Biofilm formation - what we can learn from recent developments.

Although biofilms have been observed early in the history of microbial research, their impact has only recently been fully recognized. Biofilm infections, which contribute to up to 80% of human microbial infections, are associated with common human disorders, such as diabetes mellitus and poor dental hygiene, but also with medical implants. The associated chronic infections such as wound infections, dental caries and periodontitis significantly enhance morbidity, affect quality of life and can aid development of follow-up diseases such as cancer. Biofilm infections remain challenging to treat and antibiotic monotherapy is often insufficient, although some rediscovered traditional compounds have shown surprising efficiency. Innovative anti-biofilm strategies include application of anti-biofilm small molecules, intrinsic or external stimulation of production of reactive molecules, utilization of materials with antimicrobial properties and dispersion of biofilms by digestion of the extracellular matrix, also in combination with physical biofilm breakdown. Although basic principles of biofilm formation have been deciphered, the molecular understanding of the formation and structural organization of various types of biofilms has just begun to emerge. Basic studies of biofilm physiology have also resulted in an unexpected discovery of cyclic dinucleotide second messengers that are involved in interkingdom crosstalk via specific mammalian receptors. These findings even open up new venues for exploring novel anti-biofilm strategies.

Analysis of the effect of LRP-1 silencing on the invasive potential of cancer cells by nanomechanical probing and adhesion force measurements using atomic force microscopy.

Low-density lipoprotein receptor-related protein 1 (LRP-1) can internalize proteases involved in cancer progression and is thus considered a promising therapeutic target. However, it has been demonstrated that LRP-1 is also able to regulate the endocytosis of membrane-anchored proteins. Thus, strategies that target LRP-1 to modulate proteolysis could also affect adhesion and cytoskeleton dynamics. Here, we investigated the effect of LRP-1 silencing on parameters reflecting cancer cells' invasiveness by atomic force microscopy (AFM). The results show that LRP-1 silencing induces changes in the cells' adhesion behavior, particularly the dynamics of cell attachment. Clear alterations in morphology, such as more pronounced stress fibers and increased spreading, leading to increased area and circularity, were also observed. The determination of the cells' mechanical properties by AFM showed that these differences are correlated with an increase in Young's modulus. Moreover, the measurements show an overall decrease in cell motility and modifications of directional persistence. An overall increase in the adhesion force between the LRP-1-silenced cells and a gelatin-coated bead was also observed. Ultimately, our AFM-based force spectroscopy data, recorded using an antibody directed against the ß1 integrin subunit, provide evidence that LRP-1 silencing modifies the rupture force distribution. Together, our results show that techniques traditionally used for the investigation of cancer cells can be coupled with AFM to gain access to complementary phenotypic parameters that can help discriminate between specific phenotypes associated with different degrees of invasiveness.

Effect of cholesterol and fatty acids on the molecular interactions of fengycin with Stratum corneum mimicking lipid monolayers.

The combination of atomic force microscopy (AFM) and the Langmuir trough technique was used in this work to investigate the molecular interactions of fengycin with lipid monolayers constituted of the major lipid classes found in human stratum corneum (SC). AFM imaging o f spread SC lipids/fengycin monolayers showed that fengycin preferentially partitions into cholesterol-rich phases surrounding 2D domains mainly constituted of ceramide and fatty acid molecules. Penetration experiments of fengycin from the subphase into SC-mimicking monolayers clearly indicated that the lipopeptide insertion at the lipid interface is enhanced in the presence of cholesterol. AFM analysis of mixed SC lipids/fengycin monolayers obtained after lipopeptide penetration revealed that cholesterol strongly interacts with fengycin and undergoes specific molecular interactions with more disordered, loosely packed ceramide molecules. These results highlight the capacity of fengycin to interact with the lipid constituents of the extracellular matrix of SC and, in particular, with cholesterol.

Lipid-destabilizing properties of the hydrophobic helices H8 and H9 from colicin E1.

