a low-resolution (20 A) structure of AcrA, the periplasmic component, by electron crystallography. Expressed with a His-tag at its carboxyl-terminus, the protein bound to lipid layers containing the nickel-chelating phospholipid DOGS-NTA. Under the lipid layers, AcrA crystallized in layer group P2(1)22, with a unit cell size of 157 by 95 A and a thickness of about 100 A. The four asymmetric units in the unit cell are organized into what appears to be two rings, each with a central opening of 30 A in diameter. Within each ring, the density can be interpreted as following a pseudo-helical path, approximately 210 A long. This length matches that of monomeric AcrA in solution, previously estimated by light scattering and hydrodynamic measurements. On one side the density has a tubular shape, with a thickness of about 25 A, while on the other side the densities of the upper and lower parts of the pseudo-helical path are fused into a shield.

Structural basis for the interaction of tubulin with proteins and drugs that affect microtubule dynamics.

The microtubule cytoskeleton is a highly regulated system. At different times in the cell cycle and positions within the organism, microtubules can be very stable or highly dynamic. Stability and dynamics are regulated by interaction with a large number of proteins that themselves may change at specific points in the cell cycle. Exogenous ligands can disrupt the normal processes by either increasing or decreasing microtubule stability and inhibiting their dynamic behavior. The recent determination of the structure of tubulin, the main component of microtubules, makes it possible now to begin to understand the details of these interactions. We review here the structure of the tubulin dimer, with particular regard to how proteins and drugs may bind and modulate microtubule dynamics.

Cold adaptation of microtubule assembly and dynamics. Structural interpretation of primary sequence changes present in the alpha- and beta-tubulins of Antarctic fishes.

The microtubules of Antarctic fishes, unlike those of homeotherms, assemble at very low temperatures (-1.8 degrees C). The adaptations that enhance assembly of these microtubules are intrinsic to the tubulin dimer and reduce its critical concentration for polymerization at 0 degrees C to approximately 0.9 mg/ml (Williams, R. C., Jr., Correia, J. J., and DeVries, A. L. (1985) Biochemistry 24, 2790-2798). Here we demonstrate that microtubules formed by pure brain tubulins of Antarctic fishes exhibit slow dynamics at both low (5 degrees C) and high (25 degrees C) temperatures; the rates of polymer growth and shortening and the frequencies of interconversion between these states are small relative to those observed for mammalian microtubules (37 degrees C). To investigate the contribution of tubulin primary sequence variation to the functional properties of the microtubules of Antarctic fishes, we have sequenced brain cDNAs that encode 9 alpha-tubulins and 4 beta-tubulins from the yellowbelly rockcod Notothenia coriiceps and 4 alpha-tubulins and 2 beta-tubulins from the ocellated icefish Chionodraco rastrospinosus. The tubulins of these fishes were found to contain small sets of unique or rare residue substitutions that mapped to the lateral, interprotofilament surfaces or to the interiors of the alpha- and beta-polypeptides; longitudinal interaction surfaces are not altered in the fish tubulins. Four changes (A278T and S287T in alpha; S280G and A285S in beta) were present in the S7-H9 interprotofilament "M" loops of some monomers and would be expected to increase the flexibility of these regions. A fifth lateral substitution specific to the alpha-chain (M302L or M302F) may increase the hydrophobicity of the interprotofilament interaction. Two hydrophobic substitutions (alpha:S187A in helix H5 and beta:Y202F in sheet S6) may act to stabilize the monomers in conformations favorable to polymerization. We propose that cold adaptation of microtubule assembly in Antarctic fishes has occurred in part by evolutionary restructuring of the lateral surfaces and the cores of the tubulin monomers.

Structure-function relationships in yeast tubulins.

