Selective detection of ionic liquid fluorescence probes for visual colorimetry of different metal ions.

At present, the fast distinction of different metal ions in pure water media is not only a great challenge, but also drives the protection of water quality in environmental water bodies. In this paper, a novel ionic liquid fluorescent probe Glycolic Acid-L-Arginine (GA-L-Arg) was rationally created and designed through an in-depth study of ionic liquids. It is also used as an innovative multi-ion fluorescent probe for colorimetric detection and separate identification of Fe3+ and Co2+ in aqueous solutions of various metal ions. GA-L-Arg has excellent water solubility due to the strong hydrophilicity of Glycolic Acid and L-Arginine. The probe showed high sensitivity, extremely significant selectivity, and great pH stability for Fe3+ and Co2+ in pure water. The GA-L-Arg structure and the mechanism of Fe3+ and Co2+ detection were analyzed by infrared spectroscopic characterization and quantum chemical calculations. More importantly, the distinct colorimetric partitioning of Fe3+ and Co2+ was performed by the unique extraction of Fe3+ in the presence of the fluorescent probe and buffer solution.

Comparison of the accuracy of multiplex digital PCR versus multiplex ligation-dependent probe amplification in quantification of the survival of motor neuron genes copy numbers.

For over two decades, multiplex ligation-dependent probe amplification (MLPA) has served as the gold standard for genetic testing of spinal muscular atrophy. However, there is emerging evidence questioning the reliability of MLPA in determining the copy numbers (CNs) of the survival of motor neuron (SMN) gene in certain cases. Recently, digital polymerase chain reaction (dPCR) has shown potential for better performance in copy number variant detection. This study aimed to compare MLPA and dPCR in quantifying SMN1 and SMN2 CNs, identify reasons for observed discrepancies, and explore the clinical implications of false results. A total of 733 DNA samples, previously subjected to MLPA analysis, were tested using multiplex droplet dPCR assays. Samples exhibiting inconsistent results between the two methods underwent repeated dPCR assays. When inconsistencies persisted, a third method was employed for verification. Digital PCR yielded results consistent with those of MLPA in 94.4% (692/733) of samples. Forty-one cases exhibited quantitative disparities in SMN1 and/or SMN2 CNs between the two methods. Confirmatory tests revealed that 37 inaccurate results were produced by the MLPA analysis, whereas four were attributed to the dPCR method. The dPCR technique exhibits better accuracy than MLPA and is qualified for SMA genetic testing across various clinical scenarios.

Single-lens dynamic [Formula: see text]-scanning for simultaneous in situ position detection and laser processing focus control.

Existing auto-focusing methods in laser processing typically include two independent modules, one for surface detection and another for [Formula: see text]-axis adjustment. The latter is mostly implemented by mechanical [Formula: see text] stage motion, which is up to three orders of magnitude slower than the lateral processing speed. To alleviate this processing bottleneck, we developed a single-lens approach, using only one high-speed [Formula: see text]-scanning optical element, to accomplish both in situ surface detection and focus control quasi-simultaneously in a dual-beam setup. The probing beam scans the surface along the [Formula: see text]-axis continuously, and its reflection is detected by a set of confocal optics. Based on the temporal response of the detected signal, we have developed and experimentally demonstrated a dynamic surface detection method at 140-350 kHz, with a controlled detection range, high repeatability, and minimum linearity error of 1.10%. Sequentially, by synchronizing at a corresponding oscillation phase of the [Formula: see text]-scanning lens, the fabrication beam is directed to the probed [Formula: see text] position for precise focus alignment. Overall, our approach provides instantaneous surface tracking by collecting position information and executing focal control both at 140-350 kHz, which significantly accelerates the axial alignment process and offers great potential for enhancing the speed of advanced manufacturing processes in three-dimensional space.

Hotspots analysis and perspectives of Prussian blue analogues (PBAs) in environment and energy in recent 20 years by CiteSpace.

