Superior Performance of Iron-Coated Silver Nanoparticles and Cefoxitin as an Antibiotic Composite Against Methicillin-Resistant Staphylococcus aureus (MRSA): A Population Study.

The synergistic effects of antimicrobial nanostructures with antibiotics present a promising solution for overcoming resistance in methicillin-resistant Staphylococcus aureus (MRSA). Previous studies have introduced iron as a novel coating for silver nanoparticles (AgNPs) to enhance both economic efficiency and potency against S. aureus. However, there are currently no available data on the potential of these novel nanostructures to reverse MRSA resistance. To address this gap, a population study was conducted within the MRSA community, collecting a total of 48 S. aureus isolates from skin lesions. Among these, 21 isolates (43.75%) exhibited cefoxitin resistance as determined by agar disk diffusion assay. Subsequently, a PCR test confirmed the presence of the mecA gene in 20 isolates, verifying them as MRSA. These results highlight the cefoxitin disk diffusion susceptibility test as an accurate screening method for predicting mecA-mediated resistance in MRSA. Synergy tests were performed on cefoxitin, serving as a marker antibiotic, and iron-coated AgNPs (Fe@AgNPs) in a combination study using the checkerboard assay. The average minimal inhibitory concentration (MIC) and fractional inhibitory concentration (FIC) of cefoxitin were calculated as 11.55 mg/mL and 3.61 mg/mL, respectively. The findings indicated a synergistic effect (FIC index < 0.5) between Fe@AgNPs and cefoxitin against 90% of MRSA infections, while an additive effect (0.5 ≤ FIC index ≤ 1) could be expected in 10% of infections. These results suggest that Fe@AgNPs could serve as an economically viable candidate for co-administration with antibiotics to reverse resistance in MRSA infections within skin lesions. Such findings may pave the way for the development of future treatment strategies against MRSA infections.

The Impact of Amine-Functionalised Iron Oxide Nanoparticles on the Menaquinone-7 Isomer Profile and Production of the Bioactive Isomer.

The K family of vitamins includes a collection of molecules with different pharmacokinetic characteristics. Menaquinone-7 (MK-7) has the finest properties and is the most therapeutically beneficial due to its long plasma half-life and outstanding extrahepatic bioavailability. MK-7 exhibits cis-trans isomerism, and merely the all-trans form is biologically efficacious. Therefore, the remedial value of MK-7 end products is exclusively governed by the quantity of all-trans MK-7. Consumers favour fermentation for the production of MK-7; however, it involves several challenges. The low MK-7 yield and extensive downstream processing requirements increase production costs, resulting in an expensive final product that is not universally available. Bacterial cell immobilisation with iron oxide nanoparticles (IONs) can potentially address the limitations of MK-7 fermentation. Uncoated IONs tend to have low stability and can adversely affect cell viability; thus, amine-functionalised IONs, owing to their increased physicochemical stability and biocompatibility, are a favourable alternative. Nonetheless, employing biocompatible IONs for this purpose is only advantageous if the bioactive MK-7 isomer is obtained in the most significant fraction, exploring which formed the aim of this investigation. Two amine-functionalised IONs, namely 3-aminopropyltriethoxysilane (APTES)-coated IONs (IONs@APTES) and L-Lysine (L-Lys)-coated IONs (L-Lys@IONs), were synthesised and characterised, and their impact on various parameters was evaluated. IONs@APTES were superior, and the optimal concentration (300 [Formula: see text]g/mL) increased all-trans MK-7 production and improved its yield relative to the untreated cells by 2.3- and 3.1-fold, respectively. The outcomes of this study present an opportunity to develop an innovative and effective fermentation method that enhances the production of bioactive MK-7.

Surface modification of polycaprolactone nanofibers through hydrolysis and aminolysis: a comparative study on structural characteristics, mechanical properties, and cellular performance.

