Biomechanical Effect of Different Posterior Fixation Techniques on Stability and Adjacent Segment Degeneration in Treating Thoracolumbar Burst Fracture With Osteoporosis: A Finite Element Analysis.

STUDY DESIGN: Finite element analysis. OBJECTIVE: To investigate the biomechanical effect of four posterior fixation techniques on stability and adjacent segment degeneration in treating thoracolumbar burst fractures with osteoporosis. SUMMARY OF BACKGROUND DATA: In terms of stability and adjacent segment degeneration, there remains no consensus or guidelines on the optimal technique for the treatment of thoracolumbar burst fractures in patients with osteoporosis. MATERIALS AND METHODS: Images of CT scans were imported into MIMICS and further processed by Geomagic to build three-dimensional models of the T10-L5 region. A v-shaped osteotomy was performed on the L1 vertebral body to simulate a burst fracture in the setting of osteoporosis. Subsequently, four fixation techniques were designed using SolidWorks software. Range of motion (ROM) of the global spine, ROM distribution, ROM of adjacent segment, Von Mises stress on adjacent intervertebral disks, and facet joints were analyzed. RESULTS: Among the four groups, the cortical bone screw fixation (CBT) showed the highest global ROM at 1.86°, while long-segmented pedicle screw fixation (LSPS) had the lowest global ROM at 1.25°. The LSPS had the smallest percentage of ROM of fractured vertebral body to fixed segment at 75.04%, suggesting the highest stability after fixation. The maximum ROM of the adjacent segment was observed in the CBT at 1.32°, while the LSPS exhibited the smallest at 0.89°. However, the LSPS group experienced larger maximum stress on the adjacent intervertebral disks (9.60 MPa) and facet joints (3.36 MPa), indicating an increasing risk of adjacent segment disease. CONCLUSION: LSPS provided the greatest stability, while CBT provided the smallest amount of stability. However, the elevated stress on adjacent intervertebral disks and facet joints after LSPS fixation increased the possibility of adjacent segment degeneration. Cement-augmented pedicle screw fixation (CAPS) and combined cortical bone screw and pedicle screw fixation (CBT-PS) demonstrated significant biomechanical advantages in providing moderate fixation strength while reducing stress on the intervertebral disks and facet joints.

Demonstrating the effectiveness of intra-articular prolotherapy combined with peri-articular perineural injection in knee osteoarthritis: a randomized controlled trial.

BACKGROUND: This study aimed to compare the efficacy of intra-articular prolotherapy (IG) combined with peri-articular perineural injection (PG) in the management of knee osteoarthritis (KOA). METHODS: A total of 60 patients with the diagnosis of KOA were included in this double-blinded randomized controlled clinical trials. The inclusion criteria were as follow: (1) 48-80 years old; (2) the diagnose of KOA; (3) the grade 2 and 3 of the Kellgern-Lawrence grading scale; (4) the pain, crepitation, and knee joint stiffness continuing for 3 months at least. The main exclusion criteria were as follow: (1) any infection involving the knee skin; (2) history of any Influencing factors of disease. All patients were divided into three groups and received either IG, PG and I + PG under the ultrasound guidance and the 2, 4 and 8 weeks follow-up data of patients were available. (IG n = 20 or PG n = 20, I + PG n = 20). Visual Analogue Scale (VAS), The Western Ontario McMaster University Osteoarthritis Index (WOMAC) and the pressure pain threshold (PPT) were used as outcome measures at baseline, 2, 4 and 8 weeks. RESULTS: There were no statistically significant differences in terms of age, sex, BMI, duration of current condition and baseline assessments of pain intensity, WOMAC scores and PPT. After treatment, the improvement of VAS activity, WOMAC and PPT values was showed compared with pre-treatment in all groups (p < 0.05). At 4 and 8 weeks after treatment, the VAS and WOMAC scores of the I + PG were significantly lower than those of the PG or IG, and the difference was statistically significant (p < 0.05). The PPT values of PG and I + PG were significantly improved compared to IG at 2, 4, and 8 weeks after treatment. CONCLUSION: The ultrasound guided I + PG of 5% glucose seem to be more effective to alleviate pain and improve knee joint function than single therapy in short term. Clinical rehabilitators could clinically try this combination of I + PG to improve clinical symptoms in patients with KOA.

The retropharyngeal reduction plate for atlantoaxial dislocation: a finite element analysis.

