Simultaneous and sensitive detection of methylparaben and its metabolites by using molecularly imprinted solid-phase microextraction fiber array technique.

BACKGROUND: Methylparaben (MP), a commonly used antibacterial preservative, is widely used in personal care products, foods, and pharmaceuticals. MP and its metabolites are easy to enter the water environment, and their exposure and accumulation have negative effects on the ecological environment and human health, and have endocrine disrupting activity and potential physiological toxicity. It is still the primary issue of environmental analysis and ecological risk assessment to develop simple and reliable methods for simultaneous sensitive detection of these compounds in environmental water. RESULTS: In this paper, a flexible molecularly imprinted fiber array strategy is proposed for simultaneous enrichment and detection of trace MP and its four main metabolites. The experimental results showed that the three-fiber imprinted fiber array constructed by MP imprinted fiber had the best effect on the simultaneous enrichment of these five target analytes. The enrichment capacity of the imprinted fiber array was 214-456 times, 314-1201 times and 38-685 times that of commercial PA, PDMS and PDMS/DVB fiber arrays, respectively. The limit of detection (LOD) of this method was 0.033 µg L-1. The spiked recovery rate was 86.78-113.96 %, and RSD was less than 9.17 %. In addition, this molecularly imprinted SPME fiber array has good stability, long service life and can be used repeatedly at least 100 times. SIGNIFICANCE: This molecularly imprinted fiber array strategy can flexibly assemble different molecularly imprinted SPME fibers together, effectively improve the enrichment ability and detection sensitivity, and achieve simultaneous selective enrichment and detection of several analytes. This is an easy, efficient and reliable method for monitoring several trace analytes simultaneously in intricate environmental matrices.

A molecularly imprinted fiber array solid-phase microextraction strategy for simultaneous detection of multiple estrogens.

A kind of selective enrichment material based on a homemade molecularly imprinted polymer (MIP) fiber array with high adsorption capacity was developed for the accurate analysis of estrogens in food samples. Here, the MIP with 17ß-estradiol as the template was obtained by in situ polymerization. The chemical composition, morphologies, surface area, and pore size of the polymer were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and Brunauer-Emmett-Teller theory. The extraction time, desorption solvent, desorption time, ionic strength, and the pH of solution were investigated to ascertain the best extraction conditions. Under the optimal extraction conditions, three fiber coatings of 17ß-estradiol MIP and commercial polyacrylate (PA) were bound to a homemade handle to assemble the fiber array, respectively. The findings showed that the three-fiber array of the MIP significantly improved the extraction capacity by 145 times compared to PA. The MIP fiber array showed high adsorption capacity for the template molecule 17ß-estradiol and its structural analogues estrone, bisphenol F, bisphenol B, and bisphenol A, with enrichment factors of 99.60-133.16. A molecularly imprinted polymer solid-phase microextraction fiber array (MIP-SPME fiber array) coupled with high-performance liquid chromatography-diode array detection was used for the analysis and detection of the five estrogens in milk and yogurt samples. Satisfactory recoveries were achieved ranging from 74.75-119.41% with <9.42% relative standard deviations. The developed method for the simultaneous determination of trace estrogens in food samples exhibited a limit of detection of 0.33 µg L-1. The MIP-SPME fiber array provided an available strategy for improving the selectivity and adsorption capacity of SPME for trace target component analysis in complex matrices and increasing the sensitivity of the analytical method.

A multi-site recognition molecularly imprinted solid-phase microextraction fiber for selective enrichment of three cross-class environmental endocrine disruptors.