Colicins are toxic proteins produced by Escherichia coli that must cross the membrane to exert their activity. The lipid insertion of their pf domain is linked to a conformational change which enables the penetration of a hydrophobic hairpin. They provide useful models to more generally study insertion of proteins, channel formation and protein translocation in and across membranes. In this paper, we study the lipid-destabilizing properties of helices H8 and H9 forming the hydrophobic hairpin of colicin E1. Modelling analysis suggests that those fragments behave like tilted peptides. The latter are characterized by an asymmetric distribution of their hydrophobic residues when helical. They are able to interact with a hydrophobic/hydrophilic interface (such as a lipid membrane) and to destabilize the organized system into which they insert. Fluorescence techniques using labelled liposomes clearly show that H9, and H8 to a lesser extent, destabilize lipid particles, by inducing fusion and leakage. AFM assays clearly indicate that H8 and especially H9 induce membrane fragilization. Holes in the membrane are even observed in the presence of H9. This behaviour is close to what is seen with viral fusion peptides. Those results suggest that the peptides could be involved in the toroidal pore formation of colicin E1, notably by disturbing the lipids and facilitating the insertion of the other, more hydrophilic, helices that will form the pore. Since tilted, lipid-destabilizing fragments are also common to membrane proteins and to signal sequences, we suggest that tilted peptides should have an ubiquitous role in the mechanism of insertion of proteins into membranes.

Decrease of elastic moduli of DOPC bilayers induced by a macrolide antibiotic, azithromycin.

The elastic properties of membrane bilayers are key parameters that control its deformation and can be affected by pharmacological agents. Our previous atomic force microscopy studies revealed that the macrolide antibiotic, azithromycin, leads to erosion of DPPC domains in a fluid DOPC matrix [A. Berquand, M. P. Mingeot-Leclercq, Y. F. Dufrene, Real-time imaging of drug-membrane interactions by atomic force microscopy, Biochim. Biophys. Acta 1664 (2004) 198-205.]. Since this observation could be due to an effect on DOPC cohesion, we investigated the effect of azithromycin on elastic properties of DOPC giant unilamellar vesicles (GUVs). Microcinematographic and morphometric analyses revealed that azithromycin addition enhanced lipid membranes fluctuations, leading to eventual disruption of the largest GUVs. These effects were related to change of elastic moduli of DOPC, quantified by the micropipette aspiration technique. Azithromycin decreased both the bending modulus (k(c), from 23.1+/-3.5 to 10.6+/-4.5 k(B)T) and the apparent area compressibility modulus (K(app), from 176+/-35 to 113+/-25 mN/m). These data suggested that insertion of azithromycin into the DOPC bilayer reduced the requirement level of both the energy for thermal fluctuations and the stress to stretch the bilayer. Computer modeling of azithromycin interaction with DOPC bilayer, based on minimal energy, independently predicted that azithromycin (i) inserts at the interface of phospholipid bilayers, (ii) decreases the energy of interaction between DOPC molecules, and (iii) increases the mean surface occupied by each phospholipid molecule. We conclude that azithromycin inserts into the DOPC lipid bilayer, so as to decrease its cohesion and to facilitate the merging of DPPC into the DOPC fluid matrix, as observed by atomic force microscopy. These investigations, based on three complementary approaches, provide the first biophysical evidence for the ability of an amphiphilic antibiotic to alter lipid elastic moduli. This may be an important determinant for drug: lipid interactions and cellular pharmacology.

Molecular organization of surfactin-phospholipid monolayers: effect of phospholipid chain length and polar head.

