Impact of the Methylene Bridge Substitution in Chelating NHC-Phosphine Mn(I) Catalyst for Ketone Hydrogenation.

Systematic modification of the chelating NHC-phosphine ligand (NHC = N-heterocyclic carbene) in highly efficient ketone hydrogenation Mn(I) catalyst fac-[(Ph2PCH2NHC)Mn(CO)3Br] has been performed and the catalytic activity of the resulting complexes was evaluated using acetophenone as a benchmark substrate. While the variation of phosphine and NHC moieties led to inferior results than for a parent system, the incorporation of a phenyl substituent into the ligand methylene bridge improved catalytic performance by ca. 3 times providing maximal TON values in the range of 15000-20000. Mechanistic investigation combining experimental and computational studies allowed to rationalize this beneficial effect as an enhanced stabilization of reaction intermediates including anionic hydride species fac-[(Ph2PC(Ph)NHC)Mn(CO)3H]- playing a crucial role in the hydrogenation process. These results highlight the interest of such carbon bridge substitution strategy being rarely employed in the design of chemically non-innocent ligands.

Photoluminescence lifetime stability studies of ß-diketonate europium complexes based phenanthroline derivatives in poly(methyl methacrylate) films.

In this work, five phenanthroline derivatives substituted with different methyl groups have been selected to synthesize ß-diketonate-based europium complexes to check the influence of the substitutions on the degradation effect of those complexes in poly(methyl methacrylate) (PMMA) films. The photophysical properties of Eu(III) complexes, including absorbance, excitation, and emission have been carefully investigated in solution, solid-state, and doped in PMMA film. In all these states, the complexes exhibit an impressive red emission at 614 nm with a high photoluminescence quantum yield of up to 85 %. The films have been exposed under outdoor, indoor, and dark storage stability lifetime conditions for 1200 hours. The photoluminescence measurements recorded every 400, 800, and 1200 hours demonstrated that the film containing europium complex with phenanthroline ligand substituted by a high number of methyl groups (Eu(TTA)3L5) showed good photoluminescent stability in indoor and dark conditions, and exhibited better resistance to degradation in outdoor conditions compared to other complexes. This study has proved that phenanthroline ligands could be tuned chemically leading to better stability of those types of complexes in films which can be end-used for future stable optoelectronic devices such as luminescent solar concentrators.

Phosphine-NHC-Phosphonium Ylide Pincer Ligand: Complexation with Pd(II) and Unconventional P-Coordination of the Ylide Moiety.

An efficient synthesis of two pincer preligands [Ph2PCH(R)ImCH2CH2CH2PPh3]X2 (R = H, X = OTf; R = Ph, X = BF4) was developed. Subsequent reactions with PdCl2 and an excess of Cs2CO3 led to the formation of highly stable cationic ortho-metalated Pd(II) complexes [(P,C,C,C)Pd]X exhibiting phosphine, NHC, phosphonium ylide, and σ-aryl donor extremities. The protonation of one of the latter complexes with R = H affords the Pd(II) complex [(P,C,C)Pd(MeCN)](OTf)2 bearing an unprecedented nonsymmetrical NHC core pincer scaffold with a 5,6-chelating framework. The overall donor properties of this phosphine-NHC-phosphonium ylide ligand were estimated using the experimental νCN stretching frequency in the corresponding [(P,C,C)Pd(CNtBu](OTf)2 derivative and were shown to be competitive with the related bis(NHC)-phosphonium ylide and phenoxy-NHC-phosphonium ylide pincers. The presence of a phenyl substituent in the bridge between phosphine and NHC moieties in the ortho-metalated complex [(P,C,C,C)Pd](BF4) makes possible the deprotonation of this position using LDA to provide a persistent zwitterionic complex [(P,C,C,C)Pd] featuring a rare P-coordinated phosphonium ylide moiety in addition to a conventional C-coordinated one. The comparison of the 31P and 13C NMR data for these C- and P-bound phosphonium ylide fragments within the same molecule was performed for the first time, and the bonding situation in both cases was studied in detail by QTAIM and ELF topological analyses.

