The Displacements Study of Birch Veneer Layers from Composition of Plywood during Water Jet Cutting Using the Finite Element Method (FEA).

This paper presents a study of the deformations of the birch veneer layer of plywood composed of veneer sheets, each with a thickness of 1.4 mm. Displacements in the longitudinal and transverse directions were analyzed in each layer of veneer from the composition of the board. Cutting pressure was applied to the surface equal to the diameter of the water jet, located in the center of the laminated wood board. Finite element analysis (FEA) does not study the breaking of the material or its elastic deformation, but only what happens from a static point of view when maximum pressure acts on the board, which causes detachment of the veneer particles. The results of the finite element analysis indicate maximum values of 0.0012 mm in the longitudinal direction of the board located in the proximity of the application of the maximum force of the water jet. Additionally, in order to analyze the recorded differences between both longitudinal and transversal displacements, estimation of statistical parameters with 95% confidence intervals (CI) was applied. The comparative results indicate that the differences are not significant for the displacements under study.

Reliability Estimation of Parameters of Helical Wind Turbine with Vertical Axis.

Due to the prolonged use of wind turbines they must be characterized by high reliability. This can be achieved through a rigorous design, appropriate simulation and testing, and proper construction. The reliability prediction and analysis of these systems will lead to identifying the critical components, increasing the operating time, minimizing failure rate, and minimizing maintenance costs. To estimate the produced energy by the wind turbine, an evaluation approach based on the Monte Carlo simulation model is developed which enables us to estimate the probability of minimum and maximum parameters. In our simulation process we used triangular distributions. The analysis of simulation results has been focused on the interpretation of the relative frequency histograms and cumulative distribution curve (ogive diagram), which indicates the probability of obtaining the daily or annual energy output depending on wind speed. The experimental researches consist in estimation of the reliability and unreliability functions and hazard rate of the helical vertical axis wind turbine designed and patented to climatic conditions for Romanian regions. Also, the variation of power produced for different wind speeds, the Weibull distribution of wind probability, and the power generated were determined. The analysis of experimental results indicates that this type of wind turbine is efficient at low wind speed.