Hydrolysis and aminolysis are two main commonly used chemical methods for surface modification of hydrophobic tissue engineering scaffolds. The type of chemical reagents along with the concentration and treatment time are main factors that determine the effects of these methods on biomaterials. In the present study, electrospun poly (ℇ-caprolactone) (PCL) nanofibers were modified through hydrolysis and aminolysis. The applied chemical solutions for hydrolysis and aminolysis were NaOH (0.5-2 M) and hexamethylenediamine/isopropanol (HMD/IPA, 0.5-2 M) correspondingly. Three distinct incubation time points were predetermined for the hydrolysis and aminolysis treatments. According to the scanning electron microscopy results, morphological changes emerged only in the higher concentrations of hydrolysis solution (1 M and 2 M) and prolonged treatment duration (6 and 12 h). In contrast, aminolysis treatments induced slight changes in the morphological features of the electrospun PCL nanofibers. Even though surface hydrophilicity of PCL nanofibers was noticeably improved through the both methods, the resultant influence of hydrolysis was comparatively more considerable. As a general trend, both hydrolysis and aminolysis resulted in a moderate decline in the mechanical performance of PCL samples. Energy dispersive spectroscopy analysis indicated elemental changes after the hydrolysis and aminolysis treatments. However, X-ray diffraction, thermogravimetric analysis, and infrared spectroscopy results did not show noticeable alterations subsequent to the treatments. The fibroblast cells were well spread and exhibited a spindle-like shape on the both treated groups. Furthermore, according to the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, the surface treatment procedures ameliorated proliferative properties of PCL nanofibers. These findings represented that the modified PCL nanofibrous samples by hydrolysis and aminolysis treatments can be considered as the potentially favorable candidates for tissue engineering applications.

The Effect of Iron Oxide Nanoparticles on the Menaquinone-7 Isomer Composition and Synthesis of the Biologically Significant All-Trans Isomer.

Menaquinone-7 (MK-7) is the most therapeutically valuable K vitamin owing to its excellent bioavailability. MK-7 occurs as geometric isomers, and only all-trans MK-7 is bioactive. The fermentation-based synthesis of MK-7 entails various challenges, primarily the low fermentation yield and numerous downstream processing steps. This raises the cost of production and translates to an expensive final product that is not widely accessible. Iron oxide nanoparticles (IONPs) can potentially overcome these obstacles due to their ability to enhance fermentation productivity and enable process intensification. Nevertheless, utilisation of IONPs in this regard is only beneficial if the biologically active isomer is achieved in the greatest proportion, the investigation of which constituted the objective of this study. IONPs (Fe3O4) with an average size of 11 nm were synthesised and characterised using different analytical techniques, and their effect on isomer production and bacterial growth was assessed. The optimum IONP concentration (300 µg/mL) improved the process output and resulted in a 1.6-fold increase in the all-trans isomer yield compared to the control. This investigation was the first to evaluate the role of IONPs in the synthesis of MK-7 isomers, and its outcomes will assist the development of an efficient fermentation system that favours the production of bioactive MK-7.

Green Synthesized Iron-Coated Silver Nanoparticles: Economic Bimetallic Nanoparticles Potential Against Methicillin-Resistance Staphylococcus aureus.

Iron coating was introduced as one of the novel techniques to improve physicochemical and biological properties of silver nanoparticles (AgNPs). In the current experiment, impact of iron coating on the antimicrobial potency of AgNPs was investigated against methicillin-resistance Staphylococcus aureus (MRSA). To obtain more accurate data about the antimicrobial potency of examined nanostructures, the experiment was done on the 10 isolates of MRSA which were isolated from skin lesions. AgNPs and iron-coated AgNPs (Fe@AgNPs) were fabricated based on a green one-pot reaction procedure. Minimal inhibitory concentration (MIC) of Fe@AgNPs was not significantly different with MIC of AgNPs against eight out of 10 examined MRSA isolates. Also, by iron coating a reduction in the minimal inhibitory concentration (MIC) of AgNPs was observed against two MRSA isolates. The average MIC of AgNPs against 10 MRSA isolates was calculated to be 2.16 ± 0.382 mg/mL and this value was reduced to 1.70 ± 0.638 mg/mL for Fe@AgNPs. However, this difference was not considered significant statistically (P-value > 0.05). From productivity point of view, it was found that iron coating would improve the productivity of the synthesis reaction more than fivefold. Productivity of AgNPs was calculated to be 1.02 ± 0.07 g/L, meanwhile this value was 5.25 ± 0.05 g/L for Fe@AgNPs. Iron coating may provide another economic benefit to reduce final price of AgNPs. It is obvious that the price of a particular nanostructure made of silver and iron is significantly lower than that of pure silver. These findings can be considered for the fabrication of economic and potent antimicrobial nanoparticles.