A Trojan horse approach for enhancing the cellular uptake of a ruthenium nitrosyl complex.

Ruthenium nitrosyl (RuNO) complexes continue to attract significant research interest due to several appealing features that make these photoactivatable nitric oxide (NO˙) donors attractive for applications in photoactivated chemotherapy. Interesting examples of molecular candidates capable of delivering cytotoxic concentrations of NO˙ in aqueous media have been discussed. Nevertheless, the question of whether most of these highly polar and relatively large molecules are efficiently incorporated by cells remains largely unanswered. In this paper, we present the synthesis and the chemical, photophysical and photochemical characterization of RuNO complexes functionalized with 17α-ethinylestradiol (EE), a semisynthetic steroidal hormone intended to act as a molecular Trojan horse for the targeted delivery of RuNO complexes. The discussion is centered around two main molecular targets, one containing EE (EE-Phtpy-RuNO) and a reference compound lacking this biological recognition fragment (Phtpy-RuNO). While both complexes displayed similar optical absorption profiles and NO˙ release efficiencies in aqueous media, important differences were found regarding their cellular uptake towards dermal fibroblasts, with EE-Phtpy-RuNO gratifyingly displaying a remarkable 10-fold increase in cellular uptake when compared to Phtpy-RuNO, thus demonstrating the potential drug-targeting capabilities of this biomimetic steroidal conjugate.

Phosphonium Ylides vs Iminophosphoranes: The Role of the Coordinating Ylidic Atom in cis-[Phosphine-Ylide Rh(CO)2] Complexes.

The coordinating properties of two families of ylides, namely, phosphonium ylides and iminophosphoranes, differently substituted at the ylidic center (CH2- vs NiPr-), have been investigated in structurally related cationic phosphine-ylide Rh(CO)2 complexes obtained from readily available phosphine-phosphonium salt precursors derived from an ortho-phenylene bridge. However, while the Rh(CO)2 complex bearing the P+-CH2- donor moiety proved to be stable, the P═NiPr donor end appeared to induce lability to one of the CO groups. All of the RhI carbonyl complexes in both ylide series were fully characterized, including through X-ray diffraction analysis. Based on the experimental and calculated infrared (IR) CO stretching frequencies in Rh(CO)2 complexes, we evidenced that the phosphonium ylide ligand is a stronger donor than the iminophosphorane ligand. However, we also found that the difference in the intrinsic electronic properties can be largely compensated by the introduction of an iPr substituent on the N atom of the iminophosphorane, hence pointing to the noninnocent role of the peripheral substituent and opening novel possibilities to tune the properties of metal complexes containing ylide ligands.

Modulation of the Sorption Characteristics for an H-bonded porous Architecture by Varying the Chemical Functionalization of the Channel Walls.

Five isostructural microporous supramolecular architectures prepared by H-bonded assembly between the hexa-anionic complex [Zr2 (Ox)7 ]6- (Ox=oxalate, (C2 O4 )2- ) and tripodal cations (H3 -TripCH2 -R)3+ with R=H, CH3 , OH and OBn (Bn=CH2 Ph) are reported. The possibility to obtain the same structure using a mixture of tripodal cations with different R group (R=OH and R=CH3 ) has also been successfully explored, providing a unique example of three-component H-bonded porous framework. The resulting SPA-1(R) materials feature 1D pores decorated by R groups, with apparent pore diameters ranging from 3.0 to 8.5 Å. Influence of R groups on the sorption properties of these materials is evidenced through CO2 and H2 O vapor sorption/desorption experiments, as well as with I2 capture/release experiments in liquid media. This study is one of the first to demonstrate the possibility of tuning the porosity and exerting precise control over the chemical functionalization of the pores in a given H-bonded structure, without modifying the topology of the reference structure, and thus finely adjusting the sorption characteristics of the material.

Magnetic anisotropy of transition metal and lanthanide ions in pentagonal bipyramidal geometry.

