Supercritical angle fluorescence for enhanced axial sectioning in STED microscopy.

We demonstrate subwavelength axial sectioning on biological samples with a stimulated emission depletion (STED) microscope combined with supercritical angle fluorescence (SAF) detection. SAF imaging is a powerful technique for imaging the membrane of the cell based on the direct exploitation of the fluorophore emission properties. Indeed, only when fluorophores are close to the interface can their evanescent near-field emission become propagative and be detected beyond the critical angle. Therefore, filtering out the SAF emission from the undercritical angle fluorescence (UAF) emission in the back focal plane of a high-NA objective lens permits nanometer axial sectioning of fluorescent emitters close to the coverslip. When combined with STED microscopy, a straightforward gain in axial resolution can be reached without any alteration of the STED beam path. Indeed, STED-SAF implementation only requires a modification in the detection path of the STED microscope and thus could be widely implemented.

Synthesis and Viscosimetric Behavior of Poly(acrylamide-co-2-acrylamido-2-methylpropanesulfonate) Obtained by Conventional and Adiabatic Gel Process via RAFT/MADIX Polymerization.

High molar masses homopolymers of both acrylamide (AM) and 2-acrylamido-2-methylpropanesulfonate (AMPS) as well as poly(AM-stat-AMPS) exhibiting a large range copolymer composition has been obtained via the optimization of a purely adiabatic gel process. Monomer concentrations ranging from 2.0 to 3.47 M have been successfully tested while keeping the control of the molar masses up to 5 × 106 g mol-1. The products have been characterized in terms of molecular mass and viscosimetric properties.

Combining 3D single molecule localization strategies for reproducible bioimaging.

Here, we present a 3D localization-based super-resolution technique providing a slowly varying localization precision over a 1 µm range with precisions down to 15 nm. The axial localization is performed through a combination of point spread function (PSF) shaping and supercritical angle fluorescence (SAF), which yields absolute axial information. Using a dual-view scheme, the axial detection is decoupled from the lateral detection and optimized independently to provide a weakly anisotropic 3D resolution over the imaging range. This method can be readily implemented on most homemade PSF shaping setups and provides drift-free, tilt-insensitive and achromatic results. Its insensitivity to these unavoidable experimental biases is especially adapted for multicolor 3D super-resolution microscopy, as we demonstrate by imaging cell cytoskeleton, living bacteria membranes and axon periodic submembrane scaffolds. We further illustrate the interest of the technique for biological multicolor imaging over a several-µm range by direct merging of multiple acquisitions at different depths.

Impact of Bacterial Membrane Fatty Acid Composition on the Failure of Daptomycin To Kill Staphylococcus aureus.

Daptomycin is a last-resort membrane-targeting lipopeptide approved for the treatment of drug-resistant staphylococcal infections, such as bacteremia and implant-related infections. Although cases of resistance to this antibiotic are rare, increasing numbers of clinical, in vitro, and animal studies report treatment failure, notably against Staphylococcus aureus The aim of this study was to identify the features of daptomycin and its target bacteria that lead to daptomycin treatment failure. We show that daptomycin bactericidal activity against S. aureus varies significantly with the growth state and strain, according to the membrane fatty acid composition. Daptomycin efficacy as an antibiotic relies on its ability to oligomerize within membranes and form pores that subsequently lead to cell death. Our findings ascertain that daptomycin interacts with tolerant bacteria and reaches its membrane target, regardless of its bactericidal activity. However, the final step of pore formation does not occur in cells that are daptomycin tolerant, strongly suggesting that it is incapable of oligomerization. Importantly, membrane fatty acid contents correlated with poor daptomycin bactericidal activity, which could be manipulated by fatty acid addition. In conclusion, daptomycin failure to treat S. aureus is not due to a lack of antibiotic-target interaction, but is driven by its capacity to form pores, which depends on membrane composition. Manipulation of membrane fluidity to restore S. aureus daptomycin bactericidal activity in vivo could open the way to novel antibiotic treatment strategies.

Aberration-accounting calibration for 3D single-molecule localization microscopy.

We propose a straightforward sample-based technique to calibrate the axial detection in 3D single-molecule localization microscopy. Using microspheres coated with fluorescent molecules, the calibration curves of point spread function-shaping or intensity-based measurements can be obtained over the imaging depth range. This experimental method takes into account the effect of the spherical aberration without requiring computational correction. We demonstrate its efficiency for astigmatic imaging in a 1.2 µm range above the coverslip.

Podosome Force Generation Machinery: A Local Balance between Protrusion at the Core and Traction at the Ring.