Synthesis of mesoporous antimicrobial herbal nanomaterial-carrier for silver nanoparticles and antimicrobial sensing.

Herbal nanoparticles (HNPs) were introduced as a novel generation of antimicrobial nanoparticles. But in the battle against superbugs we need nanostructures with boosted antimicrobial potency. So in the current experiment, for the first time a green approach was developed for the silver functionalization of HNPs which were fabricated from an antimicrobial herb Thymus vulgaris. Silver functionalized HNPs (AgHNPs) were found to be mesoporous and were further fortified with antimicrobial compounds. The resulted structures were re-tested against MRSA and P. aeruginosa as superbugs. It was found that silver functionalization can provide eight-fold increase in the antimicrobial potency of HNPs. Moreover, MIC was reduced from 20 mg/mL to 2.5 mg/mL. Another eight-fold reduction in the MIC (0.3 mg/mL) was achieved by fortification with antimicrobial compounds. So, the antimicrobial potency of HNPs was successfully increase approximately up to 64-folds. Obtained results illustrated that silver functionalization and fortification with antimicrobial compounds can be considered as effective approaches to achieve HNPs with boosted antimicrobial potency. These nanostructures have the potency to be loaded with other antimicrobial compound such as antibiotics toward synergistic effects of AgNPs and antibiotics. Resulted nanostructures can be employed in the formulation of powerful topical and surface disinfectants against superbugs. Also, these particles can be considered as a next generation of boosted antimicrobial nanostructures.

A Study of L-Lysine-Stabilized Iron Oxide Nanoparticles (IONPs) on Microalgae Biofilm Formation of Chlorella vulgaris.

Despite iron-based nanoparticles gaining huge attraction in various field of sciences and technology, their application rises ecological concerns due to lack of studies on their interaction with microbial cells populations and communities, such as biofilms. In this study, Chlorella vulgaris cells were employed as a model of aquatic microalgae to investigate the impacts of L-lysine-coated iron oxide nanoparticles (lys@IONPs) on microalgal growth and biofilm formation. In this regard, C. vulgaris cells were exposed to different concentrations of lys@IONPs and the growth of cells was evaluated by OD600 and biofilm formation was analyzed using crystal violet staining throughout 12 days. It was revealed that low concentration of nanoparticles (< 400 µg/mL) can promote cell growth and biofilm formation. However, higher concentrations have an adverse effect on microalgal communities. It is interesting that microalgal growth and biofilm are concentration- and exposure time-dependent to lys@IONPs. Over long period (~ 12 days) exposure to high concentrations of nanoparticles, cells can adapt with the condition, so growth was raised and biofilm started to develop. Results of the present study could be considered in ecological issues and also bioprocesses using microalgal cells.

Impacts of Magnetic Immobilization on the Growth and Metabolic Status of Recombinant Pichia pastoris.

Downstream processing is an expensive step for industrial production of recombinant proteins. Cell immobilization is known as one of the ideal solutions in regard to process intensification. In recent years, magnetic immobilization was introduced as a new technique for cell immobilization. This technique was successfully employed to harvest many bacterial and eukaryotic cells. But there are no data about the influence of magnetic immobilization on the eukaryotic inducted recombinant cells. In this study, impacts of magnetic immobilization on the growth and metabolic status of induced recombinant Pichia pastoris as a valuable eukaryotic model cells were investigated. Results based on colony-forming unit, OD600, and trypan blue assay indicated that magnetic immobilization had no adverse effect on the growth and viability of P. pastoris cells. Also, about 20-40% increase in metabolic activity was recorded in immobilized cells that were decorated with 0.5-2 mg/mL nanoparticles. Total protein and carbohydrate of the cells were also measured as main indicatives for cell function and no significant changes were observed in the immobilized cells. Current data show magnetic immobilization as a biocompatible technique for application in eukaryotic expression systems. Results can be considered for further developments in P. pastoris-based expression systems.

