Optimization of Mg-Al Layered Double Hydroxide Film Preparation and Corrosion Resistance Study on AZ91D Mg Alloy by Multivariate Polynomial Regression Fitting.

Layered double hydroxide (LDH) films have received extensive attention for their unique physical barrier function and ion exchange properties, which make them promising candidates for corrosion protection of magnesium alloys. In this paper, we used the multiple polynomial regression fitting method to establish a regression equation for the electrochemical corrosion resistance with the reaction temperature (T), pH, and reaction time (t) of the Mg-Al LDH film on the AZ91D magnesium alloy. The goodness of fit, confidence, and residual analyses confirmed the high accuracy of the model equation. According to the calculation using the fmincon function, the best corrosion resistance of the prepared samples could be achieved when the parameters are T = 135 °C, pH = 12.0, and t = 15 h. Then, the experimental results showed that the corrosion current density (Icorr) of the obtained LDH film under the above conditions could be 1.07 × 10-7 A/cm2, approximately 3 orders of magnitude lower than the magnesium alloy substrate, after immersion in a 3.5 wt % NaCl solution for 180 h, the surface structure of the LDH film did not change significantly, and the Icorr was still 2 orders of magnitude higher than that of the magnesium alloy substrate. Hence, a synergistic effect equation for the reaction temperature, pH, and reaction time on the corrosion resistance of the LDH film on a magnesium alloy surface prepared by the hydrothermal method was obtained. Moreover, using this equation, we obtained an LDH film with good corrosion resistance and durability, providing theoretical guidance for optimizing the process of preparing the LDH film by the hydrothermal method in practical applications.

WTAP mediated m6A-modified circ_0056856 contributes to the proliferation, migration, and invasion of IL-22-stimulated human keratinocyte by miR-197-3p/CDK1 axis.

BACKGROUND: Psoriasis is a chronic inflammation-associated skin disorder, and interleukin-22 (IL-22) is involved in psoriasis pathogenesis by boosting the proliferation and migration of keratinocytes. Mounting evidence has shown that circRNAs might play an important role in several aspects of psoriasis. This study is designed to explore the role and mechanism of circ_0056856 in regulating the phenotypes of IL-22-induced keratinocytes (HaCaT cells). METHODS: Circ_0056856, microRNA-197-3p (miR-197-3p), Cyclin-dependent kinase 1 (CDK1), and Wilms tumor 1-associated protein (WTAP) levels were detected using real-time quantitative polymerase chain reaction (RT-qPCR). Cell viability, proliferation, migration, and invasion were analyzed using 3-(4, 5-dimethyl-2-thiazolyl)-2, 5-diphenyl-2-H-tetrazolium bromide (MTT), 5-ethynyl-2'-deoxyuridine (EdU), Wound scratch, and Transwell assays. After being predicted by Circinteractome or TargetScan, binding between miR-197-3p and circ_0056856 or CDK1 was verified by a dual-luciferase reporter assay. CDK1 and WTAP protein levels were determined using Western blot. Interaction between WTAP and circ_0056856 was assessed using methylated RNA immunoprecipitation (MeRIP) assay. RESULTS: Increased circ_0056856, CDK1, and WTAP were observed in psoriasis patients and IL-22-treated HaCaT cells. Moreover, circ_0056856 knockdown might repress IL-22-induced HaCaT cell proliferation, migration, and invasion in vitro. In mechanism, circ_0056856 might function as a sponge of miR-197-3p to modulate CDK1 expression, and WTAP improved circ_0056856 expression via m6A methylation. CONCLUSION: WTAP-guided m6A modified circ_0056856 facilitates IL-22-stimulated HaCaT cell damage through the miR-197-3p/CDK1 axis, which could provide novel insights into psoriasis treatment.

Adalimumab induced exacerbation of psoriasis in patients with combined pemphigus: A case report.