Mixed monolayers of the surface-active lipopeptide surfactin-C(15) and various lipids differing by their chain length (DMPC, DPPC, DSPC) and polar headgroup (DPPC, DPPE, DPPS) were investigated by atomic force microscopy (AFM) in combination with molecular modeling (Hypermatrix procedure) and surface pressure-area isotherms. In the presence of surfactin, AFM topographic images showed phase separation for each surfactin-phospholipid system except for surfactin-DMPC, which was in good agreement with compression isotherms. On the basis of domain shape and line tension theory, we conclude that the miscibility between surfactin and phospholipids is higher for shorter chain lengths (DMPC>DPPC>DSPC) and that the polar headgroup of phospholipids influences the miscibility of surfactin in the order DPPC>DPPE>DPPS. Molecular modeling data show that mixing surfactin and DPPC has a destabilizing effect on DPPC monolayer while it has a stabilizing effect towards DPPE and DPPS molecular interactions. Our results provide valuable information on the activity mechanism of surfactin and may be useful for the design of surfactin delivery systems.

Penetration of surfactin into phospholipid monolayers: nanoscale interfacial organization.

Atomic force microscopy (AFM) combined with surface pressure-area isotherms were used to probe the interfacial behavior of phospholipid monolayers following penetration of surfactin, a cyclic lipopeptide produced by Bacillus subtilis strains. Prior to penetration experiments, interfacial behavior of different surfactin molecules (cyclic surfactins with three different aliphatic chain lengths--S13, S14, and S15--and a linear surfactin obtained by chemical cleavage of the cycle of the surfactin S15) has been investigated. A more hydrophobic aliphatic chain induces greater surface-active properties of the lipopeptide. The opening of the peptide ring reduces the surface activity. The effect of phospholipid acyl chain length (dimyristoylphosphatidylcholine, dipalmitoylphosphatidylcholine- (DPPC), and distearoylphosphatidylcholine) and phospholipid polar head (DPPC, dipalmitoylphosphatidylethanolamine and dipalmitoylphosphatidylserine) on monolayer penetration properties of the surfactin S15 has been explored. Results showed that while the lipid monolayer thickness and the presence of electrostatic repulsions from the interfacial film do not significantly influence surfactin insertion, these parameters strongly modulate the ability of the surfactin to alter the nanoscale organization of the lipid films. We also probed the effect of surfactin structure (influence of the aliphatic chain length and of the cyclic structure of the peptide ring) on the behavior of DPPC monolayers. AFM images and isotherms showed that surfactin penetration is promoted by longer lipopeptide chain length and a cyclic polar head. This indicates that hydrophobic interactions are of main importance for the penetration power of surfactin molecules.

Fluidics of a nanogap.

We have determined the filling properties of nanogaps with chemically heterogeneous walls. The quantitative criteria we present allow the prediction of the liquid loading of the nanostructure. They can easily be applied in combination with contact-angle measurements on planar substrates of the nanogap materials. We present an application of the theory to a recently developed nanogap biosensor. Chemical force microscopy (CFM) is employed to characterize the initial silanol properties of the gap. The functionality of the complex surface chemistry of the biosensor is demonstrated by the observation of functionalized nanoparticles in the gap with its resulting characteristic current-voltage relationship.

Sample preparation procedures for biological atomic force microscopy.

Since the late 1980s, atomic force microscopy (AFM) has been increasingly used in biological sciences and it is now established as a versatile tool to address the structure, properties and functions of biological specimens. AFM is unique in that it provides three-dimensional images of biological structures, including biomolecules, lipid films, 2D protein crystals and cells, under physiological conditions and with unprecedented resolution. A crucial prerequisite for successful, reliable biological AFM is that the samples need to be well attached to a solid substrate using appropriate, nondestructive methods. In this review, we discuss common techniques for immobilizing biological specimens for AFM studies.

Interaction of the macrolide antibiotic azithromycin with lipid bilayers: effect on membrane organization, fluidity, and permeability.

