New phase equilibrium analyzer for determination of the vapor-liquid equilibrium of carbon dioxide and permanent gas mixtures for carbon capture and storage.

A high-pressure, phase equilibrium analyzer incorporating a fiber-optic reflectometer is described. The analyzer has been designed for measuring the vapor-liquid equilibrium data of multi-component mixtures of carbon dioxide and permanent gases, providing a novel tool to acquire of a large number of phase equilibrium data for the development of the new carbon capture and storage technologies. We demonstrate that the analyzer is suitable for determining both the bubble- and dew-point lines at temperature from 253 K and pressure up to 25 MPa using pure CO2 and two binary mixtures of CO2 + N2 and CO2 + H2.

Swellable, water- and acid-tolerant polymer sponges for chemoselective carbon dioxide capture.

To impact carbon emissions, new materials for carbon capture must be inexpensive, robust, and able to adsorb CO2 specifically from a mixture of other gases. In particular, materials must be tolerant to the water vapor and to the acidic impurities that are present in gas streams produced by using fossil fuels to generate electricity. We show that a porous organic polymer has excellent CO2 capacity and high CO2 selectivity under conditions relevant to precombustion CO2 capture. Unlike polar adsorbents, such as zeolite 13x and the metal-organic framework, HKUST-1, the CO2 adsorption capacity for the hydrophobic polymer is hardly affected by the adsorption of water vapor. The polymer is even stable to boiling in concentrated acid for extended periods, a property that is matched by few microporous adsorbents. The polymer adsorbs CO2 in a different way from rigid materials by physical swelling, much as a sponge adsorbs water. This gives rise to a higher CO2 capacities and much better CO2 selectivity than for other water-tolerant, nonswellable frameworks, such as activated carbon and ZIF-8. The polymer has superior function as a selective gas adsorbent, even though its constituent monomers are very simple organic feedstocks, as would be required for materials preparation on the large industrial scales required for carbon capture.

Instant MOFs: continuous synthesis of metal-organic frameworks by rapid solvent mixing.

A continuous flow reactor allows the preparation of porous metal-organic framework materials with crystallisation induced by rapid mixing of streams of preheated water and solutions of reagents in organic solvent: this gives high volume production (132 g h(-1)) with crystallite size of the products from nanoscale to micron.

Impact of water coadsorption for carbon dioxide capture in microporous polymer sorbents.

Alcohol-containing polymer networks synthesized by Friedel-Crafts alkylation have surface areas of up to 1015 m(2)/g. Both racemic and chiral microporous binaphthol (BINOL) networks can be produced by a simple, one-step route. The BINOL networks show higher CO(2) capture capacities than their naphthol counterparts under idealized, dry conditions. In the presence of water vapor, however, these BINOL networks adsorb less CO(2) than more hydrophobic analogues, suggesting that idealized measurements may give a poor indication of performance under more realistic carbon capture conditions.

Biodegradation of oak (Quercus alba) wood during growth of the shiitake mushroom (Lentinula edodes): a molecular approach.

The chemical transformations that occur during growth of the shiitake mushroom (Lentinula edodes) on oak (Quercus alba) were investigated to improve mushroom cultivation and utilization of the spent substrate. Oak logs were decayed by L. edodes over 8 years, during which time they were sampled at six intervals (30, 40, 66, 76, 77, and 101 months). Fresh and decayed oak samples were analyzed using solid-state (13)C NMR and pyrolysis-gas chromatography-mass spectrometry as well as off-line thermochemolysis with tetramethylammonium hydroxide. Degraded oak exhibited lower carbon contents and increased oxygen content compared to the control. Solid-state (13)C NMR analysis revealed that polysaccharides were the major component of both fresh and decayed oak but that L. edodes mediated the preferential loss of cellulose and xylans as compared to lignin, which remained in an altered form. Several trends point toward the degradation of lignin, including a decrease in the proportion of syringyl units as compared to guaiacyl units and a reduction in side-chain length. An increase in guaiacyl and syringyl acid-to-aldehyde ratios occurred with growth, which suggested that the fungus had caused oxidation of Calpha-Cbeta bonds. The overall effect of L. edodes on oak is similar to that of many white-rot fungi, which simultaneously degrade all cell wall components.