Temperature-Related Corrosion Resistance of AISI 1010 Carbon Steel in Sulfolane.

Sulfolane-induced corrosion can lead to severe impairment in industrial systems. Therefore, determination of solvent corrosivity is valid. Under standard conditions, pure sulfolane is considered to be thermally stable and chemically inert, hence non-aggressive towards carbon/stainless steel. Unfortunately, the sulfolane-evoked corrosion of the industrial installations is observed for sulfolane-based systems polluted by small quantities of oxygen, water and some oxidizing agents. Moreover, sulfolane decomposition with formation of corrosive (by-)products can be escalated by some process parameters, e.g., temperature. The main objective of this study was to determine the corrosion resistance of AISI 1010 steel immersed in sulfolane at temperatures ranging from 25 to 230 °C. Evaluation of the corrosion damage was carried out using electrochemical techniques and scanning probe/electron microscopy, respectively. The general corrosion tendency, corrosion rate and surface corrosion degree were taken into account as well. It was noticed that the corrosion rate linearly increases with the enhancement of sulfolane temperature. Moreover, the interfacial reaction of steel with sulfolane resulted in the formation of corrosion product layer, which is a physical barrier between the corrosive environment and steel improving corrosion resistance of the latter. In fact, the increment of the sulfolane temperature caused a gradual breakdown of the protective layer and the increase in the corrosion degree of the investigated steel. Finally, it was found that the corrosion degree doubles approximately every 42 °C.

Real-Time Corrosion Monitoring of AISI 1010 Carbon Steel with Metal Surface Mapping in Sulfolane.

Solvents are widely used in organic synthesis. Sulfolane is a five-membered heterocyclic organosulfur sulfone (R-SO2-R', where R/R' is alkyl, alkenyl, or aryl) and an anthropogenic medium commonly used as industrial extractive solvent in the liquid-liquid and liquid-vapor extraction processes. Under standard conditions sulfolane is not aggressive towards steel, but at higher temperatures and in oxygen, water, or chlorides presence, it can be decomposed into some corrosive (by-)products with generation of SO2 and subsequent formation of corrosive H2SO3. This pilot-case study provides data from laboratory measurements performed in low conductivity sulfolane-based fluids using an industrial multi-electrochemical technique for reliable detection of corrosion processes. In particular, a comprehensive evaluation of the aqueous phase impact on general and localized corrosion of AISI 1010 carbon steel in sulfolane is presented. Assessment of corrosive damage was carried out using an open circuit potential method, potentiodynamic polarization curves, SEM/EDS and scanning Kelvin probe technique. It was found that an increase in the water content (1-3 vol.%) in sulfolane causes a decrease in the corrosion resistance of AISI 1010 carbon steel on both uniform and pitting corrosion due to higher conductance of the sulfolane-based fluids.

Methotrexate and Cytarabine-Loaded Nanocarriers for Multidrug Cancer Therapy. Spectroscopic Study.

Determining the properties of nanoparticles obtained by novel methods and defining the scope of their application as drug carriers has important practical significance. This article presents the pioneering studies concerning high degree incorporation of cytarabine (AraC) and methotrexate (MTX) into liposome vesicles. The main focus of this study were cytarabine-methotrexate-dipalmitoylphosphatidylcholine (DPPC) interactions observed in the gel and fluid phases of DPPC bilayers. The proposed new method of use the Transmittance2919/2850 ratio presented in our research is sensitive to subtle changes in conformational order resulting from rotations, kinks and bends of the lipid chains. The transition temperatures characterized by Fourier Transform Infrared Spectroscopy (FT-IR) were consistent with the results obtained by Differential Scanning Calorimetry (DSC). Transmission Electron Microscopy (TEM) was used in order to determine the size and shape of the liposomes obtained. The mutual interactions occurring between the drugs studied and the phospholipids were analyzed using the Nuclear Magnetic Resonance (NMR).