A comprehensive set of clustered charged-to-alanine mutations was generated that systematically alter TUB1, the major alpha-tubulin gene of Saccharomyces cerevisiae. A variety of phenotypes were observed, including supersensitivity and resistance to the microtubule-destabilizing drug benomyl, lethality, and cold- and temperature-sensitive lethality. Many of the most benomyl-sensitive tub1 alleles were synthetically lethal in combination with tub3Delta, supporting the idea that benomyl supersensitivity is a rough measure of microtubule instability and/or insufficiency in the amount of alpha-tubulin. The systematic tub1 mutations were placed, along with the comparable set of tub2 mutations previously described, onto a model of the yeast alpha-beta-tubulin dimer based on the three-dimensional structure of bovine tubulin. The modeling revealed a potential site for binding of benomyl in the core of beta-tubulin. Residues whose mutation causes cold sensitivity were concentrated at the lateral and longitudinal interfaces between adjacent subunits. Residues that affect binding of the microtubule-binding protein Bim1p form a large patch across the exterior-facing surface of alpha-tubulin in the model. Finally, the positions of the mutations suggest that proximity to the alpha-beta interface may account for the finding of synthetic lethality of five viable tub1 alleles with the benomyl-resistant but otherwise entirely viable tub2-201 allele.

A common pharmacophore for epothilone and taxanes: molecular basis for drug resistance conferred by tubulin mutations in human cancer cells.

The epothilones are naturally occurring antimitotic drugs that share with the taxanes a similar mechanism of action without apparent structural similarity. Although photoaffinity labeling and electron crystallographic studies have identified the taxane-binding site on beta-tubulin, similar data are not available for epothilones. To identify tubulin residues important for epothilone binding, we have isolated two epothilone-resistant human ovarian carcinoma sublines derived in a single-step selection with epothilone A or B. These epothilone-resistant sublines exhibit impaired epothilone- and taxane-driven tubulin polymerization caused by acquired beta-tubulin mutations (beta274(Thr-->Ile) and beta282(Arg-->Gln)) located in the atomic model of alphabeta-tubulin near the taxane-binding site. Using molecular modeling, we investigated the conformational behavior of epothilone, which led to the identification of a common pharmacophore shared by taxanes and epothilones. Although two binding modes for the epothilones were predicted, one mode was identified as the preferred epothilone conformation as indicated by the activity of a potent pyridine-epothilone analogue. In addition, the structure-activity relationships of multiple taxanes and epothilones in the tubulin mutant cells can be fully explained by the model presented here, verifying its predictive value. Finally, these pharmacophore and activity data from mutant cells were used to model the tubulin binding of sarcodictyins, a distinct class of microtubule stabilizers, which in contrast to taxanes and the epothilones interact preferentially with the mutant tubulins. The unification of taxane, epothilone, and sarcodictyin chemistries in a single pharmacophore provides a framework to study drug-tubulin interactions that should assist in the rational design of agents targeting tubulin.

Cryo-electron microscopy of GDP-tubulin rings.

Rings of guanosine diphosphate (GDP)-tubulin formed in the presence of divalent cations have been studied using conventional negative stain and cryo-electron microscopy. The structure of such rings resembles that of depolymerizing microtubule ends and corresponds to an "unconstrained" conformation of tubulin in its GDP state. The use of cryo-techniques has allowed us to image the ring polymers free from dehydration and flattening artifacts. Preparations of frozen-hydrated GDP-tubulin rings are generally heterogeneous and contain a mixture of double, triple, and incomplete rings, as well as spirals and some rare single rings. Images of different polymer types can be identified and classified into groups that are then amenable for averaging and single particle reconstruction methods. Identifying the differences in tubulin structure, between straight and curve protofilaments, will be important to understand the molecular bases of dynamic instability in microtubules.

Visualizing a new binding site of ncd-motor domain on tubulin.

Ncd is a microtubule minus-end directed motor of the kinesin superfamily. Previously it has been shown that ncd and kinesin motor domains share the same major binding site on microtubules. Here we report a three-dimensional EM reconstruction of negatively stained two-dimensional Zn-induced tubulin crystal sheets (Zn-sheets) decorated with the ncd motor domain at a resolution of 16 A. This work has revealed a second specific binding site for the ncd motor domain. The motor binding site on the tubulin Zn-sheets spans both alpha and beta tubulin subunits. This binding site is located at a position different from the previously identified ncd binding site on microtubules and may play a role in motor function.

High-resolution model of the microtubule.