Objective: To investigate the biomechanical properties of the retropharyngeal reduction plate by comparing the traditional posterior pedicle screw-rod fixation by finite element analysis. Methods: Two three-dimensional finite element digital models of the retropharyngeal reduction plate and posterior pedicle screw-rod fixation were constructed and validated based on the DICOM (Digital Imaging and Communications in Medicine) data from C1 to C4. The biomechanical finite element analysis values of two internal fixations were measured and calculated under different conditions, including flexion, extension, bending, and rotation. Results: In addition to the backward extension, there was no significant difference in the maximum von Mises stress between the retropharyngeal reduction plate and posterior pedicle screw fixation under other movement conditions. The retropharyngeal reduction plate has a more uniform distribution under different conditions, such as flexion, extension, bending, and rotation. The stress tolerance of the two internal fixations was basically consistent in flexion, extension, left bending, and right bending. Conclusion: The retropharyngeal reduction plate has a relatively good biomechanical stability without obvious stress concentration under different movement conditions. It shows potential as a fixation option for the treatment of atlantoaxial dislocation.

Repetitive strikes loading organ culture model to investigate the biological and biomechanical responses of the intervertebral disc.

Background: Disc degeneration is associated with repetitive violent injuries. This study aims to explore the impact of repetitive strikes loading on the biology and biomechanics of intervertebral discs (IVDs) using an organ culture model. Methods: IVDs from the bovine tail were isolated and cultured in a bioreactor, with exposure to various loading conditions. The control group was subjected to physiological loading, while the model group was exposed to either one strike loading (compression at 38% of IVD height) or repetitive one strike loading (compression at 38% of IVD height). Disc height and dynamic compressive stiffness were measured after overnight swelling and loading. Furthermore, histological morphology, cell viability, and gene expression were analyzed on Day 32. Glycosaminoglycan (GAG) and nitric oxide (NO) release in conditioned medium were also analyzed. Results: The repetitive one strike group exhibited early disc degeneration, characterized by decreased dynamic compression stiffness, the presence of annulus fibrosus clefts, and degradation of the extracellular matrix. Additionally, this group demonstrated significantly higher levels of cell death (p < 0.05) and glycosaminoglycan (GAG) release (p < 0.05) compared to the control group. Furthermore, upregulation of MMP1, MMP13, and ADAMTS5 was observed in both nucleus pulposus (NP) and annulus fibrosus (AF) tissues of the repetitive one strike group (p < 0.05). The one strike group exhibited annulus fibrosus clefts but showed no gene expression changes compared to the control group. Conclusions: This study shows that repetitive violent injuries lead to the degeneration of a healthy bovine IVDs, thereby providing new insights into early-stage disc degeneration.

Nomogram for predicting venous thromboembolism after spinal surgery.

PURPOSE: This study aimed to establish a nomogram to predict the risk of venous thromboembolism (VTE), identifying potential risk factors, and providing theoretical basis for prevention of VTE after spinal surgery. METHODS: A retrospective analysis was conducted on 2754 patients who underwent spinal surgery. The general characteristics of the training group were initially screened using univariate logistic analysis, and the LASSO method was used for optimal prediction. Subsequently, multivariate logistic regression analysis was performed to identify independent risk factors for postoperative VTE in the training group, and a nomogram for predict risk of VTE was established. The discrimination, calibration, and clinical usefulness of the nomogram were separately evaluated using the C-index, receiver operating characteristic curve, calibration plot and clinical decision curve, and was validated using data from the validation group finally. RESULTS: Multivariate logistic regression analysis identified 10 independent risk factors for VTE after spinal surgery. A nomogram was established based on these independent risk factors. The C-index for the training and validation groups indicating high accuracy and stability of the model. The area under the receiver operating characteristic curve indicating excellent discrimination ability; the calibration curves showed outstanding calibration for both the training and validation groups. Decision curve analysis showed the clinical net benefit of using the nomogram could be maximized in the probability threshold range of 0.01-1. CONCLUSION: Patients undergoing spinal surgery with elevated D-dimer levels, prolonger surgical, and cervical surgery have higher risk of VTE. The nomogram can provide a theoretical basis for clinicians to prevent VTE.

Biomechanical evaluation of different posterior fixation techniques for treating thoracolumbar burst fractures of osteoporosis old patients: a finite element analysis.

