Mechanically Enhancing Planar Lipid Bilayers with a Minimal Actin Cortex.

All cells in all domains of life possess a cytoskeleton that provides mechanical resistance to deformation and general stability to the plasma membrane. Here, we utilize a two-dimensional scaffolding created by actin filaments to convey mechanical support upon relatively fragile planar bilayer membranes (black lipid membranes, BLMs). Robust biomembranes play a critical role in the development of protein nanopore sensor applications and might also prove helpful in ion-channel research. Our investigation utilizes a minimal actin cortex (MAC) that is formed by anchoring actin filaments to lipid membranes via a biotin-streptavidin-biotin bridge. We characterize the joined structure using various modes of optical microscopy, electrophysiology, and applied mechanical stress (including measurements of elastic modulus). Our findings show the resulting structure includes a thin supporting layer of actin. Electrical studies indicate that the integrity of the MAC-bilayer composite remains unchanged over the limits of our tests (i.e., hours to days). The actin filament structure can remain intact for months. Minimalistic layering of the actin support network produces an increase in the apparent elastic modulus of the MAC-derivatized bilayer by >100×, compared to unmodified BLMs. Furthermore, the resistance to applied stress improves with the number of actin layers, which can be cross-linked to arbitrary thicknesses, in principle. The weblike support structure retains the lateral fluidity of the BLM, maintains the high electrical resistance typical of traditional BLMs, enables relatively uninhibited molecular access to the lipid surface from bulk solution, and permits nanopore self-assembly and insertion in the bilayer. These interfacial features are highly desirable for ion-channel and nanopore sensing applications.

Surface Modification of Water Purification Membranes.

Polymeric membranes are an energy-efficient means of purifying water, but they suffer from fouling during filtration. Modification of the membrane surface is one route to mitigating membrane fouling, as it helps to maintain high levels of water productivity. Here, a series of common techniques for modification of the membrane surface are reviewed, including surface coating, grafting, and various treatment techniques such as chemical treatment, UV irradiation, and plasma treatment. Historical background on membrane development and surface modification is also provided. Finally, polydopamine, an emerging material that can be easily deposited onto a wide variety of substrates, is discussed within the context of membrane modification. A brief summary of the chemistry of polydopamine, particularly as it may pertain to membrane development, is also described.

Harnessing the chemistry of graphene oxide.

Our understanding of the fundamental structure and bonding of graphene oxide (GO) as well as the scope of its utility have grown tremendously over the past decade. As a result, the pace of research efforts directed toward this carbon material continues to increase. Contemporary application now intersects a variety of disciplines and includes heterogeneous catalysis, flow reactor technologies, biomedicine and biotechnology, polymer composites, energy storage, and chemical sensors. Advances in these areas have been buoyed by improvements in the methods used to synthesize and characterize GO, as well as functionalized derivatives thereof. While the diverse uses of GO have been reviewed previously, herein we provide an overview of some of the most recent and significant developments in the field. A brief overview of GO's synthesis and characterization is also provided as well as several recently proposed structural models. The inherent reactivity of GO is described in the context of catalysis, and the utilization of GO's reactive oxygen groups and carbon framework to prepare functionalized derivatives is also discussed. Finally, we provide an outlook of potential areas where GO, its derivatives, and related materials may be expected to find utility or opportunity for further growth and study.

Combined measurement of translational and rotational diffusion in quaternary acyclic ammonium and cyclic pyrrolidinium ionic liquids.

The translational self-diffusion coefficients (D(T)) for a series of tetra-alkyl acyclic ammonium and cyclic pyrrolidinium ionic liquids (ILs) were measured using (1)H pulse field gradient (PFG) NMR spectroscopy over various temperatures. These NMR diffusion results were combined with previously measured rotational diffusion coefficients (D(R)) obtained from (14)N NMR relaxation measurements for the same ILs (Alam, T. M.; et al. J. Phys. Chem. A 2011, 115, 4307- 4316). The D(T)/D(R) ratio was then used to estimate the effective hydrodynamic radius and corresponding volumes without the need to directly measure the viscosities of the ILs. The generality, validity, and performance of using this D(T)/D(R) ratio is discussed and compared to the effective hydrodynamic volumes obtained using classic D(T)/viscosity and D(R)/viscosity relationships. The temperature variation observed for the molecular volumes obtained using the D(T)/D(R) ratio is argued to be a signature for the breakdown or decoupling of the Stokes-Einstein and Stoke-Einstein-Debye relationships in these neat IL systems, consistent with recent molecular dynamic simulations.

Elucidating the structure of poly(dopamine).