The magnetic anisotropy associated with a pentagonal bipyramidal (PBP) coordination sphere is examined on the basis of experimental and theoretical investigations. The origin and the characteristics of this anisotropy are discussed in relation to the electronic configuration of the metal ions. The effects of crystal field, structural distortion, and a second-coordination sphere on the observed anisotropies for transition meal and lanthanide ions are outlined. For the Ln derivatives, we focus on compounds showing SMM-like behavior (i.e. slow relaxation of their magnetization) in order to highlight the essential chemical and structural parameters for achieving strong axial anisotropy. The use of PBP complexes to impart controlled magnetic anisotropy in polynuclear species such as SMMs or SCMs is also addressed. This review of the magnetic anisotropies associated with a pentagonal bipyramidal coordination sphere for transition metal and lanthanide ions is intended to highlight some general trends that can guide chemists towards designing a compound with specific properties.

Structural determinations and magnetic properties of a "chiral at metal" complex and its resulting [Cu-Ln]2 compounds.

A chiral trianionic ligand possessing one amide, one imine, two phenol functions and one asymmetric carbon atom into its diamino chain reacts with CuII ions to yield anionic [LCu]- units that crystallize in a non-centrosymmetric space group as infinite 1D zig-zag chains in which a transmission of chirality to the CuII ion is effective. The distorted square planar environment of the CuII ion is large enough to induce the presence of a stereogenic CuII centre. Further reaction with LnIII ions in presence of ancillary ligands does not preserve such an arrangement but yields a tetranuclear complex made of two [LCu-Ln] units in a head-to-tail position. The tetranuclear [LCu-Ln]2 complexes made with the racemic and chiral LCu units crystallize in different space groups, so that racemization does not occur. The structural determinations confirm that a symmetry centre is present in the two structures, except for the methyl groups linked to the chiral carbon atoms, which appear as disordered in the (S-S) tetranuclear entity. Such an arrangement implies a conformation change of the diamino chain linked to the CuII ion in one [LCu-Ln] unit of the (S-S) entity, and cancels any chirality contribution of the CuII ions, as in the meso compound. Ferromagnetic Cu-Ln interactions, resulting from an alternate distribution of the CuII and LnIII ions, are the only ones to be active. Eventually the micro-Squid studies confirm that the hysteresis loops of the corresponding racemate and chiral tetranuclear [LCu-Dy]2 entities are slightly different.

Trinuclear Cyanido-Bridged [Cr2 Fe] Complexes: To Be or not to Be a Single-Molecule Magnet, a Matter of Straightness.

Trinuclear systems of formula [{Cr(LN3O2Ph )(CN)2 }2 M(H2 LN3O2R )] (M=MnII and FeII , LN3O2R stands for pentadentate ligands) were prepared in order to assess the influence of the bending of the apical M-N≡C linkages on the magnetic anisotropy of the FeII derivatives and in turn on their Single-Molecule Magnet (SMM) behaviors. The cyanido-bridged [Cr2 M] derivatives were obtained by assembling trans-dicyanido CrIII complex [Cr(LN3O2Ph )(CN)2 ]- and divalent pentagonal bipyramid complexes [MII (H2 LN3O2R )]2+ with various R substituents (R=NH2 , cyclohexyl, S,S-mandelic) imparting different steric demand to the central moiety of the complexes. A comparative examination of the structural and magnetic properties showed an obvious effect of the deviation from straightness of the M-N≡C alignment on the slow relaxation of the magnetization exhibited by the [Cr2 Fe] complexes. Theoretical calculations have highlighted important effects of the bending of the apical C-N-Fe linkages on both the magnetic anisotropy of the FeII center and the exchange interactions with the CrIII units.

Direct Access to Palladium(II) Complexes Based on Anionic C,C,C-Phosphonium Ylide Core Pincer Ligand.