Application of FeOOH Nano-Ellipsoids as a Novel Nano-Based Iron Supplement: an In Vivo Study.

The possibility of employing FeOOH nano-ellipsoids as a novel shape nano-based iron supplement was investigated. Ferrous sulfate and nano-ellipsoids were daily administered by gavage at low and high dosages. After 1 month of treatment, the hematologic parameters along with serum and organs' iron contents were measured. Liver enzymes, total serum bilirubin, and LDH level were assayed to evaluate any possible toxicity. More investigation was also performed by organ index calculation and also pathologic studies. It was found that nano-ellipsoids are an effective iron supplement to improve iron-related blood parameters. Interestingly, low-dose nano-ellipsoids were even more effective than high-dose ferrous sulfate. Nano-ellipsoids had no considerable impact on the liver enzymes and serum bilirubin. Meanwhile, high-dose ferrous sulfate significantly increases liver enzyme activity. The increased serum LDH was also the only concern in the groups that were treated with high-dose ferrous sulfate and nano-ellipsoids. Pathologic evaluations revealed some signs of liver inflammation after supplementation with high dose nano-ellipsoids and also ferrous sulfate. Overall, these data indicate FeOOH nano-ellipsoids as a novel shape iron supplement to be employed at low dosage but with greater beneficial effects than high-dose ferrous sulfate.

Iron nanoparticles as novel vaccine adjuvants.

The poor immunogenicity of peptide vaccines compared to conventional ones re usually improved by applying different adjuvants. As chemical or biological substances, adjuvants are added to vaccines to enhance and prolong the immune response. According to considerable investigations over the recent years in the context of finding new adjuvants, a handful of vaccine adjuvants have been licensed for human use. Recently, engineered nanoparticles (NPs) have been introduced as novel alternatives to traditional vaccine adjuvant. Metallic nanoparticles (MeNPs) are among the most promising NPs used for vaccine adjuvant as well as the delivery system that can improve immune responses against pathogens. Iron NPs, as an important class of MeNPs, have gained increasing attention as novel vaccine adjuvants. These particles have shown acceptable results in preclinical studies. Hence, understanding the physicochemical properties of iron NPs, including size, surface properties, charge and route of administration, is of substantial importance. The aim of this review is to provide an overview of the immunomodulatory effects of iron NPs as novel adjuvants. Furthermore, physicochemical properties of these NPs were also discussed.

Size Tuned Synthesis of FeOOH Nanorods toward Self-Assembled Nanoarchitectonics.

Various studies were performed to fabricate self-assembling nanoobjects out of noble metals, but a few efforts were made for engineering iron-based nanorods toward sell-assembling blocks. In this regard ß-FeOOH nanorods were fabricated in various sizes to achieve iron-based rod nanoblocks with self-assembling potential. Hydrolysis of ferric ions in various concentrations was successfully developed as a novel approach to control the growth of ß-FeOOH crystals and tuning the length of rods in the nano range, below 100 nm. It was found that the concentration of ferric ion has no effect on the widths of nanorods, but the length was affected. By increasing the concentration of ferric ions, an increase in the length of nanorods and an increase of aspect ratio occurred. All sizes of the resulting FeOOH nanorods exhibited mesoporous feature, but interestingly the hysteresis loops were different due to different pore patterns. In fact, pores on the larger particles were more uniform in size and shape. Nanorods of small length did not make suitable interactions toward ordered phase formation, but rods with the mean length of about 90 nm or longer, at a certain concentration, were able to form nematic phases. The large (∼+40 mV) zeta-potential of nanorods prevents formation of dense arrays, and just bundle-like structures were observed. These findings highlight the importance of size, surface charge, and concentration of nanoobjects in the formation of 3D structures. The developed technique in the fabrication of ß-FeOOH nanorods provides pure structures that are free from any size-controlling agent. These pure structures are suitable for further functionalization or coating. Self-assembling nanoobjects is a developing field in nanotechnology, and therefore studies can help our understanding over the assembling process.

Impacts of Magnetic Immobilization on the Recombinant Proteins Structure Produced in Pichia pastoris System.

