Discharge Behaviour and Modelling of a 1.5T REBCO Magnet With Quench Tolerant Coils Impregnated with Conductive Epoxy.

We have designed and built a small, conduction cooled, 1.5 T high-temperature superconductor (HTS) magnet. The magnet coils have been wet-wound with a novel conductive epoxy resin system to achieve a derivative of the no-insulation coil winding method. The epoxy is filled with copper powder to reliably set the turn-to-turn contact resistivity and diamond powder to accurately space the coil turns apart, as well as match the filled epoxy thermal contraction rate to that of the HTS. The magnet is designed to act as a test bed to measure sudden discharge rates and hence validate models of coil behaviour using the filled epoxy system we have developed. A lumped-element electrical model was used to predict the coil contact resistivity needed to bring the magnetic field of the 1.5 T magnet down to a near-zero level within 0.5 s. The conductive epoxy blend was tuned to give a contact resistivity of 1 × 10-6 Ω m2, based on previous measurements of coil contact resistivity at 77 K. Once the magnet was wound and tested at 40 K, we found the magnet's sudden discharge time constant was 500 ms rather than 69 ms as was predicted from the 77 K measurements. The discrepancy was traced to the temperature dependence of the contact resistivity. With further testing of the individual coils this was accounted for and the model adjusted. The predicted discharge time was 2 s, in good agreement with the measured sudden discharge time of the magnet.

Mobile low field magnetic resonance hardware development.

Typically, NMR systems are bulky and expensive laboratory based equipment. For half a century after its scientific discovery taking NMR outside of a laboratory environment is still not a common practice due to the complexity of the underlining physical phenomena and its low sensitivity, to the myriad of technical challenges when integrating a complete system. The scarcity of compact and mobile NMR systems has prevented its proliferation into many other areas and applications. This paper describes the progress in the development of compact electronic spectrometers that we coupled with handheld sensors in order to provide complete mobile solutions. The key to this progress has been the modern advances in computing, electronics and permanent magnet technologies. Mobile NMR is now feasible as a valuable, non-invasive tool for industrial and medical applications. By leveraging the strengths of NMR, which is to probe at the molecular level and gain information about molecular structure, organisation, abundance and orientation, NMR is intrinsically suitable for non-destructive testing of a wide range of materials and their manufacturing processes. The development of complete NMR systems benefits from working across various disciplines and organisations. By embracing a collaborative approach we believe it will accelerate NMR technology to become more ubiquitous in the near future.

Evaluation of benchtop NMR Diffusion Ordered Spectroscopy for small molecule mixture analysis.

Diffusion Ordered Spectroscopy (DOSY) is an attractive method for analyzing chemical mixtures in the liquid state because it separates spectra by the molecular weight of the associated molecule. It has been compared with hyphenated chromatographic and analytical methods such LC-MS and has broad potential in servicing those same applications including forensics, reaction analysis, quality control, and fraud detection. Benchtop NMR can collect quality spectra on small molecules, however, lacks the chemical shift dispersion of high field instruments, can suffer from spectral overlap common in mixtures, and the diminished sensitivity of the lower field compounds these problems. In this work, we show that existing high field pulse sequences and processing methods perform well at 43 MHz. Spectra from molecular mixtures where the constituents had 20% differences in diffusion coefficients and significant overlap were able to be matched to a bespoke spectral library and identified correctly. In addition, spectra from mixtures with constituents that have severe overlap in the spectrum and differ by 50% in diffusion coefficients were also able to be match and identified correctly. The combination of benchtop NMR and easy implementation of modern pulse sequences and processing show promise of bringing these useful methods to chemistry laboratories in research and industrial environments.

Rheo-NMR studies of an enzymatic reaction: evidence of a shear-stable macromolecular system.

Understanding the effects of shear forces on biopolymers is key to understanding how biological systems function. Although currently there is good agreement between theoretical predictions and experimental measurements of the behavior of DNA and large multimeric proteins under shear flow, applying the same arguments to globular proteins leads to the prediction that they should only exhibit shear-induced conformational changes at extremely large shear rates. Nevertheless, contradictory experimental evidence continues to appear, and the effect of shear on these biopolymers remains contentious. Here, a custom-built rheo-NMR cell was used to investigate whether shear flow modifies enzyme action compared with that observed quiescently. Specifically, (1)H NMR was used to follow the kinetics of the liberation of methanol from the methylesterified polysaccharide pectin by pectinmethylesterase enzymes. Two different demethylesterifying enzymes, known to have different action patterns, were used. In all experiments performed, Couette flows with shear rates of up to 1570 s(-1) did not generate detectable differences in the rate of methanol liberation compared to unsheared samples. This study provides evidence for a shear-stable macromolecular system consisting of a largely beta-sheet protein and a polysaccharide, in line with current theoretical predictions, but in contrast to some other experimental work on other proteins.

Two-dimensional NMR spectroscopy in Earth's magnetic field.

We demonstrate the first two-dimensional correlation NMR (COSY) spectra obtained at ultra low frequencies (ULF) using the Earth's magnetic field. Using a specially developed spectrometer with multiple audio-frequency pulses under controlled pulse phase, we observe magnetisation transfer arising from heteronuclear J-couplings in trifluoroethanol and para-difluorobenzene. The 2D COSY spectra exhibit all diagonal and off-diagonal multiplets consistent with known J-couplings in these molecules.

A practical and flexible implementation of 3D MRI in the Earth's magnetic field.

The Earth's magnetic field, though weak, is appealing for NMR applications because it is highly homogeneous, globally available and free. However, the practicality of Earth's field NMR (EFNMR) has long been limited by the need to perform experiments in outdoor locations where the local field homogeneity is not disrupted by ferrous or magnetic objects and where ultra-low frequency (ULF) noise sources are at a minimum. Herein we present a flexible and practical implementation of MRI in the Earth's magnetic field that demonstrates that EFNMR is not as difficult as it was previously thought to be. In this implementation, pre-polarization and ULF noise shielding, achieved using a crude electromagnet, are used to significantly improve signal-to-noise ratio (SNR) even in relatively noisy environments. A three axis gradient coil set, in addition to providing imaging gradients, is used to provide first-order shims such that sub-hertz linewidths can routinely be achieved, even in locations of significant local field inhomogeneity such as indoor scientific laboratories. Temporal fluctuations in the magnitude of the Earth's magnetic field are measured and a regime found within which these variations in Larmor frequency produce no observable artefacts in reconstructed images.