Objective: To investigate the biomechanical characteristics of different posterior fixation techniques in treatment of osteoporotic thoracolumbar burst fractures by finite element analysis. Methods: The Dicom format images of T10-L5 segments were obtained from CT scanning of a volunteer, and transferred to the Geomagic Studio software, which was used to build digital models. L1 osteoporotic burst fracture and different posterior fixation techniques were simulated by SolidWorks software. The data of ROM, the maximum displacement of fixed segment, ROM of fractured L1 vertebrae, the stress on the screws and rods as well as on fractured L1 vertebrae under different movement conditions were collected and analysed by finite element analysis. Results: Among the four groups, the largest ROM of fixed segment, the maximum displacement of fixed segment and ROM of fractured vertebrae occurred in CBT, and the corresponding data was 1.3°, 2.57 mm and 1.37°, respectively. While the smallest ROM of fixed segment, the maximum displacement of fixed segment and ROM of fractured vertebrae was found in LSPS, and the corresponding data was 0.92°, 2.46 mm and 0.89°, respectively. The largest stress of screws was 390.97 Mpa, appeared in CBT, and the largest stress of rods was 84.68 MPa, appeared in LSPS. The stress concentrated at the junction area between the root screws and rods. The maximum stress on fractured vertebrae was 93.25 MPa, appeared in CBT and the minimum stress was 56.68 MPa, appeared in CAPS. And the stress of fractured vertebrae concentrated in the middle and posterior column of the fixed segment, especially in the posterior edge of the superior endplate. Conclusion: In this study, long-segment posterior fixation (LSPF) provided with the greatest stability of fixed segment after fixation, while cortical bone screw fixation (CBT) provided with the smallest stability. Cement-augmented pedicle screw-rod fixation (CAPS) and combined using cortical bone screw and pedicle screw fixation (CBT-PS) provided with the moderate stability. CBT-PS exhibited superiority in resistance of rotational torsion for using multiple connecting rods. CAPS and CBT-PS maybe biomechanically superior options for the surgical treatment of burst TL fractures in osteoporotic patients.

Research Progress on Microbial Community Succession in the Postmortem Interval Estimation.

The postmortem interval (PMI) estimation is a key and difficult point in the practice of forensic medicine, and forensic scientists at home and abroad have been searching for objective, quantifiable and accurate methods of PMI estimation. With the development and combination of high-throughput sequencing technology and artificial intelligence technology, the establishment of PMI model based on the succession of the microbial community on corpses has become a research focus in the field of forensic medicine. This paper reviews the technical methods, research applications and influencing factors of microbial community in PMI estimation explored by using high-throughput sequencing technology, to provide a reference for the related research on the use of microbial community to estimate PMI.

Diatoms pass through the gastrointestinal barrier and lead to false-positive: an animal experiment.

The diatom test has been used by forensic pathologist as standard for drowning, but the occurrence of false-positive results (presence of diatoms found in the tissues of subjects who died from causes other than drowning) draws criticism regarding the specificity of the test. Diatoms within food or water can be ingested through the gastrointestinal tract. However, the mechanisms of how the diatoms reach distant organs such as the lung, liver, and kidney have not been studied. In this article, we simulated the process of diatoms entering the gastrointestinal tract using gastric lavage on experimental rabbits. Diatoms are detected in lymph from a lymphatic vessel at the root of the mesentery, portal vein blood, aortic blood, lung, liver, and kidney samples in the gavage group. Of diatoms, 76.24% were the centric diatom, 99.86% of diatoms have a maximum size of less than 50 µm, and most of diatoms concentrate in the lung. Our study provided the evidence supporting the theory that the diatoms could pass through the gastrointestinal barrier and reach the rabbits' other internal organs. The diatoms could reach internal organs through the portal vein and lymphatic vessel at the root of the mesentery. This provides us new insight into our understanding of false-positive diatom test in forensic pathology.

Dual-Nozzle 3D Printed Nano-Hydroxyapatite Scaffold Loaded with Vancomycin Sustained-Release Microspheres for Enhancing Bone Regeneration.