Prussian blue analogs (PBAs), a type of metal-organic frameworks (MOFs), have attracted much attention because of their large specific surface area, high porosity, easy synthesis, and low cost. This paper presents the first review of PBAs by applying the bibliometric visualization software CiteSpace. The co-occurrence, co-citation, and clustering analysis of 2214 articles in the Web of Science database on the topic of "Prussian blue analogs" over the past 20 years were performed. The results provide a comprehensive overview of the evolution of the research hotspots for this material, and most importantly, it is identified that the research hotspots and trends for PBAs materials are concentrated in the environmental and energy fields. For example, the material is used as an adsorbent or catalyst to reduce pollutants, produce clean energy, or for energy storage applications such as batteries or supercapacitors. Finally, some outlooks are provided on the future research trends of this material in the environmental and energy fields, presenting the challenges faced by this material. For instance, the conductivity and corrosion resistance of the material needs to be improved and secondary contamination should be decreased or even avoided. It is believed that this paper would provide a comprehensive, systematic, and dynamic overview of the research of PBAs, and promote the future research of PBAs in the fields of environment and energy.

Multi-focal laser processing in transparent materials using an ultrafast tunable acoustic lens.

Fast and versatile alteration of focal positions is critical for applications including selective volumetric modification and parallel laser processing. In this Letter, we implement and characterize an ultrafast, variable focal system using a tunable acoustic gradient of index lens to achieve multi-focal laser processing. We apply our method to the femtosecond laser-induced intra-volumetric modification in glass to show the flexibility in controlling focal positions. Based on this understanding, we exploit the multi-focal nature of the system to demonstrate laser machining on both surfaces of a transparent glass slide in a single lateral scan.

Free-Standing rGO-CNT Nanocomposites with Excellent Rate Capability and Cycling Stability for Na2SO4 Aqueous Electrolyte Supercapacitors.

Facing the increasing demand for various renewable energy storage devices and wearable and portable energy storage systems, the research on electrode materials with low costs and high energy densities has attracted great attention. Herein, free-standing rGO-CNT nanocomposites have been successfully synthesized by a facile hydrothermal method, in which the hierarchical porous network nanostructure is synergistically assembled by rGO nanosheets and CNT with interlaced network distribution. The rGO-CNT composite electrodes with synergistic enhancement of rGO and CNT exhibit high specific capacitance, excellent rate capability, exceptional conductivity and outstanding long-term cycling stability, especially for the optimal rGO-CNT30 electrode. Applied to a symmetric supercapacitor systems (SSS) assembled with an rGO-CNT30 electrode and with 1 M Na2SO4 aqueous solution as the electrolyte, the SSS possesses a high energy density of 12.29 W h kg-1 and an outstanding cycling stability, with 91.42% of initial specific capacitance after 18,000 cycles. Results from these electrochemical properties suggest that the rGO-CNT30 nanocomposite electrode is a promising candidate for the development of flexible and lightweight high-performance supercapacitors.

Relationship between non-headache symptoms and right to left shunt in episodic migraine. A single-center cross-sectional study.

The relationship between right to left shunt (RLS) and non-headache symptoms (NHS) in episodic migraine is unknown. This study aimed to investigate the incidence and classification of RLS in episodic migraineurs, calculate the occurrence rate of NHS, and analyze the associations between RLS and NHS. We consecutively recruited 204 episodic migraine patients. Contrast-enhanced transcranial doppler was adopted to screen RLS. Structured questionnaire via face-to-face survey was conducted to collect clinical data. A total of 172 episodic migraineurs were included in the final analysis, of which 20 cases were migraine with aura. The positive rate of RLS was 47.1%, of which 50 cases (29.0%) had small shunt (Grade 1) and 31 cases (18.1%) had mid-large shunt (Grade 2-4). The most common NHS was nausea (115 (66.9%)), followed by headache aggravation with physical activity (96 (55.8%)), dizziness (93 (54.1%)), vomiting (77 (44.8%)) and phonophobia (74 (43.0%)). Yawning was more common in Grade 2-4 group than Grade 0 group (p = 0.012), while no statistical differences among other groups. Grade 2-4 group had a higher rate of headache aggravation with physical activity than grade 0 group (p = 0.008). Binary logistic regression analysis showed that yawning at premonitory phase, headache aggravation with physical activity and cranial autonomic symptoms during attack are independent predictors of RLS. In conclusion, yawning and headache aggravation with physical activity are more common in migraine patients with RLS. Besides aura, particular NHS may also serve as indicators for screening RLS in episodic migraineurs.

Spider-Web-Inspired Stretchable Graphene Woven Fabric for Highly Sensitive, Transparent, Wearable Strain Sensors.