Herein we propose a new structure for poly(dopamine), a synthetic eumelanin that has found broad utility as an antifouling agent. Commercially available 3-hydroxytyramine hydrochloride (dopamine HCl) was polymerized under aerobic, aqueous conditions using tris(hydroxymethyl)aminomethane (TRIS) as a basic polymerization initiator, affording a darkly colored powder product upon isolation. The polymer was analyzed using a variety of solid state spectroscopic and crystallographic techniques. Collectively, the data showed that in contrast to previously proposed models, poly(dopamine) is not a covalent polymer but instead a supramolecular aggregate of monomers (consisting primarily of 5,6-dihydroxyindoline and its dione derivative) that are held together through a combination of charge transfer, π-stacking, and hydrogen bonding interactions.

Graphite oxide: a selective and highly efficient oxidant of thiols and sulfides.

The selective oxidation of thiols to disulfides and sulfides to sulfoxides using graphite oxide (GO), a heterogeneous carbocatalyst obtained from low cost, commercial starting materials is described. The aforementioned oxidation reactions were found to proceed rapidly (as short as 10 min in some cases) and in good yield (51-100%) (19 examples). No over-oxidation of the substrates was observed, and GO's heterogeneous nature facilitated isolation and purification of the target products.

Measuring molecular dynamics and activation energies for quaternary acyclic ammonium and cyclic pyrrolidinium ionic liquids using 14N NMR spectroscopy.

The (14)N NMR spin-lattice (R(1)) and spin-spin (R(2)) relaxation rates were determined as a function of temperature for a series of tetra-alkyl acyclic ammonium and cyclic pyrrolidinium ionic liquids (ILs). Through the use of the R(2)/R(1) ratio method, it was shown that for the majority of these ILs, the reorientational dynamics are not in the extreme narrowing regime, but instead are in the dispersive relaxation regime, thus allowing a unique solution for the correlation time to be determined. The temperature variation of the R(2) relaxation rate, along with the temperature variation of the calculated correlation times, allowed activation energies for the reorientational dynamics to be measured and compared. In addition, these NMR relaxation experiments enabled the (14)N quadrupolar coupling product to be extracted, which revealed surprising temperature dependence. Collectively, the (14)N NMR results allow the impact of cation and anion identity on the local reorientational dynamics of these ILs to be delineated.

Mesoporous carbon capsules as electrode materials in electrochemical double layer capacitors.

The performance of mesoporous carbon capsules as electrode materials in electrochemical double layer capacitors (EDLCs) was evaluated in the presence of a variety of electrolytes, including room temperature ionic liquids (ILs).

High-performance supercapacitors based on poly(ionic liquid)-modified graphene electrodes.

We report a high-performance supercapacitor incorporating a poly(ionic liquid)-modified reduced graphene oxide (PIL:RG-O) electrode and an ionic liquid (IL) electrolyte (specifically, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide or EMIM-NTf(2)). PIL:RG-O provides enhanced compatibility with the IL electrolyte, thereby increasing the effective electrode surface area accessible to electrolyte ions. The supercapacitor assembled with PIL:RG-O electrode and EMIM-NTf(2) electrolyte showed a stable electrochemical response up to 3.5 V operating voltage and was capable of yielding a maximum energy density of 6.5 W·h/kg with a power density of 2.4 kW/kg. These results demonstrate the potential of the PIL:RG-O material as an electrode in high-performance supercapacitors.

From conception to realization: an historial account of graphene and some perspectives for its future.

There has been an intense surge in interest in graphene during recent years. However, graphene-like materials derived from graphite oxide were reported in 1962, and related chemical modifications of graphite were described as early as 1840. In this detailed account of the fascinating development of the synthesis and characterization of graphene, we hope to demonstrate that the rich history of graphene chemistry laid the foundation for the exciting research that continues to this day. Important challenges remain, however; many with great technological relevance.

Polymer Brushes via Controlled, Surface-Initiated Atom Transfer Radical Polymerization (ATRP) from Graphene Oxide.

A method for growing polymers directly from the surface of graphene oxide is demonstrated. The technique involves the covalent attachment of an initiator followed by the polymerization of styrene, methyl methacrylate, or butyl acrylate using atom transfer radical polymerization (ATRP). The resulting materials were characterized using a range of techniques and were found to significantly improve the solubility properties of graphene oxide. The surface-grown polymers were saponified from the surface and also characterized. Based on these results, the ATRP reactions were determined to proceed in a controlled manner and were found to leave the structure of the graphene oxide largely intact.

The chemistry of graphene oxide.

The chemistry of graphene oxide is discussed in this critical review. Particular emphasis is directed toward the synthesis of graphene oxide, as well as its structure. Graphene oxide as a substrate for a variety of chemical transformations, including its reduction to graphene-like materials, is also discussed. This review will be of value to synthetic chemists interested in this emerging field of materials science, as well as those investigating applications of graphene who would find a more thorough treatment of the chemistry of graphene oxide useful in understanding the scope and limitations of current approaches which utilize this material (91 references).