RATIONALE: Psoriasis is an immune-related disease caused by genetic factors, abnormalities in the immune system and environmental factors, while pemphigus is an autoimmune disease caused by the autoimmune system attacking the skin and mucosal tissues. Herein, we aimed to report a rare case of adalimumab induced exacerbation of psoriasis patients with pemphigus. The rare disease causes considerable challenges for clinical diagnosis and treatment. PATIENT CONCERNS: The patient was a 43-year-old man with intermittent erythema and scaling all over the body for more than 20 years, and blisters and vesicles on the trunk and limbs for 1 month. Half a year ago, the patient had blisters on the limbs, and was diagnosed with deciduous pemphigus in a hospital, and the blisters subsided after being given traditional Chinese medicine orally. Half a month ago, the erythema area was enlarged, and adalimumab 80 mg intramuscular injection was given for 1 time after consultation in the hospital. On the following day, the area of erythema and scales was suddenly enlarged obviously compared with the previous 1, and obvious blisters and vesicles appeared on the limbs, neck, and trunk, which were aggravated progressively and accompanied by obvious itching and pain. DIAGNOSES: The patient was diagnosed with psoriasis in patients with combined pemphigus. INTERVENTION: After combined treatment with methylprednisolone and cyclosporine, the skin lesions have basically recovered. OUTCOMES: The skin lesions have basically healed. Follow up for 6 months without recurrence. LESSONS: Methylprednisolone combined with cyclosporine may be an option in treating patients with psoriasis patients with pemphigus.

Preparation of Ag@lignin nanotubes for the development of antimicrobial biodegradable films from corn straw.

Current environmental and energy issues have attracted considerable attention from industries, governments, and academia. Developing alternative diverse petrochemical-based plastics with biodegradable packaging materials from renewable resources is critical for ensuring both sustainability and safety. In this study, biodegradable films are fabricated from corn straw via a facile sol-gel process. Furthermore, these films are imbued with antimicrobial properties by coupling with silver@lignin nanotube hybrid antibacterial agents, formed via the in situ reduction of silver ions into elemental silver by lignin (mild reducing agent), followed by the self-assembly of lignin molecules into nanotubes assisted by an aqueous silver nitrate electrolyte solution. The developed antibacterial corn straw film exhibits strong mechanical and antibacterial properties, with a tensile strength and elongation at break of 68.7 MPa and 11.3 %, respectively, under optimum conditions and antibacterial activity against Escherichia coli and Staphylococcus aureus of 99.9 % and 97.2 %, respectively. The as-prepared corn straw films exhibit high hydrophobicity and ultraviolet resistance. The morphology, structure, and thermal properties of the corn straw films were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, and thermogravimetric analysis. This study provides a straw-based biodegradable packaging film with antimicrobial properties.

Bioinformatics and Systems Biology Approach to Identify the Pathogenetic Link Between Psoriasis and Cardiovascular Disease.

Objective: This study aimed to identify hub genes and common pathways shared between psoriasis and cardiovascular disease (CVD) using bioinformatics analysis and predict the transcription factors (TFs) of hub genes. Methods: GSE133555 data from the Gene Expression Omnibus (GEO) database were used to identify differentially expressed genes (DEGs) between involved and uninvolved skin lesions in psoriasis, employing the limma package in R. Additionally, CVD-related genes were obtained from the GeneCards database. The intersection of DEGs and CVD-related genes yielded CVD-DEGs. Gene Ontology and signaling pathway analyses were performed using the clusterProfiler package in R. Hub genes were identified by intersecting six algorithms in the CytoHubba plugin of Cytoscape. To identify potential biomarkers, the GSE14905 dataset was subjected to receiver operating characteristic analysis, resulting in the identification of eight central hub genes. Finally, the NetworkAnalyst web tool was used to identify the TFs of the eight hub genes. Results: We identified 92 significant DEGs out of 1825 CVD-related genes in psoriasis obtained from the GSE13355 and GeneCard data. Functional enrichment analysis revealed the involvement of these genes in various signaling pathways, including the interleukin-17 signaling, tumor necrosis factor signaling, lipid and atherosclerosis, chemokine signaling, and cytokine signaling pathways in the immune system. The eight hub genes identified included interleukin-1 beta, C-X-C motif chemokine ligand 8, signal transducer and activator of transcription 3, C-C motif chemokine ligand 2, arginase 1, C-X-C motif chemokine receptor 4, cyclin D1, and matrix metallopeptidase 9, with forkhead box C1 also identified as an associated TF of these genes. These hub genes and TF may act as key regulators in the context of CVD. Conclusion: This study identified several hub genes and signaling pathways associated with both CVD and psoriasis. These findings lay the groundwork for potential therapeutic interventions for patients with psoriasis affected by CVD.