Advanced wearable strain sensors with high sensitivity and stretchability are an essential component of flexible and soft electronic devices. Conventional metal- and semiconductor-based strain sensors are rigid, fragile, and opaque, restricting their applications in wearable electronics. Graphene-based percolative structures possess high flexibility and transparency but lack high sensitivity and stretchability. Inspired by the highly flexible spider web architecture, we propose semitransparent, ultrasensitive, and wearable strain sensors made from an elastomer-filled graphene woven fabric (E-GWF) for monitoring human physiological signals. The highly flexible elastomer microskeleton and the hierarchical structure of a graphene tube offer the strain sensor with both excellent sensing and switching capabilities. Two different types of E-GWF sensors, including freestanding E-GWF and E-GWF/polydimethylsiloxane (PDMS) composites, are developed. When their structure is controlled and optimized, the E-GWF strain sensors simultaneously exhibit extraordinary characteristics, such as a high gauge factor (70 at 10% strain, which ascends to 282 at 20%) in respect to other semitransparent or transparent strain sensors, a broad sensing range up to 30%, and excellent linearity. The E-GWF/PDMS composite sensor shows a unique reversible switching behavior at a high strain level of 30-50%, making it a suitable material for fast and reversible strain switching required in many early warning systems. With a view to real-world applications of these sensors and switches, we demonstrate human motion detection and switch controls of light-emitting-diode lamps and liquid-crystal-display circuits. Their unique structure and capabilities can find a wide range of practical applications, such as health monitoring, medical diagnosis, early warning systems for structural failure, and wearable displays.

Effects of street canyon design on pedestrian thermal comfort in the hot-humid area of China.

The design characteristics of street canyons were investigated in Guangzhou in the hot-humid area of China, and the effects of the design factors and their interactions on pedestrian thermal comfort were studied by numerical simulations. The ENVI-met V4.0 (BASIC) model was validated by field observations and used to simulate the micrometeorological conditions and the standard effective temperature (SET) at pedestrian level of the street canyons for a typical summer day of Guangzhou. The results show that the micrometeorological parameters of mean radiant temperature (MRT) and wind speed play key roles in pedestrian thermal comfort. Street orientation has the largest contribution on SET at pedestrian level, followed by aspect ratio and greenery, while surface albedo and interactions between factors have small contributions. The street canyons oriented southeast-northwest or with a higher aspect ratio provide more shade, higher wind speed, and better thermal comfort conditions for pedestrians. Compared with the east-west-oriented street canyons, the north-south-oriented street canyons have higher MRTs and worse pedestrian thermal comfort due to their wider building spacing along the street. The effects of greenery change with the road width and the time of the day. Street canyon design is recommended to improve pedestrian thermal comfort. This study provides a better understanding of the effects of street canyon design on pedestrian thermal comfort and is a useful guide on urban design for the hot-humid area of China.

Tolerance of glycosylphosphatidylinositol (GPI)-specific phospholipase D overexpression by Chinese hamster ovary cell mutants with aberrant GPI biosynthesis.

Mammalian glycosylphosphatidylinositol (GPI)-specific phospholipase D (GPI-PLD) is capable of releasing GPI-anchored proteins by cleavage of the GPI moiety. A previous study indicated that overexpression of GPI-PLD in mouse RAW 264.7 monocytes/macrophages could be cytotoxic, since survivors of stable transfections had enzymic activity no higher than untransfected cells [Du and Low (2001) Infect. Immun. 69, 3214-3223]. We investigated this phenomenon by transfecting bovine GPI-PLD cDNA stably into Chinese hamster ovary (CHO) cells using a bi-cistronic expression system. The surviving transfectants showed an unchanged cellular level of GPI-PLD, supporting the cytotoxicity hypothesis. However, when using a CHO mutant defective in the second step of GPI biosynthesis as host, the expression level of GPI-PLD in stable transfectants was increased by 2.5-fold compared with untransfected or empty-vector-transfected cells. To identify the mechanism, we studied another CHO cell mutant (G9PLAP.D5), which seems to be defective at a later stage in GPI biosynthesis. In sharp contrast with wild-type cells, GPI-PLD activity in G9PLAP.D5 transfected with bovine GPI-PLD cDNA was 100-fold higher than untransfected or empty-vector-transfected cells. This was accompanied by a significant release of alkaline phosphatase into the medium and a decrease in membrane-associated alkaline phosphatase. Taken together, our results indicate that overexpression of GPI-PLD is lethal to wild-type cells, possibly by catalysing the overproduction of GPI-derived toxic substances. We propose that cells with abnormal GPI biosynthesis/processing can escape the toxic effect of these substances.