Molecularly imprinted solid-phase microextraction fibers with multi-site recognition were prepared for the simultaneous enrichment of three cross-class environmental endocrine disruptors (EEDs) in environmental water. The surface morphology of the multi-site recognition molecularly imprinted fibers was characterized using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, and surface area and pore size analyzer. Under optimal extraction conditions, the molecularly imprinted fibers showed higher extraction capacity to bisphenol F, diethyl phthalate, and methyl paraben than non-imprinted polymer fibers and commercial fibers. Compared with commercial solid-phase microextraction fibers, the multi-site recognition molecularly imprinted fibers showed superior extraction performance at different concentrations of analytes. The selectivity study confirmed that the multi-site recognition molecularly imprinted solid-phase microextraction fibers were highly selective not only for specific template molecules but also for bisphenols, parabens, and phthalates. Furthermore, the method achieved a limit of detection of 0.003-0.02 µg L-1 for the three cross-class EEDs in environmental water samples with recoveries ranging from 75.76% to 112.69% and relative standard deviations below 11.46%. Thus, the novel MIP fibers with multi-site recognition prepared in this work have provided a promising approach in the field of specific adsorption and a strategy for the simultaneous and sensitive monitoring of multiple cross-class trace EEDs.

ß-Cyclodextrin-Based Supramolecular Imprinted Fiber Array for Highly Selective Detection of Parabens.

A novel high-throughput array analytical platform based on derived ß-cyclodextrin supramolecular imprinted polymer (SMIP) fibers was constructed to achieve selective enrichment and removal of parabens. SMIP fiber arrays have abundant imprinting sites and introduce the host−guest inclusion effect of the derived ß-cyclodextrin, which is beneficial to significantly improve the adsorption ability of fiber for parabens. Upon combination with HPLC, a specific and sensitive recognition method was developed with a low limit of detection (0.003−0.02 µg/L, S/N = 3) for parabens analysis in environmental water. This method has a good linearity (R > 0.9994) in the linear range of 0.01−200 µg/L. The proposed SMIP fiber array with high-throughput adsorption capacity has great potential in monitoring water pollution, which also provides a reliable reference for the analysis of more categories of pharmaceutical and personal care product pollutants.

Antagonistic effects of selenium on lead-induced oxidative stress and apoptosis of Leydig cells in sheep.

The objective of this study was to investigate the antagonistic effects of selenium (Se) on lead (Pb)-induced oxidative stress and apoptosis of sheep Leydig cells and its underlying mechanism. Leydig cells collected from 8-month-old sheep were treated with Pb (40 µmol/L) and/or Se (2 µmol/L), respectively. CCK-8 assay was used to detect cell proliferation and apoptosis after cultured for 48 h. The abundances of pro-apoptosis (BAX, CASPASE 3 and CASPASE 8) and NRF2-related (NRF2, HO-1, NQO1 and γ-GCS) genes were detected by real-time PCR and western blot analysis, respectively. The results showed that the highest cell viability was observed in the Se group. Compared with the control group, Pb treatment led to the higher ROS level and greater abundances of BAX, CASPASE 3 and CASPASE 8 mRNA transcripts. Treatment with Pb + Se resulted in an increased (P < 0.05) abundances of NRF2, HO-1, NQO1 and γ-GCS mRNA transcripts and proteins. Compared with the Pb group, the Se + Pb treatment dramatically decreased (P < 0.05) the ROS level and relative abundances of pro-apoptosis genes. The greater (P < 0.05) abundances of pro-apoptosis and NRF2-related mRNA transcripts and proteins were also obtained in the Se + Pb group. The abundances of BAX, CASPASE 3 and CASPASE 8 genes in the SeML385 group were greater (P < 0.05) than in the Se group. Compared with the corresponding groups without ML385, treatment with ML385 decreased (P < 0.05) cell viability and the relative abundances of pro-apoptosis and NRF2-related genes. These results indicate that Pb-induced oxidative stress can inhibit the viability of Leydig cells by modulating pro-apoptosis gene expression. NRF2 pathway could be involved in the antagonistic effect of Se on Pb-induced apoptosis of Leydig cells in sheep. This study is expected to provide some experimental evidences for Se treatment of Pb-induced reproductive disorders.

A Review on Molecularly Imprinted Polymers Preparation by Computational Simulation-Aided Methods.