Preparation of Bio-Foam Material from Steam-Exploded Corn Straw by In Situ Esterification Modification.

In this work, we engineered a corn-straw-based bio-foam material under the inspiration of the intrinsic morphology of the corn stem. The explosion pretreatment was applied to obtain a fibrillated cellulose starting material rich in lignin. The in situ esterification of cellulose was adopted to improve the cross-linking network of the as-developed foam bio-material. The esterification of lignin was observed in the same procedure, which provides a better cross-linking interaction. The esterified corn-straw-derived bio-foam material showed excellent elastic resilience performance with an elastic recovery ratio of 83% and an elastic modulus of 20 kPa. Meanwhile, with surface modification by hexachlorocyclotriphosphazene-functionalized lignin as the flame retardant (Lig-HCCP), the as-obtained bio-foam material demonstrated quite a good flame retardancy (with 27.3% of the LOI), as well as a heat insulation property. The corn-straw-derived bio-foam material is prospected to be a potential substitution packaging material for widely used petroleum-derived products. This work provides a new value-added application of the abundant agricultural straw biomass resources.

The Value of 18F-FDG PET/CT in the Diagnosis of Tuberculous Pleurisy and in the Differential Diagnosis between Tuberculous Pleurisy and Pleural Metastasis from Lung Adenocarcinoma.

Objectives: This study aims to investigate the diagnostic value of 18F-FDG PET/CT in tuberculous pleurisy (TBP) and the differential diagnostic value of 18F-FDG PET/CT between TBP and pleural metastasis from lung adenocarcinoma (PMLAC). Materials and Methods: The features of pleura on PET and hybrid CT were retrospectively studied in 20 patients with TBP and 32 patients with PMLAC. The ROC curve was used to evaluate the diagnostic effectiveness of these indices for TBP and PMLAC, and binary logistic regression analysis was conducted to identify independent predictors of TBP and PMLAC. Results: There were significant differences in pleural 18F-FDG uptake pattern on PET (P=0.001), pleural morphology pattern on CT (P=0.002), the maximum diameter of the pleural nodule (P=0.001), and interlobular fissure nodule (P=0.001) between TBP and PMLAC groups. The diffused pleural FDG uptake type on PET (odds ratio (OR) = 6.0, 95% CI 2.216-16.248, P=0.001) and the lamellar pleural thickening type on CT (OR = 4.4, 95% CI 2.536-7.635, P=0.001) were independent predictors of TBP, with 60% and 55% sensitivity, 96.6% and 90.6% specificity, and 82.7% and 77.0% accuracy. The combined diagnostic sensitivity, specificity, and accuracy for TBP were 70%, 87.5%, and 80.8%. The mixed pleural FDG uptake type on PET (OR = 5.106, 95% CI 2.024-12.879, P=0.001), the mixed pleural thickening type on CT (OR = 2.289, 95% CI 1.442-3.634, P=0.001), and the maximum diameter of the pleural nodule (OR = 1.027, 95% CI 1.012-1.042, P=0.001) were independent predictors of PMLAC, with 78.1%, 71.9%, and 87.5% sensitivity, 85%, 80%, and 85% specificity, and 80.8%, 75%, and 86.5% accuracy. The combined diagnostic sensitivity, specificity, and accuracy for PMLAC were 96.9%, 85%, and 90.4%. Conclusions: 18F-FDG PET/CT is of great clinical value in the diagnosis of TBP and in the differential diagnosis between TBP and PMLAC.

Experimental Study and Theoretical Analysis on the Compression-Shear Multiaxial Mechanical Properties of Recycled Concrete.