A high-resolution model of the microtubule has been obtained by docking the crystal structure of tubulin into a 20 A map of the microtubule. The excellent fit indicates the similarity of the tubulin conformation in both polymers and defines the orientation of the tubulin structure within the microtubule. Long C-terminal helices form the crest on the outside of the protofilament, while long loops define the microtubule lumen. The exchangeable nucleotide in beta-tubulin is exposed at the plus end of the microtubule, while the proposed catalytic residue in alpha-tubulin is exposed at the minus end. Extensive longitudinal interfaces between monomers have polar and hydrophobic components. At the lateral contacts, a nucleotide-sensitive helix interacts with a loop that contributes to the binding site of taxol in beta-tubulin.

Performance of a 2k CCD camera designed for electron crystallography at 400 kV.

We discuss the performance of a charge-coupled device (CCD) camera that has been designed for use in electron crystallographic studies of proteins. There have been many previous publications describing the characteristics and performance of CCD-based cameras in electron microscopy; here we focus on characteristics relevant to protein studies at 400 kV. The low exposure that must be used in such studies produces a very poor signal-to-noise ratio, so any loss of signal-to-noise ratio in the recording process must be avoided. Images must contain a sufficient number of molecules to allow identification of the reciprocal lattice, thus requiring a large image format. Electron diffraction patterns may contain some spots with intensity around 10(-7) times that of the central beam, so the largest possible dynamic range is helpful. Some of the characteristics we discuss are most easily measured with crystals, but the conclusions also apply for other work such as single-particle analyses. The camera has been optimized for work at 400 kV with a P43 scintillator fiber-optically coupled to a CCD with 24 microns pixels. The scintillator in this camera is thicker than generally used at lower voltages, which provides an adequate signal level but slightly degrades the resolution. Operation at 400 kV leads to a point spread function that is broader than the CCD pixel size. Images are thus binned by a factor of two to double the effective pixel size, with the resulting loss of a factor of two in the size of areas that can be recorded in a single frame. A large CCD with a 2048 x 2048 pixel array is used to compensate for this loss and provide a sufficient signal for the crystallographic image processing used in this work. Images and electron diffraction patterns recorded on the CCD are compared with data recorded on photographic film. While the quality of the images recorded on the CCD at the low exposures required in protein studies is not quite as good as that on film, electron diffraction data recorded on the CCD are superior to that on film.

Alf1p, a CLIP-170 domain-containing protein, is functionally and physically associated with alpha-tubulin.

Tubulin is a heterodimer of alpha- and beta-tubulin polypeptides. Assembly of the tubulin heterodimer in vitro requires the CCT chaperonin complex, and a set of five proteins referred to as the tubulin cofactors (Tian, F., Y. Huang, H. Rommelaere, J. Vandekerckhove, C. Ampe, and N.J. Cowan. 1996. Cell. 86:287-296; Tian, G., S.A. Lewis, B. Feierbach, T. Stearns, H. Rommelaere, C. Ampe, and N.J. Cowan. 1997. J. Cell Biol. 138:821-832). We report the characterization of Alf1p, the yeast ortholog of mammalian cofactor B. Alf1p interacts with alpha-tubulin in both two-hybrid and immunoprecipitation assays. Alf1p and cofactor B contain a single CLIP-170 domain, which is found in several microtubule-associated proteins. Mutation of the CLIP-170 domain in Alf1p disrupts the interaction with alpha-tubulin. Mutations in alpha-tubulin that disrupt the interaction with Alf1p map to a domain on the cytoplasmic face of alpha-tubulin; this domain is distinct from the region of interaction between alpha-tubulin and beta-tubulin. Alf1p-green fluorescent protein (GFP) is able to associate with microtubules in vivo, and this localization is abolished either by mutation of the CLIP-170 domain in Alf1p, or by mutation of the Alf1p-binding domain in alpha-tubulin. Analysis of double mutants constructed between null alleles of ALF1 and PAC2, which encodes the other yeast alpha-tubulin cofactor, suggests that Alf1p and Pac2p act in the same pathway leading to functional alpha-tubulin. The phenotype of overexpression of ALF1 suggests that Alf1p can act to sequester alpha-tubulin from interaction with beta-tubulin, raising the possibility that it plays a regulatory role in the formation of the tubulin heterodimer.