Background: Successful treatment of infectious bone defect remains a major challenge in the orthopaedic field. At present, the conventional treatment for infectious bone defects is surgical debridement and long-term systemic antibiotic use. It is necessary to develop a new strategy to achieve effective bone regeneration and local anti-infection for infectious bone defects. Methods: Firstly, vancomycin / poly (lactic acid-glycolic acid) sustained release microspheres (VAN/PLGA-MS) were prepared. Then, through the dual-nozzle 3D printing technology, VAN/PLGA-MS was uniformly loaded into the pores of nano-hydroxyapatite (n-HA) and polylactic acid (PLA) scaffolds printed in a certain proportion, and a composite scaffold (VAN/MS-PLA/n-HA) was designed, which can not only promote bone repair but also resist local infection. Finally, the performance of the composite scaffold was evaluated by in vivo and in vitro biological evaluation. Results: The in vitro release test of microspheres showed that the release of VAN/PLGA-MS was relatively stable from the second day, and the average daily release concentration was about 15.75 µg/mL, which was higher than the minimum concentration specified in the guidelines. The bacteriostatic test in vitro showed that VAN/PLGA-MS had obvious inhibitory effect on Staphylococcus aureus ATCC-29213. Biological evaluation of VAN/MS-PLA/n-HA scaffolds in vitro showed that it can promote the proliferation of adipose stem cells. In vivo biological evaluation showed that VAN/MS-PLA/n-HA scaffold could significantly promote bone regeneration. Conclusion: Our research shows that VAN/MS-PLA/n-HA scaffolds have satisfying biomechanical properties, effectively inhibit the growth of Staphylococcus aureus, with good biocompatibility, and effectiveness on repairing bone defects. The VAN/MS-PLA/n-HA scaffold provide the clinic with an application prospect in bone tissue engineering.

Microbial community analyses provide a differential diagnosis for the antemortem and postmortem injury of decayed cadaver: An animal model.

Differentiating antemortem injury from postmortem injury of decayed cadavers is one of the difficult issues in forensic science. Forensic pathologists identify antemortem injury according to the macroscopic and microscopic vital reactions taken place after being injured. However, the decomposition would render those vital reactions ineffective. Microbiomes have been widely used in forensic science due to their succession with time and sensitivity to vary of environment. In this study, microbiomes were introduced to determine whether the bacterial communities can be used to distinguish between the ante- and postmortem injuries through an animal experiment. Our findings showed that the differences of bacterial community were increasingly apparent from the 6th to 9th day after the wound created when the types of wounds were unidentified by morphological examination due to decomposition. The biomarkers at the genus level could effectively distinguish between injury types, Among them, Enterococcus and Enterobacter were only observed in the antemortem injured group, while Staphylococcus and Acinetobacter were only in the postmortem injured group. It is possible to tell whether cadaveric injuries developed before or after death by detecting differences in the bacterial communities of putrefying wounds. This study provides a new perspective for the differences between ante- and postmortem injuries and provides a promising method for us to identify the ante- and postmortem wounds, especially in decomposed cadavers.

An improved automated diatom detection method based on YOLOv5 framework and its preliminary study for taxonomy recognition in the forensic diatom test.

The diatom test is a forensic technique that can provide supportive evidence in the diagnosis of drowning but requires the laborious observation and counting of diatoms using a microscopy with too much effort, and therefore it is promising to introduce artificial intelligence (AI) to make the test process automatic. In this article, we propose an artificial intelligence solution based on the YOLOv5 framework for the automatic detection and recognition of the diatom genera. To evaluate the performance of this AI solution in different scenarios, we collected five lab-grown diatom genera and samples of some organic tissues from drowning cases to investigate the potential upper/lower limits of the capability in detecting the diatoms and recognizing their genera. Based on the study of the article, a recall score of 0.95 together with the corresponding precision score of 0.9 were achieved on the samples of the five lab-grown diatom genera via cross-validation, and the accuracy of the evaluation in the cases of kidney and liver is above 0.85 based on the precision and recall scores, which demonstrate the effectiveness of the AI solution to be used in drowning forensic routine.

The Thermosensitive Injectable Celecoxib-Loaded Chitosan Hydrogel for Repairing Postoperative Intervertebral Disc Defect.

Percutaneous endoscopic lumbar discectomy has been widely used in clinical practice for lumbar spine diseases. But the postoperative disc re-herniation and inflammation are the main reason for pain recurrence after surgery. The postoperative local defect of the intervertebral disc will lead to the instability of the spine, further aggravating the process of intervertebral disc degeneration. In this work, we successfully synthesized the thermosensitive injectable celecoxib-loaded chitosan hydrogel and investigated its material properties, repair effect, biocompatibility, and histocompatibility in in vitro and in vivo study. In vitro and in vivo, the hydrogel has low toxicity, biodegradability, and good biocompatibility. In an animal experiment, this composite hydrogel can effectively fill local tissue defects to maintain the stability of the spine and delay the process of intervertebral disc degeneration after surgery. These results indicated that this composite hydrogel will be a promising way to treat postoperative intervertebral disc disease in future clinical applications.