Determining how cells generate and transduce mechanical forces at the nanoscale is a major technical challenge for the understanding of numerous physiological and pathological processes. Podosomes are submicrometer cell structures with a columnar F-actin core surrounded by a ring of adhesion proteins, which possess the singular ability to protrude into and probe the extracellular matrix. Using protrusion force microscopy, we have previously shown that single podosomes produce local nanoscale protrusions on the extracellular environment. However, how cellular forces are distributed to allow this protruding mechanism is still unknown. To investigate the molecular machinery of protrusion force generation, we performed mechanical simulations and developed quantitative image analyses of nanoscale architectural and mechanical measurements. First, in silico modeling showed that the deformations of the substrate made by podosomes require protrusion forces to be balanced by local traction forces at the immediate core periphery where the adhesion ring is located. Second, we showed that three-ring proteins are required for actin polymerization and protrusion force generation. Third, using DONALD, a 3D nanoscopy technique that provides 20 nm isotropic localization precision, we related force generation to the molecular extension of talin within the podosome ring, which requires vinculin and paxillin, indicating that the ring sustains mechanical tension. Our work demonstrates that the ring is a site of tension, balancing protrusion at the core. This local coupling of opposing forces forms the basis of protrusion and reveals the podosome as a nanoscale autonomous force generator.

Confocal supercritical angle microscopy for cell membrane imaging.

We demonstrate subwavelength sectioning on biological samples with a conventional confocal microscope. This optical sectioning is achieved by the phenomenon of supercritical angle fluorescence, wherein only a fluorophore next to the interface of a refractive index discontinuity can emit propagating components of radiation into the so-called forbidden angles. The simplicity of this technique allows it to be integrated with a high numerical aperture confocal scanning microscope by only a simple modification on the detection channel. Confocal-supercritical angular fluorescence microscopy would be a powerful tool to achieve high-resolution surface imaging, especially for membrane imaging in biological samples.

Simultaneous optically sectioned fluorescence and optical coherence microscopy with full-field illumination.

Full-field optical coherence microscopy (FF-OCM) and optically sectioned fluorescence microscopy are two imaging techniques that are implemented here in a novel dual modality instrument. The two imaging modalities use a broad field illumination to acquire the entire field of view without raster scanning. Optical sectioning is achieved in both imaging modalities owing to the coherence gating property of light for FF-OCM, and a structured illumination setup for fluorescence microscopy. Complementary image data are provided by the dual modality instrument in the context of biological tissue screening. FF-OCM imaging modality shows the tissue microarchitecture, while fluorescence microscopy highlights specific tissue features with cellular-level resolution by using targeting contrast agents. Complementary tissue morphology and biochemical features could potentially improve the understanding of cellular functions and disease diagnosis.

Towards an optical biopsy for the diagnosis of breast cancer in vivo by endogenous fluorescence spectroscopy.

The techniques of medical imaging allow the detection of suspect lesions in the breast, but they do not always evidence the malignant nature of these lesions. Breast biopsies and histological analyses are therefore implemented to establish a diagnosis. In order to reduce the number of these invasive procedures, a portable clinical system was designed based upon the excitation of Endogenous Fluorescence in vivo at 405 nm via a fiber-optics probe included in a disposable needle of small diameter (<1 mm). From the fluorescence signal, the authors are able to discriminate between diseased and healthy areas of human breast biopsies. Stronger fluorescence intensity and systematic spectral red shift of the tumor areas were observed. These results are confirmed by confocal microscopy. This new instrument is promising for the minimally invasive diagnosis of breast tumors in vivo with an appreciable limitation of patient trauma and of operational and financial cost.

Determination of the macromolecular dimensions of hydrophobically modified polymers by micellar size exclusion chromatography coupled with multiangle light scattering.

The present work demonstrates that the use of a nonionic surfactant in the mobile phase together with light scattering coupled to size exclusion chromatography (SEC) provides an accurate determination of macromolecular dimensions of hydrophobically modified water-soluble polymer and polyelectrolyte, i.e., weight-average molar mass M(w) and polydispersity I(p). This method, called micellar SEC, is based on the dissociation of the aggregates in aqueous solution and the formation of mixed micelles between the surfactant and the polymer hydrophobic groups. The methodology and its application are presented for synthetic sulfonated polyacrylamides (5 and 20 mol %) modified with three hydrophobic alkyl side groups (C8, C12, and C18) and with Triton X-100 as a nonionic surfactant and are discussed according to the associativity of polymers. The results are compared to those obtained by classical SEC in 0.1 M NaNO(3) and by static light scattering in formamide solution.