Recycled concrete, which is formed by replacing coarse aggregates in ordinary concrete with recycled aggregates (RA), is of great significance for the secondary utilization of waste building resources. In civil engineering, concrete structures are sometimes subjected to a compression-shear multiaxial stress state. Therefore, research on the compression-shear multiaxial mechanical properties of recycled concrete plays an important role in engineering practice. To explore the effect of RA replacement rate on the compression-shear properties of recycled concrete, an experimental study was carried out using a compression-shear testing machine and considering five RA replacement rates and five axial compression ratios. Consequently, the failure modes and mechanical property parameters under different working conditions were obtained and were used to analyze the effects of RA replacement rate and axial compression ratio on the shear stress of recycled concrete. Eventually, the following conclusions were reached: With the growth of axial compression ratio, the shear cracks exhibit a developing trend along the oblique direction, and the friction traces on the shear surface are gradually deepened. As the replacement rate increases, the number of shear cracks is gradually increased, accompanied by increasing broken fragments falling off from the shear interface. Since the action of the axial compression ratio can effectively improve the mechanical bite force and friction on the shear interface of recycled concrete, as the axial compression ratio increases, the shear stress is gradually increased. On the other hand, due to the initial damage of RA and its weak adhesion with cement mortar, the shear stress is gradually reduced with the increase of RA replacement rate. Meanwhile, the increase in shear stress shows a gradually decreasing trend with the growth of axial compression ratio. Specifically, for the RA replacement rates of 0% and 100%, the shear stress increased by 4.06 times and 3.21 times, respectively, under the influence of the axial compression ratio. Under different axial compression ratios, the shear stress was reduced by 43~46%, due to the increase of RA replacement rate. In addition, based on the octahedral stress space and the principal stress space, a compression-shear multiaxial failure criterion and shear stress calculation model for recycled concrete were proposed, by considering the effect of the RA replacement rate. The outcomes of this research are of great significance for engineering applications and the development of recycled concrete.

Research on Dynamic Compressive Performance and Failure Mechanism Analysis of Concrete after High Temperature and Rapid Cooling.

To investigate the dynamic compressive properties of concrete after high temperature and rapid cooling, an experimental study was carried out by considering five temperatures and four strain rates. The coupling effect of high temperature and strain rate on concrete damage morphology and mechanical parameters was comparatively analyzed. The main conclusions are as follows: the compressive damage morphology of concrete is affected by strain rate development trends of significant variability under different temperature conditions. As the strain rate increases, the compressive stress and elastic modulus of concrete are gradually increased. As the temperature increases, the increase in compressive stress is gradually reduced by the strain rate. For the temperatures of 20 °C and 800 °C, the increase in compressive stress by the strain rate is 38.69% and 7.78%, respectively. Meanwhile, SEM and CT scanning technology were applied to examine the mechanism of the effect of high temperature and strain rate on the mechanical properties of concrete from the microscopic perspective, and the corresponding constitutive model was proposed.

Dual Targeting of Cancer Cells and MMPs with Self-Assembly Hybrid Nanoparticles for Combination Therapy in Combating Cancer.

The co-delivery of chemotherapeutic agents and immune modulators to their targets remains to be a great challenge for nanocarriers. Here, we developed a hybrid thermosensitive nanoparticle (TMNP) which could co-deliver paclitaxel-loaded transferrin (PTX@TF) and marimastat-loaded thermosensitive liposomes (MMST/LTSLs) for the dual targeting of cancer cells and the microenvironment. TMNPs could rapidly release the two payloads triggered by the hyperthermia treatment at the site of tumor. The released PTX@TF entered cancer cells via transferrin-receptor-mediated endocytosis and inhibited the survival of tumor cells. MMST was intelligently employed as an immunomodulator to improve immunotherapy by inhibiting matrix metalloproteinases to reduce chemokine degradation and recruit T cells. The TMNPs promoted the tumor infiltration of CD3+ T cells by 2-fold, including memory/effector CD8+ T cells (4.2-fold) and CD4+ (1.7-fold), but not regulatory T cells. Our in vivo anti-tumor experiment suggested that TMNPs possessed the highest tumor growth inhibitory rate (80.86%) compared with the control group. We demonstrated that the nanoplatform could effectively inhibit the growth of tumors and enhance T cell recruitment through the co-delivery of paclitaxel and marimastat, which could be a promising strategy for the combination of chemotherapy and immunotherapy for cancer treatment.

Cytosolic delivery of the immunological adjuvant Poly I:C and cytotoxic drug crystals via a carrier-free strategy significantly amplifies immune response.