The reaction of readily available imidazolium-phosphonium salt [MesIm(CH2)3PPh3](OTf)2 with PdCl2 in the presence of an excess of Cs2CO3 afforded selectively in one step the cationic Pd(II) complex [(C,C,C)Pd(NCMe)](OTf) exhibiting an LX2-type NHC-ylide-aryl C,C,C-pincer ligand via formal triple C-H bond activation. The replacement of labile MeCN in the latter by CNtBu and CO fragments allowed to estimate the overall electronic properties of this phosphonium ylide core pincer scaffold incorporating three different carbon-based donor ends by IR spectroscopy, cyclic voltammetry, and molecular orbital analysis, revealing its significantly higher electron-rich character compared to the structurally close NHC core pincer system with two phosphonium ylide extremities. The pincer complex [(C,C,C)Pd(CO)](OTf) represents a rare example of Pd(II) carbonyl species stable at room temperature and characterized by X-ray diffraction analysis. The treatment of isostructural cationic complexes [(C,C,C)Pd(NCMe)](OTf) and [(C,C,C)Pd(CO)](OTf) with (allyl)MgBr and nBuLi led to the formation of zwitterionic phosphonium organopalladates [(C,C,C)PdBr] and [(C,C,C)Pd(COnBu)], respectively.

Further Insights into the Oxidative Pathway of Thiocarbonyl-Type Antitubercular Prodrugs: Ethionamide, Thioacetazone, and Isoxyl.

A chemical activation study of the thiocarbonyl-type antitubercular prodrugs, ethionamide (ETH), thioacetazone (TAZ), and isoxyl (ISO), was performed. Biomimetic oxidation of ethionamide using H2O2 (1 equiv) led to ETH-SO as the only stable S-oxide compound, which was found to occur in solution in the preferential form of a sulfine (ETH═S═O vs the sulfenic acid tautomer ETH-S-OH), as previously observed in the crystal state. It was also demonstrated that ETH-SO is capable of reacting with amines, as the putative sulfinic derivative (ETH-SO2H) was supposed to do. Unlike ETH, oxidation of TAZ did not allow observation of the mono-oxygenated species (TAZ-SO), leading directly to the more stable sulfinic acid derivative (TAZ-SO2H), which can then lose a SOxH group after further oxidation or when placed in a basic medium. It was also noticed that the unstable TAZ-SO intermediate can lead to the carbodiimide derivative as another electrophilic species. It is suggested that TAZ-SOH, TAZ-SO2H, and the carbodiimide compound can also react with NH2-containing nucleophilic species, and therefore be involved in toxic effects. Finally, ISO showed a very complex reactivity, here assigned to the coexistence of two mono-oxygenated structures, the sulfine and sulfenic acid tautomers. The mono- and dioxygenated derivatives of ISO are also highly unstable, leading to a panel of multiple metabolites, which are still reactive and likely contribute to the toxicity of this prodrug.

Carbo-mer of Barrelene: A Rigid 3D-Carbon-Expanded Molecular Barrel.

After extensive studies of 1D and 2D skeletal carbo-mers based on C8 π-conjugating dialkynylbutatriene units (DABs: ∼C≡C-(R)C=C=C=C(R)-C≡C∼) bridging sp or sp2 centers in carbo-butene, carbo-xylylene or carbo-benzene derivatives, 3D versions are envisaged through carbo-barrelenes and partially reduced derivatives thereof where two or three DAB blades span a bridge between sp3 carbinol vertices or ether thereof. For R=Ph, stable representatives were synthesized through a pivotal [6]pericyclynedione, and extensively characterized by spectroscopic, electrochemical and crystallographic methods. Density functional theory calculations allow detailed analysis of structural and electronic features of the 7 Šhigh C26 barrel-shaped molecules, and show that they can behave as cages for ionic species. Beyond aesthetical concerns, the results could open prospects of applications in host-guest supramolecular chemistry and single molecule charge transport.

Quasilinear 3d-metal(i) complexes [KM(N(Dipp)SiR3)2] (M = Cr-Co) - structural diversity, solution state behaviour and reactivity.