PURPOSE: To investigate the effect of a macrolide antibiotic, azithromycin, on the molecular organization of DPPC:DOPC, DPPE:DOPC, SM:DOPC, and SM:Chol:DOPC lipid vesicles as well as the effect of azithromycin on membrane fluidity and permeability. METHODS: The molecular organization of model membranes was characterized by atomic force microscopy (AFM), and the amount of azithromycin bound to lipid membranes was determined by equilibrium dialysis. The membrane fluidity and permeability were analyzed using fluorescence polarization studies and release of calcein-entrapped liposomes, respectively. RESULTS: In situ AFM images revealed that azithromycin leads to the erosion and disappearance of DPPC and DPPE gel domains, whereas no effect was noted on SM and SM:cholesterol domains. Although azithromycin did not alter the permeability of DPPC:DOPC, DPPE:DOPC, SM:DOPC, and SM:Chol:DOPC lipid vesicles, it increased the fluidity at the hydrophilic/hydrophobic interface in DPPC:DOPC and DPPE:DOPC models. This effect may be responsible for the ability of azithromycin to erode the DPPC and DPPE gel domains, as observed by AFM. CONCLUSIONS: This study shows the interest of both AFM and biophysical methods to characterize the drug-membrane interactions.

Nanoscale properties of mixed fengycin/ceramide monolayers explored using atomic force microscopy.

To gain insight into the interactions between fengycin and skin membrane lipids, mixed fengycin/ceramide monolayers were investigated using atomic force microscopy (AFM) (monolayers supported on mica) and surface pressure-area isotherms (monolayers at the air-water interface). AFM topographic images revealed phase separation in mixed monolayers prepared at 20 degrees C/pH 2 and composed of 0.25 and 0.5 fengycin molar ratios, in the form of two-dimensional (2-D) hexagonal crystalline domains of ceramide surrounded by a fengycin-enriched fluid phase. Surface pressure-area isotherms as well as friction and adhesion AFM images confirmed that the two phases had different molecular orientations: while ceramide formed a highly ordered phase with crystalline chain packing, fengycin exhibited a disordered fluid phase with the peptide ring lying horizontally on the substrate. Increasing the temperature and pH to values corresponding to the skin parameters, i.e., 37 degrees C/pH 5, was found to dramatically affect the film organization. At low fengycin molar ratio (0.25), the hexagonal ceramide domains transformed into round domains, while at higher ratio (0.5) these were shown to melt into a continuous fengycin/ceramide fluid phase. These observations were directly supported by the thermodynamic analysis (deviation from the additivity rule, excess of free energy) of the monolayer properties at the air-water interface. Accordingly, this study demonstrates that both the environmental conditions (temperature, pH) and fengycin concentration influence the molecular organization of mixed fengycin/ceramide monolayers. We believe that the ability to modulate the formation of 2-D domains in the skin membrane may be an important biological function of fengycin, which should be increasingly investigated in future pharmacological research.

Controlling the supramolecular organisation of adsorbed collagen layers.

The supramolecular organisation of collagen adsorbed on polymer substrates was investigated as a function of properties of the substrates (chemical nature, roughness) and of characteristics of the collagen solution (concentration, state of aggregation) as well as details of the preparation procedure (adsorption time, drying rate). Elongated structures are formed at the interface by assembly of collagen molecular segments protruding into the solution. This is favoured by using a hydrophobic and smooth substrate, by increasing the adsorbed amount and by increasing the adsorption time, even beyond stages at which the adsorbed amount does no longer vary. Collagen adsorbed at low amount on hydrophobic substrates strongly reorganises into a net-like pattern if drying is performed at low rate. This is due to dewetting and collagen displacement by the water meniscus. Applications derived from the control of collagen organisation are presented. Nanostructured polymer surfaces were created starting from a collagen template. The attachment and the cytoskeletal organisation of mammalian cells (MCF-7/6) were also shown to depend on collagen organisation.

Real-time imaging of drug-membrane interactions by atomic force microscopy.