Co-delivery of chemotherapeutics and immunostimulant or chemoimmunotherapy is an emerging strategy in cancer therapy. The precise control of the targeting and release of agents is critical in this methodology. This article proposes the asynchronous release of the chemotherapeutic agents and immunostimulants to realize the synergistic effect between chemotherapy and immunotherapy. To obtain a proof-of-concept, a co-delivery system was prepared via a drug-delivering-drug (DDD) strategy for cytosolic co-delivery of Poly I:C, a synthetic dsRNA analog to activate RIG-I signaling, and PTX, a commonly used chemotherapeutics, in which pure PTX nanorods were sequentially coated with Poly I:C and mannuronic acid via stimulating the RIG-I signaling axis. The co-delivery system with a diameter of 200 nm enables profound immunogenicity of cancer cells, exhibiting increased secretion of cytokines and chemokines, pronounced immune response in vivo, and significant inhibition of tumor growth. Also, we found that intracellularly sustained release of cytotoxic agents could elicit the immunogenicity of cancer cells. Overall, the intracellular asynchronous release of chemotherapeutics and immunomodulators is a promising strategy to promote the immunogenicity of cancer cells and augment the antitumor immune response.

Association of Evaluated Glomerular Filtration Rate and Incident Diabetes Mellitus: A Secondary Retrospective Analysis Based on a Chinese Cohort Study.

BACKGROUND: Previous studies have revealed that chronic kidney disease (CKD) is a significant risk factor for insulin resistance and diabetes. However, few studies are on the association between estimated glomerular filtration rate (eGFR) and incident diabetes, especially in the Chinese population with eGFR>60 mL/min·1.73 m2. This study explored the relationship between eGFR and incident diabetes in a large cohort in the Chinese community. METHODS: This study was a retrospective cohort study. A total of 1,99,435 adults from Rich Healthcare Group in China were studied, including all medical records for participants who received a health check from 2010 to 2016. The target-independent and target-dependent variables were eGFR measured at baseline, and incident diabetes mellitus appeared during the follow-up. After testing the proportion hypothesis, Cox proportional hazards regression was used to investigate the association between eGFR and incident diabetes. A Cox proportional hazards regression with cubic spline functions and smooth curve fitting (the cubic spline smoothing) was used to identify non-linear relationships between eGFR and the risk of diabetes. Additionally, we also performed subgroup analysis and a series sensitivity analysis. It was stated that the data had been uploaded to the DATADRYAD website. RESULT: After adjusting gender, body mass index (BMI), systolic blood pressure (SBP), diastolic blood pressure (DBP), fasting plasma glucose (FPG), total cholesterol (TC), low-density lipoprotein cholesterol (LDL-C), high-density lipoprotein cholesterol (HDL-C), triglyceride (TG), alanine aminotransferase (ALT), aspartate aminotransferase (AST), smoking and drinking status, and family history of diabetes, the result showed that eGFR was negatively associated with incident diabetes [HR = 0.986, 95% CI (0.984, 0.988)]. A non-linear relationship was detected between eGFR and incident diabetes, with an inflection point of eGFR of 98.034 mL/min·1.73 m2. The effect sizes and the confidence intervals (Cis) on the left and right sides of the inflection point were 0.998 (0.993, 1.003) and 0.976 (0.972, 0.980), respectively. Subgroup analysis showed a stronger association in the population with FPG <6.1 mmol/L, BMI <24 kg/m2, SBP <140 mmHg, DBP <90 mmHg and family history without diabetes. The same trend was also seen in women and the population who never smoke. CONCLUSION: Estimated glomerular filtration rate is independently associated with incident diabetes. The relationship between eGFR and incident diabetes is also non-linear. eGFR is strongly related to incident diabetes when eGFR was above 98.034 mL/min·1.73 m2.

Different Dimensions of g-C3N4 Nanomaterials on Sulphur Cathode for Lithium Sulfur Batteries.

Lithium sulfur batteries (Li-S) have been deemed to be the promising energy-storage systems. Nevertheless, the shuttle effect caused by diffusion of polysulfides limit their application. In this work, the different dimensions of g-C3N4 nanomaterials (2D g-C3N4 nanosheets and 3D g-C3N4 nanomesh) were doped in S electrode. Because of the large specific surface area of 3D g-C3N4 nanomesh and strong chemical adsorption of polysulfides can provide better effect for inhibition of shuttling effect and its proper electron passage make electrochemical kinetics of lithium-sulfur battery enhanced. The discharge specific capacity of the 3D g-C3N4 battery is up to 731 mAh/g and longer cycling performance with 540 mAh/g after 180 cycles. This experiment paves the way forward for the application of g-C3N4 on Li-S batteries.