The synthesis and characterization of neutral quasilinear 3d-metal(i) complexes of chromium to cobalt of the type [KM(N(Dipp)SiMe3)2] (Dipp = 2,6-di-iso-propylphenyl) are reported. In solid state these metal(i) complexes either occur as isolated molecules (Co) or are part of a potassium ion linked 1D-coordination polymer (Cr-Fe). In solution the potassium cation is either ligated within the ligand sphere of the metal silylamide or is separated from the complex depending on the solvent. For iron, we showcase that it is possible to use sodium or lithium metal for the reduction of the metal(ii) precursor. However, in these cases the resulting iron(i) complexes can only be isolated upon cation separation using an appropriate crown-ether. Further, the neutral metal(i) complexes are used to introduce NBu4+ as an organic cation in the case of cobalt and iron. The impact of the intramolecular cation complexation was further demonstrated upon reaction with diphenyl acetylene which leads to bond formation processes and redox disproportionation instead of η2-alkyne complex formation.

Molybdenum(III) Thiocyanate- and Selenocyanate-Based One-Dimensional Heteronuclear Polymers: Coordination Affinity-Controlled Assemblage of Mixed Spin and Mixed Valence Derivatives with Ni(II) and Co(II/III).

One-dimensional coordination polymers constructed with the 4d metallo-ligand [Mo(NCS)6]3- associated with NiII and CoII complexes are reported. The first series consists of anionic NCS-bridged [Mo-MII]- coordination polymers associated with a discrete paramagnetic complex or a diamagnetic CoIII complex acting as cations. The latter takes advantage of the coordination preference of the S-ligand for the soft 3d ions and has led to hetero-trimetallic [MoIIINiIICoIII] and mixed valence [MoIIICoIICoIII] compounds. A second series concerns neutral chains in which trinuclear [Mo M2II] units are bridged by an additional NCS anion. The soft character of the S atom was also the key to a rare example of a compound involving both high-spin and low-spin CoII centers associated with [Mo(NCS)6]. A [Mo-Ni] derivative obtained with [Mo(NCSe)6]3- has been considered in order to evaluate the effect of Se versus S on the exchange interaction. The spin distribution for selenocyanate metallo-ligand has been assessed by density functional theory calculations. The crystal structures for all compounds have been characterized, and their magnetic behaviors have been investigated. These ferrimagnetic systems are characterized by antiferromagnetic Mo-MII interactions in the range of -40 to -90 cm-1 (based on H = -JSaSb formalism) operative both with CoII and with NiII, thus demonstrating the potential of the MoIII-NCS combination for molecular systems in which exchange interactions play an important role.

NHC Core Phosphonium Ylide-based Palladium(II) Pincer Complexes: The Second Ylide Extremity Makes the Difference.

The coordinating properties of N-heterocyclic carbene (NHC) (A), phenolate (B), and phosphonium ylide (C) moieties were investigated systematically through the preparation of a family of NHC, phosphonium ylide-based pincer ligands, where the third donor extremity can be either an NHC, a phenolate, or a phosphonium ylide. The overall donor character of such ligands [NHC(AaBbCc)] (a + b + c = 2) was analyzed by comparison of the molecular orbitals (energy and shape), oxidation potentials (Epox), and IR νCO and νCN stretching frequencies of their isostructural pincer Pd(II) complexes [NHC(AaBbCc)PdL][OTf] (L = NCCH3, CO, or CNtBu). The three categories of pincer complexes based on phosphonium ylides were easily obtained by acidic treatment of their highly stable ortho-metalated Pd(II) precursors prepared in a single step from readily available N-phosphonio-substituted imidazolium salts. Analysis of IR data indicated that NHC and phenolate ligands have a similar donor character but which remains lower than that of the phosphonium ylide. The impact on catalytic performance of the incorporation of a second strongly donating phosphonium ylide into the ligand architecture was illustrated in the Pd-catalyzed allylation of aldehydes.

Multistep Photochemical Reactions of Polypyridine-Based Ruthenium Nitrosyl Complexes in Dimethylsulfoxide.