Understanding drug-biomembrane interactions at high resolution is a key issue in current biophysical and pharmaceutical research. Here we used real-time atomic force microscopy (AFM) imaging to visualize the interaction of the antibiotic azithromycin with lipid domains in model biomembranes. Various supported lipid bilayers were prepared by fusion of unilamellar vesicles on mica and imaged in buffer solution. Phase-separation was observed in the form of domains made of dipalmitoylphosphatidylcholine (DPPC), sphingomyelin (SM), or SM/cholesterol (SM/Chl) surrounded by a fluid matrix of dioleoylphosphatidylcholine (DOPC). Time-lapse images collected following addition of 1 mM azithromycin revealed progressive erosion and disappearance of DPPC gel domains within 60 min. We attribute this effect to the disruption of the tight molecular packing of the DPPC molecules by the drug, in agreement with earlier biophysical experiments. By contrast, SM and SM-Chl domains were not modified by azithromycin. We suggest that the higher membrane stability of SM-containing domains results from stronger intermolecular interactions between SM molecules. This work provides direct evidence that the perturbation of lipid domains by azithromycin strongly depends on the lipid nature and opens the door for developing new applications in membrane biophysics and pharmacology.

The macrolide antibiotic azithromycin interacts with lipids and affects membrane organization and fluidity: studies on Langmuir-Blodgett monolayers, liposomes and J774 macrophages.

The macrolide antibiotic azithromycin was shown to markedly inhibit endocytosis. Here we investigate the interaction of azithromycin with biomembranes and its effects on membrane biophysics in relation to endocytosis. Equilibrium dialysis and 31P NMR revealed that azithromycin binds to lipidic model membranes and decreases the mobility of phospholipid phosphate heads. In contrast, azithromycin had no effect deeper in the bilayer, based on fluorescence polarization of TMA-DPH and DPH, compounds that, respectively, explore the interfacial and hydrophobic domains of bilayers, and it did not induce membrane fusion, a key event of vesicular trafficking. Atomic force microscopy showed that azithromycin perturbed lateral phase separation in Langmuir-Blodgett monolayers, indicating a perturbation of membrane organization in lateral domains. The consequence of azithromycin/ phospholipid interaction on membrane endocytosis was next evaluated in J774 macrophages by using three tracers with different insertion preferences inside the biological membranes and intracellular trafficking: C6-NBD-SM, TMA-DPH and N-Rh-PE. Azithromycin differentially altered their insertion into the plasma membrane, slowed down membrane trafficking towards lysosomes, as evaluated by the rate of N-Rh-PE self-quenching relief, but did not affect bulk membrane internalization of C6-NBD-SM and TMA-DPH. Azithromycin also decreased plasma membrane fluidity, as shown by TMA-DPH fluorescence polarization and confocal microscopy after labeling by fluorescent concanavalin A. We conclude that azithromycin directly interacts with phospholipids, modifies biophysical properties of membrane and affects membrane dynamics in living cells. This antibiotic may therefore help to elucidate the physico-chemical properties underlying endocytosis.

Imaging mixed lipid monolayers by dynamic atomic force microscopy.

Phase imaging with tapping mode atomic force microscopy (AFM) and force modulation microscopy were used to probe the mechanical properties of phase-separated lipid monolayers made of a mixture (0.25:0.75) of the surface-active lipopeptide surfactin and of dipalmitoylphosphatidylcholine (DPPC). The pi-A isotherms and the result of a molecular modeling study revealed a loose, 2-D liquid-like organization for the surfactin molecules and a closely packed, 2-D solid-like organization for DPPC molecules. This difference in molecular organization was responsible for a significant contrast in height, tapping mode phase and force modulation amplitude images. Phase imaging at light tapping, i.e., with a ratio of the set-point tapping amplitude with respect to the free amplitude A(sp)/A(0) approximately 0.9, showed larger phase shifts on the solid-like DPPC domains attributed to larger Young's modulus. However, contrast inversion was observed for A(sp)/A(0)<0.7, suggesting that at moderate and hard tapping the image contrast was dominated by the probe-sample contact area. Surprisingly, force modulation amplitude images showed larger stiffness for the liquid-like surfactin domains, suggesting that the contrast was dominated by contact area effects rather than by Young's modulus. These data emphasize the complex nature of the contrast mechanisms of dynamic AFM images recorded on mixed lipid monolayers.