Vibrational (FT-IR, Raman) analysis of tea catechins based on both theoretical calculations and experiments.

Structural investigations, based on density functional theory (DFT) calculations, are performed on tea catechins, including 4-aminobutyric acid (GABA), L-theanine (Thea), caffeine (CAF), theobromine (TB), theophylline (TP), catechin (C), epicatechin (EC), gallocatechin (GC), epigallocatechin (EGC), catechin gallate (CG), epicatechin gallate (ECG), gallocatechin gallate (GCG) and epigallocatechin gallate (EGCG). With an identified lowest energy conformer of investigated molecules, FTIR and FT-Raman spectra have been assigned according to DFT calculations in the way of B3LYP/6-31 + G (d, p). Normal spectra of these catechin powders are also measured by Raman spectrometers. There is a kind of everlasting correlation between experimental results and theoretical data. And our research has also obtained a clear evidence for reliable assignments of vibrational bands, bringing great feasibility to the rapid tea catechin detection.

Facile in-situ growth of Ag/TiO2 nanoparticles on polydopamine modified bamboo with excellent mildew-proofing.

Bamboo with the outstanding properties, such as good mechanical strength, fast growth rate and low growth cost, is considered as one of utilitarian structural nature materials. But bamboo is easy to get mildewed resulting in disfiguration and fungi corrosion. In this work, a facile method was developed to improve the mildew-proofing capability of bamboo. Mussel-inspired polydopamine (PDA) with biomimetic adhesion function and highly active functional groups was employed to immobilize highly-dispersed Ag and TiO2 nanoparticles on the surface of bamboo via an in-situ growth method. Integrating the uniform PDA coating, photocatalytic function of TiO2 nanoparticles and bactericidal role of Ag nanoparticles, the mildew-proofing capability of bamboo is enhanced significantly. The results show a non-covalent interaction is more likely to account for the binding mechanism of PDA to bamboo. And the prepared bamboo samples show good photocatalytic performance and have excellent resistance leachability. Meanwhile, the mildew-proofing property of prepared bamboo sample was greatly improved.

Drug Nanorod-Mediated Intracellular Delivery of microRNA-101 for Self-sensitization via Autophagy Inhibition.

Autophagy is closely related to the drug resistance and metastasis in cancer therapy. Nanoparticle-mediated co-delivery of combinatorial therapy with small-molecular drugs and nucleic acids is promising to address drug resistance. Here, a drug-delivering-drug (DDD) platform consisting of anti-tumor-drug nanorods as a vehicle for cytosol delivery of nucleic acid (miR-101) with potent autophagic-inhibition activity is reported for combinatorial therapy. The developed 180-nm nanoplatform, with total drug loading of up to 66%, delivers miR-101 to cancer cells, with threefold increase in intracellular level compared to conventional gene carriers and inhibits the autophagy significantly, along with above twofold reduction in LC3II mRNA and approximately fivefold increase in p62 mRNA over the control demonstrated in the results in vivo. And in turn, the delivery of miR-101 potentiates the drug's ability to kill cancer cells, with a threefold increase in apoptosis over that of chemotherapy alone. The anti-tumor study in vivo indicates the combined therapy that enables a reduction of 80% in tumor volume and > twofold increase in apoptosis than of the single-drug strategy. In summary, via the carrier-free strategy of DDD, this work provides a delivery platform that can be easily customized to overcome drug resistance and facilitates the delivery of combined therapy of small-molecular drugs and nucleic acids.

Enhanced Flexibility and Microwave Absorption Properties of HfC/SiC Nanofiber Mats.

