High yield fabrication of low threshold single-mode GaAs/AlGaAs semiconductor ring lasers using metallic etch masks.

We demonstrate a novel high yield fabrication process for single-mode ridge-waveguide GaAs/AlGaAs ring lasers with significantly lower threshold currents than previously reported for similar devices. In this fabrication process, the ridge waveguide structure is patterned using a metallic etch mask, which survives ensuing fabrication steps to form a continuous metallic cover over the entire resonator structure. This metallic cover improves the uniformity of electrical contact between the resonator structure and the metallic biasing layer deposited at the conclusion of the fabrication process. This leads to optimum electrical pumping of the fabricated devices. This fabrication process also allows for the passivation of the ridge-waveguide device sidewalls and separation of the metallic biasing layer from the optical mode.

Fabrication of Large Area Fishnet Optical Metamaterial Structures Operational at Near-IR Wavelengths.

In this paper, we demonstrate a fabrication process for large area (2 mm × 2 mm) fishnet metamaterial structures for near IR wavelengths. This process involves: (a) defining a sacrificial Si template structure onto a quartz wafer using deep-UV lithography and a dry etching process (b) deposition of a stack of Au-SiO2-Au layers and (c) a 'lift-off' process which removes the sacrificial template structure to yield the fishnet structure. The fabrication steps in this process are compatible with today's CMOS technology making it eminently well suited for batch fabrication. Also, depending on area of the exposure mask available for patterning the template structure, this fabrication process can potentially lead to optical metamaterials spanning across wafer-size areas.