Probing molecular interactions and mechanical properties of microbial cell surfaces by atomic force microscopy.

Knowledge of the surface properties of microbial cells is a key to gain a detailed understanding of their functions in the natural environment and to efficiently exploit them in biotechnological processes. In this paper, we present force-distance curves recorded, by atomic force microscopy (AFM) in aqueous solutions, on various microbial samples: reconstituted S-layers, whole fungal spores and several bacterial strains. The approach and retraction curves exhibited important differences--depending on the type of microorganism, on the physiological state (dormancy versus germination) and on the environmental conditions (ionic strength)--which were shown to reflect differences in long-range surface forces, adhesion forces and mechanical properties. These data illustrate the great potential of AFM force measurements to elucidate the physical properties of microbial cells and to understand, at the molecular level, biointerfacial phenomena such as cell adhesion and cell aggregation.

Application of atomic force microscopy to microbial surfaces: from reconstituted cell surface layers to living cells.

The application of atomic force microscopy (AFM) to probe the ultrastructure and physical properties of microbial cell surfaces is reviewed. The unique capabilities of AFM can be summarized as follows: imaging surface topography with (sub)nanometer lateral resolution; examining biological specimens under physiological conditions; measuring local properties and interaction forces. AFM is being used increasingly for: (i) visualizing the surface ultrastructure of microbial cell surface layers, including bacterial S-layers, purple membranes, porin OmpF crystals and fungal rodlet layers; (ii) monitoring conformational changes of individual membrane proteins; (iii) examining the morphology of bacterial biofilms, (iv) revealing the nanoscale structure of living microbial cells, including fungi, yeasts and bacteria, (v) mapping interaction forces at microbial surfaces, such as van der Waals and electrostatic forces, solvation forces, and steric/bridging forces; and (vi) probing the local mechanical properties of cell surface layers and of single cells.

Advances in the characterization of supported lipid films with the atomic force microscope.

During the past decade, the atomic force microscope (AFM) has become a key technique in biochemistry and biophysics to characterize supported lipid films, as testified by the continuous growth in the number of papers published in the field. The unique capabilities of AFM are: (i) capacity to probe, in real time and in aqueous environment, the surface structure of lipid films; (ii) ability to directly measure physical properties at high spatial resolution; (iii) possibility to modify the film structure and biophysical processes in a controlled way. Such experiments, published up to June 2000, are the focus of the present review. First, we provide a general introduction on the preparation and characterization of supported lipid films as well as on the principles of AFM. The section 'Structural properties' focuses on the various applications of AFM for characterizing the structure of supported lipid films: visualization of molecular structure, formation of structural defects, effect of external agents, formation of supported films, organization of phase-separated films (coexistence region, mixed films) and, finally, the use of supported lipid bilayers for anchoring biomolecules such as DNA, enzymes and crystalline protein arrays. The section 'Physical properties' introduces the principles of force measurements by AFM, interpretation of these measurements and their recent application to supported lipid films and related structures. Finally, we highlight the major achievements brought by the technique and some of the current limitations.

Implementation of force differentiation in the immunoassay.

A technique has been developed to apply force to the antibody-antigen complex in a solid-phase immunoassay. Force was applied to the immunochemical complex by labeling the secondary antibody with a magnetically susceptible, micrometer-size particle and placing the assay chamber in a magnetic field of defined magnitude and orientation. The force was strong enough to displace weakly bound particles but was not strong enough to rupture the immunochemical complex. The number of particles bound to the surface after applying the differentiation force was related to the analyte concentration, thus an optical detection scheme was developed for counting the number of particles on the surface. The sensitivity of the force differentiation assay was demonstrated to be one to two orders of magnitude higher than conventional solid-phase immunoassay techniques for model protein, virus, and bacterial analytes, with 99% specificity. The enhanced sensitivity of this assay appears to result from lowering the assay background through the identification of weakly adhesive, nonspecific interactions.