Molecularly imprinted polymers (MIPs) are obtained by initiating the polymerization of functional monomers surrounding a template molecule in the presence of crosslinkers and porogens. The best adsorption performance can be achieved by optimizing the polymerization conditions, but this process is time consuming and labor-intensive. Theoretical calculation based on calculation simulations and intermolecular forces is an effective method to solve this problem because it is convenient, versatile, environmentally friendly, and inexpensive. In this article, computational simulation modeling methods are introduced, and the theoretical optimization methods of various molecular simulation calculation software for preparing molecularly imprinted polymers are proposed. The progress in research on and application of molecularly imprinted polymers prepared by computational simulations and computational software in the past two decades are reviewed. Computer molecular simulation methods, including molecular mechanics, molecular dynamics and quantum mechanics, are universally applicable for the MIP-based materials. Furthermore, the new role of computational simulation in the future development of molecular imprinting technology is explored.

Effects of selenium on the proliferation and apoptosis of sheep spermatogonial stem cells in vitro.

The objective of this study was to investigate effects of selenium (Se) on proliferation and apoptosis of sheep spermatogonial stem cells (SSC) in vitro. The SSC were assigned to five treatment groups (0, 2.0, 4.0, 8.0 and 16.0 µmol/L Se). After treatment with Se for 96 h, cell proliferation and apoptosis were evaluated. The relative abundance of P53 mRNA transcript and protein, cell cycle and apoptosis-related genes were detected using real-time PCR and Western blot quantifications, respectively. The results indicate there were the least cell proliferation rates in the Se16.0 group. Treatments with relatively greater Se concentrations (8.0 and 16.0 µmol/L) resulted in a greater percentage of apoptotic cells, which was consistent with the relative abundances of P53, P21, P27 and pro-apoptosis mRNA transcripts. There were relatively greater ROS concentrations in the control, Se8.0 and Se16.0 groups. Compared with the control group, treatment with the Se concentration of 16.0 µmol/L resulted in an increased abundance of P53, P21, P27 and BAX proteins. Treatment with Pifithrin-α suppressed the increase in abundance of P53 and P21 proteins induced by the relatively greater concentration of Se (16.0 µmol/L), however, did not result in a change in abundances of P27 and BAX proteins. These results indicate the regulatory functions of Se on proliferation and apoptosis of sheep SSC is associated with the P21-mediated P53 signalling pathway. The P27 and BAX proteins have limited functions during the apoptotic process of SSC induced by the relatively greater concentrations of Se.

Effects of maternal dietary selenium (Se-enriched yeast) on testis development, testosterone level and testicular steroidogenesis-related gene expression of their male kids in Taihang Black Goats.

To investigate the effects of maternal dietary selenium (Se-enriched yeast) on testis development, testosterone level and steroidogenesis-related gene expression in testis of their male kids, selected pregnant Taihang Black Goats were randomly allotted to four treatment groups. They were fed the basal gestation and lactation diets supplemented with 0 (control), 0.5, 2.0 and 4.0 mg of Se/kg DM. Thirty days after weaning, testes were collected from the kids. After the morphological development status of testis was examined, tissue samples were collected for analyzing testosterone concentration and histological parameters. Testosterone synthesis-related genes were detected using real-time PCR. Localization and quantification of androgen receptor (AR) in testis of goats were determined by immunohistochemical and western blot analysis. The results show that Se supplementation in the diet of dams led to higher (p < 0.05) testicular weight, volume, length, width, transverse and vertical grith of their male kids. Excessive Se (4.0 mg/kg) can inhibit the development of testis by decreasing testicular weight and volume. The density of spermatogenic cells and Leydig cells in the Se treatment groups was significantly (p < 0.05) higher than that in the control. Maternal dietary Se did not affect the thickness of testes, thickness of germinal epithelium and diameter of seminiferous tubule. Se supplemented in the diet of dams improved the testosterone level in testis tissue and serum, and promote the expression of testosterone-related genes. The mRNA expression of StAR, 3ß-HSD and CYP11A1 was decreased with the increasing dietary Se levels of dams. Maternal dietary Se can improve the AR protein abundance in testis of their offspring. AR immunopositive product was detected in Leydig cells, peritubular myoid cells, perivascular smooth muscle cells, primary spermatocytes and spermatids. The expression of AR in spermatogenetic cells is stage specific. This study suggests that maternal dietary Se can influence the testis development and spermatogenesis of their male kids by modulating testosterone synthesis in goats. More attention should be given to the potential role of maternal nutrition in improving reproductive performance of their offspring.