The photorelease of nitric oxide (NO·) has been investigated in dimethylsulfoxide (DMSO) on two compounds of formula [Ru(R-tpy)(bpy)(NO)](PF6)3, in which bpy stands for 2,2'-bipyridine and R-tpy for the 4'-R-2,2':6',2″-terpyridine with R = H and MeOPh. It is observed that both complexes are extremely sensitive to traces of water, leading to an equilibrium between [Ru(NO)] and [Ru(NO2)]. The photoproducts of formula [Ru(R-tpy)(bpy)(DMSO)](PF6)2 are further subjected to a photoreaction leading to a reversible linkage isomerization between the stable Ru-DMSO(S) (sulfur linked) and the metastable Ru-DMSO(O) (oxygen linked) species. A set of 4 [Ru(R-tpy)(bpy)(DMSO)]2+ complexes (R = H, MeOPh, BrPh, NO2Ph) is investigated to characterize the ratio and mechanism of the isomerization which is tentatively related to the difference in absorbance between the Ru-DMSO(S) and Ru-DMSO(O) forms. In addition, the X-ray crystal structures of [Ru(tpy)(bpy)(NO)](PF6)3 and [Ru(MeOPh-tpy)(bpy)(DMSO(S))](PF6)2 are presented.

Cyclopropenylidenephosphoranes: Rearrangement to Azetidinylidene-Methylphosphoniums.

Attempts at preparing cyclopropenylphosphonium salts by P-quaternization of α-aminophosphines with bisdiisopropylaminocyclopropenium tetrafluoroborate led to azetidin-2-ylidene methylphosphoniums as unexpected isomers, in 57-85% yields. The basic structure of the products is discussed on the basis of X-ray crystallography analysis. The unprecedented 3 → 4 ring expansion process is argued to be driven by an ambivalent aromatic vs antiaromatic character (or loss of aromaticity) of the primary phosphonium product. On the basis of DFT calculations, a mechanism involving a concerted 1,4-hydride shift/electrocyclization process as the rate-determining step is proposed and discussed vs possible alternatives.

Core carbo-mer of an Extended Tetrathiafulvalene: Redox-Controlled Reversible Conversion to a carbo-Benzenic Dication.

carbo-Benzene is an aromatic molecule devised by inserting C2 units within each C-C bond of the benzene molecule. By integrating the corresponding carbo-quinoid core as bridging unit in a π-extended tetrathiafulvalene (exTTF), it is shown that a carbo-benzene ring can be reversibly formed by electrochemical reduction or oxidation. The so-called carbo-exTTF molecule was thus experimentally prepared and studied by UV-visible absorption spectroscopy and cyclic voltammetry, as well as by X-ray crystallography and by scanning tunneling microscopy (STM) on a surface of highly oriented pyrolytic graphite (HOPG). The molecule and its oxidized and reduced forms were subjected to a computational study at the density functional theory (DFT) level, supporting carbo-aromaticity as a driving force for the formation of the dication, radical cation, and radical anion. By allowing co-planarity of the dithiolylidene rings and carbo-quinoidal core, carbo-exTTFs present a promising new class of redox-active systems.

N-Cyclopropenio-imidazol-2-ylidene: An N-heterocyclic carbene bearing an N-cationic substituent.

A cationic NHC 1+ bearing an N-bound 2,3-bis(diisopropylamino)cyclopropenium group is reported. From an easily available dicationic imidazolium precursor, the coordination abilities and stereo-electronic properties of 1+ are evaluated by the formation of Pd(ii), Rh(i) and Au(i) complexes. The cationic gold(i) complex is implemented in representative intramolecular Au(i)-catalyzed cyclizations.

Visible Light Induced Rhodium(I)-Catalyzed C-H Borylation.

An efficient visible light induced rhodium(I)-catalyzed regioselective borylation of aromatic C-H bonds is reported. The photocatalytic system is based on a single NHC-RhI complex capable of both harvesting visible light and enabling the bond breaking/forming at room temperature. The chelating nature of the NHC-carboxylate ligand was critical to ensure the stability of the RhI complex and to provide excellent photocatalytic activities. Experimental mechanistic studies evidenced a photooxidative ortho C-H bond addition upon irradiation with blue LEDs, leading to a cyclometalated RhIII -hydride intermediate.