Hafnium carbide (HfC) phase, with a high melting point, excellent strength, and high electrical conductivity, could be a suitable addition to enhance the microwave absorption properties of one-dimensional silicon carbide (SiC) nanomaterials without sacrificing its high-temperature thermal stability. In the present work, HfC/SiC hybrid nanofiber mats with different HfC loading contents are fabricated by electrospinning and high-temperature pyrolysis. HfC hybrids with sizes of 5-10 nm are embedded in the SiC nanofibers. As the HfC content increases from 0 to 6.3 wt %, the average diameter of the fibers drops from 2.62 µm to 260 nm. Meanwhile, the electrical conductivity rises from 7.9 × 10-8 to 4.2 × 10-5 S/cm. Moreover, the flexibility of the nanofiber mats is also greatly improved, according to a 200-times 180° bending test. Furthermore, compared with pure SiC fiber mats, the HfC/SiC nanofiber mats possess much larger dielectric loss because of higher electrical conductivity. At the optimal HfC content of 2.5 wt %, the HfC/SiC nanofibers/silicon resin composite (10 wt %) exhibits a minimal reflection loss (RL) of -33.9 dB at 12.8 GHz and a 3 mm thickness with a broad effective absorption bandwidth (RL < -10 dB) of 7.4 GHz. The above results prove that introducing HfC into SiC nanofiber mats is an effective way to enhance their flexibility, dielectric properties, and microwave absorption performance.

Drug-delivering-drug platform-mediated potent protein therapeutics via a non-endo-lysosomal route.

Protein therapeutics is playing an increasingly critical role in treatment of human diseases. However, current vectors are captured by the digestive endo-lysosomal system, which results in an extremely low fraction (<2%) of protein being released in the cytoplasm. This paper reports a drug-delivering-drug platform (HA-PNPplex, 200 nm) for potent intracellular delivery of protein and combined treatment of cancer. Methods: The platform was prepared by loading functional protein on pure drug nanoparticles (PNPs) followed by hyaluronic acid coating and was characterized by dynamic light scattering, transmission electron microscopy, and gel electrophoresis. In vitro, cellular uptake, trafficking, and cytotoxicity were evaluated by flow cytometry and confocal laser microscopy. Protein expression was assayed by western blot. In vivo, blood circulation and biodistribution were studied using a fluorescence imaging system, antitumor efficacy was assessed in a caspase 3-deficient tumor model, and biocompatibility was determined by comparison of hemolytic activity and proinflammatory cytokines and tissue histology. Results: HA-PNPplex delivered the functional protein, caspase 3, to cells via bypassing endo-lysosomes and raised the caspase-3 level 6.5-fold in caspase 3-deficient cells. Promoted tumor accumulation (1.5-fold) and penetration were exhibited, demonstrating a high tumor-targeting ability of HA-PNPplex. HA-PNPplex rendered a 7-fold increase in caspase 3 in tumor and allowed for a 100% tumor growth inhibition and >60% apoptosis, implying significant antitumor activities. Conclusions: This platform gains cellular entry without entrapment in the endo-lysosomes and enables efficient intracellular protein delivery and resultant profound cancer treatment. This platform, with extremely high drug-loading, is a valuable platform for combined cancer therapy with small-molecule drugs and proteins. More importantly, this work offers a robust and safe approach for protein therapeutics and intracellular delivery of other functional peptides, as well as gene-based therapy.

Three-way DNA junction based platform for ultra-sensitive fluorometric detection of multiple metal ions as exemplified for Cu(II), Mg(II) and Pb(II).

A DNA-based fluorometric method is described for simultaneous determination of multiple metal ions. It is based on recycling cleavage of hairpins by using a three-way DNA junction structure. Three DNA sequences containing a binding region and an enzyme-strand (E-DNA) region are hybridized to form a three-way DNA junction. The enzyme strand regions at the end of the DNA sequence binds to the substrate sequence (S-DNA) at the loop of the hairpin to form typical DNAzyme structures. In the presence of analyte metal ions, the DNAzyme structure thus formed cleaves the loop of hairpins. This is accompanied by a release of fluorescently labeled DNA fragments and by quenching of fluorescence. The detection limits are 35 pM for Cu(II), 2 nM for Mg(II), and 8 pM for Pb(II). This method was successfully applied to the simultaneous determination of these ions in spiked human serum. Graphical abstract Schematic presentation of the recycling cleavage of hairpins by using a three-way DNA junction structure. It causes a release of fluorescently labeled DNA fragments and quenching of fluorescence. It was successfully applied to the simultaneous determination of Cu(II), Mg(II) and Pb(II) in spiked human serum.