Extensive Spinal Epidural Abscess Resulting in Complete Paraplegia Treated by Selective Laminectomies and Irrigation.

BACKGROUND: Spinal epidural abscess (SEA) is an uncommon clinical entity that is often subject to delayed diagnosis and suboptimal treatment. Untreated disease leads to compression of the spinal cord, resulting in devastating complications. CASE PRESENTATION: A 56-year-old man visited our hospital for progressive lower back and lower extremity pain of several days' duration. Significant pyrexia (39.5°C) and elevated C-reactive protein (89.2 mg/L) were detected during admission, but no positive neurological examination findings were observed. Magnetic resonance imaging revealed pyogenic discitis at L3-4. Despite the administration of directed antibiotic therapy, the patient's condition rapidly deteriorated, culminating in complete paraplegia secondary to an extensive SEA from L4 to C7. Emergency spinal decompression surgery was canceled due to his poor clinical condition and refusal of informed consent. After further deterioration, he consented to two-level selective laminectomies and irrigation. CONCLUSIONS: In contrast with prior case reports, this case illustrates the natural history of an extensive SEA during conservative and late surgical treatment. Early diagnosis and timely surgical decompression are of great importance for extensive SEA.

Evaluation of Inspection Efficiency of Diatom Artificial Intelligence Search System Based on Scanning Electron Microscope.

OBJECTIVES: To explore the application values of diatom artificial intelligence (AI) search system in the diagnosis of drowning. METHODS: The liver and kidney tissues of 12 drowned corpses were taken and were performed with the diatom test, the view images were obtained by scanning electron microscopy (SEM). Diatom detection and forensic expert manual identification were carried out under the thresholds of 0.5, 0.7 and 0.9 of the diatom AI search system, respectively. Diatom recall rate, precision rate and image exclusion rate were used to detect and compare the efficiency of diatom AI search system. RESULTS: There was no statistical difference between the number of diatoms detected in the target marked by the diatom AI search system and the number of diatoms identified manually (P>0.05); the recall rates of the diatom AI search system were statistically different under different thresholds (P<0.05); the precision rates of the diatom AI system were statistically different under different thresholds(P<0.05), and the highest precision rate was 53.15%; the image exclusion rates of the diatom AI search system were statistically different under different thresholds (P<0.05), and the highest image exclusion rate was 99.72%. For the same sample, the time taken by the diatom AI search system to identify diatoms was only 1/7 of that of manual identification. CONCLUSIONS: Diatom AI search system has a good application prospect in drowning cases. Its automatic diatom search ability is equal to that of experienced forensic experts, and it can greatly reduce the workload of manual observation of images.

Pathway of Diatoms Enter Experimental Rabbits through the Lymphatic System of the Digestive Tract.

OBJECTIVES: To study whether diatoms can enter the body through the lymphatic system of the digestive tract. METHODS: Twenty experimental rabbits were divided into the test group and the control group randomly, and intragastric administration was performed with 20 mL water sample from the Pearl River and 20 mL ultrapure water, respectively. After 30 min, lymph, lungs, livers and kidneys were extracted for the diatom test. The concentration, size and type of diatoms were recorded. RESULTS: The concentration of diatoms of the test group was higher than that of the control group (P<0.05). In the test group, Stephanodiscus, Coscinodiscus, Cyclotella, Melosira, Nitzschia, Synedra, Cymbella, and Navicula were detected; in the control group, Stephanodiscus, Coscinodiscus and Cyclotella were detected. The long diameter and the short diameter of diatoms of the test group were higher than those of the control group (P<0.05). In the test group, 1-2 diatoms were detected in 3 lung samples and 2 liver samples, which were Stephanodiscus or Cyclotella, and no diatoms were detected in the kidney samples; in the control group, 1-2 diatoms were detected in 2 lung samples and 3 liver samples, which were Stephanodiscus or Coscinodiscus, and no diatoms were detected in the kidney samples. CONCLUSIONS: Diatoms can enter the body through the lymphatic fluid, which is one of the reasons for the presence of diatoms in tissues and organs of non-drowning cadavers.

Effects of Digestive Temperature and Time on Diatom Test.

OBJECTIVES: To study the effects of temperature and time for diatoms digestion and find out suitable digestive temperature and time. METHODS: Eighty pieces of liver tissues were collected, each piece of tissue was 2 g, and 2 mL Pearl River water was added to each piece of tissue. The digestion temperature was set at 100 ℃, 120 ℃, 140 ℃, 160 ℃, 180 ℃ and the digestion time was set at 40, 50, 60, 70, 80 min. The liver tissue and water mixture were divided into 8 portions in each group. All the samples were tested by microwave digestive - vacuum filtration - automated scanning electron microscopy method. The quantity of diatom recovered and the quality of residue on the membrane were recorded. RESULTS: When the digestion time was set to 60 min, there were statistically significant differences in the number of diatoms recovered at different temperatures (P<0.05). The maximum number of diatoms recovered was (28 797.50±6 009.67) at 140 ℃, and the minimum residue was (0.60±0.28) mg at 180 ℃. When the digestion temperature was set at 140 ℃, there were statistically significant differences in the number of diatoms recovered at different digestion times (P<0.05). The number of diatoms recovered was the highest at 40 min, it was up to (20 650.88±1 950.29), and the residue quality of each group had no statistical significance among different digestion time groups(P>0.05). CONCLUSIONS: The effect of diatom digestion is related to temperature and time. When the digestion temperature was 140 ℃ and the digestion time was 40, 50 and 60 min, it is favorable for diatom test.

Comparison of Application of MD-VF-Auto SEM Method and Plankton Gene Multiplex PCR System in the Diagnosis of Drowning.

OBJECTIVES: To compare the application effect of microwave digestion - vacuum filtration - automated scanning electron microscopy (MD-VF-Auto SEM) method and plankton gene multiplex PCR system in the diagnosis of drowning. METHODS: Lung, liver and kidney tissue of 10 non-drowning cases and 50 drowning cases were prepared for further MD-VF-Auto SEM method analysis and plankton gene multiplex PCR system analysis. The positive detection rate of the two methods in each tissue was calculated. RESULTS: The positive rate of the MD-VF-Auto SEM method detecting diatoms in drowning cases was 100%, and few diatoms were detected in the liver and kidney tissues of 6 non-drowning cases. By using the plankton gene multiplex PCR system, the diatom positive rate of drowning cases was 84%, and all the non-drowning cases were negative. There were significant differences in the positive rate of the liver, kidney tissues between MD-VF-Auto SEM method and plankton gene multiplex PCR system (P<0.05), as well as the total positive rate of cases. However, no significant differences were found in the positive rates of lung tissues (P>0.05). CONCLUSIONS: MD-VF-Auto SEM method is more sensitive than plankton gene multiplex PCR system in diatom test. But the plankton gene multiplex PCR system can also detect plankton other than diatoms. Combination of the two methods can provide a more reliable basis for the diagnosis of drowning.

Application of Diatoms Quantitative Analysis in the Diagnosis of Drowning.

OBJECTIVES: To retrospectively analyze diatom test cases of corpses in water and discuss the value of quantitative analysis of diatoms in the diagnosis of drowning. METHODS: A total of 490 cases of water-related death were collected. They were divided into drowning group and postmortem immersion group according to the cause of death. Diatoms in lung, liver, kidney tissue and water sample were analyzed quantitatively by microwave digestion-vacuum filtration-automated scanning electron microscopy (MD-VF-Auto SEM) method. The ratios of content of diatoms in lung tissue and water sample (CL/CD) were calculated. RESULTS: The results of diatom test for three organs (lung, liver and kidney) were all positive in 400 cases (85.5%); the content of diatom in lung, liver, kidney tissues, and water samples of drowning group were (113 235.9±317 868.1), (26.7±75.6), (23.3±52.2) and (12 113.3±21 760.0) cells/10 g, respectively; the species of diatom were (7.5±2.8), (2.6±1.9), (2.9±2.1) and (8.9±3.0) types, respectively; the CL/CD of drowning group and postmortem immersion group were (100.6±830.7) and (0.3±0.4), respectively. CONCLUSIONS: Quantitative analysis of diatoms can provide supportive evidence for the diagnosis of drowning, and the parameter CL/CD can be introduced into the analysis to make a more accurate diagnosis of drowning.