Pichia pastoris expression system was introduced with post-translation process similar to higher eukaryotes. Preliminary studies were performed toward process intensification and magnetic immobilization of this system. In this experiment, effects of magnetic immobilization on the structure of recombinant protein were evaluated. P. pastoris cell which express human serum albumin (HSA) was used as a model. The cells were immobilized with various concentrations of APTES coated magnetite nanoparticles. HSA production was done over 5 days induction and structure of the product was analyzed by UV-vis, fluorescence, and ATR-FTIR spectroscopy. Second derivative deconvolution method was used to analyze the secondary structure of HSA. P. pastoris cell that were immobilized with 0.5 and 1 mg/mL of nanoparticles were produced HSA with intact structure. But immobilization with 2 mg/mL of nanoparticles resulted in some modifications in the secondary structures (i.e., α-helixes and ß-turns) of produced HSA. Based on these data, immobilization of P. pastoris cells with 0.5 or 1 mg/mL of nanoparticles is completely efficient for cell harvesting and has any effect on the structure of recombinant product. These findings revealed that decoration of microbial cells with high concentrations of nanoparticles has some impacts on the structure of secretory proteins.

The effect of iron oxide nanoparticles on Lactobacillus acidophilus growth at pH 4.

Probiotics, in particular, lactic acid bacteria (LAB) are widely used as starter cultures in food and pharmaceutical industries. Presence of LAB supports the production and preservation of a diverse range of food products, provides a positive effect on the human gastrointestinal tract, and prevents the progression of many diseases. However, the main limiting factor in the application of LAB is that they hardly survive in acidic conditions, including the human digestive system. This factor inhibits LAB to maintain their functionality and deliver their health benefits to the host. For this purpose, magnetic immobilisation of LAB with iron oxide nanoparticles (IONs) was conducted to evaluate the effect of IONs on bacterial growth and their viability at low pH. Gram-positive Lactobacillus acidophilus, a well-known species of LAB, was selected for this study. The IONs were successfully synthesised with the average size of 7 nm and used for decoration of L. acidophilus cells at low pH. Based on the results, a 1.8-fold increase in bacterial viability was observed by decorating cells with 360 µg/mL IONs.

Antibacterial activity of SPIONs versus ferrous and ferric ions under aerobic and anaerobic conditions: a preliminary mechanism study.

In modern medicine, major attention has been paid to superparamagnetic iron oxide nanoparticles (SPIONs). Recent studies have shown the antibacterial properties of SPIONs against some Gram-positive and Gram-negative bacterial strains. These nanoparticles (NPs) can bind to bacterial membranes via hydrophobic or electrostatic interactions and pass through cell barriers. In this study, the authors evaluated the antibacterial activity of magnetic NPs in comparison with ferrous and ferric ions. The level of reactive oxygen species (ROS) in the treated Staphylococcus aureus and Escherichia coli bacteria were directly measured by fluorometric detection. The results showed that iron ions and SPIONs had significant dependent antimicrobial activities. SPIONs showed greater inhibitory effects than ferrous and ferric ions against the growth of treated bacterial strains under anaerobic conditions, while in aerobic conditions, ferrous showed the strongest antibacterial activity. In anaerobic conditions, they observed the greatest ROS formation and lowest minimum inhibitory concentration in the SPION-treated group in comparison with the other groups. It seems that the release of iron ions from SPIONs and subsequent activation of ROS pathway are the main antibacterial mechanisms of action. Nevertheless, the greater antibacterial effect of SPIONs in anaerobic conditions represents other mechanisms involved in the antibacterial activity of these NPs.

Green and Economic Fabrication of Zinc Oxide (ZnO) Nanorods as a Broadband UV Blocker and Antimicrobial Agent.

Zinc oxide (ZnO) nanoparticles have gained widespread interest due to their unique properties, making them suitable for a range of applications. Several methods for their production are available, and of these, controlled synthesis techniques are particularly favourable. Large-scale culturing of Chlorella vulgaris produces secretory carbohydrates as a waste product, which have been shown to play an important role in directing the particle size and morphology of nanoparticles. In this investigation, ZnO nanorods were produced through a controlled synthesis approach using secretory carbohydrates from C. vulgaris, which presents a cost-effective and sustainable alternative to the existing techniques. Fourier transform infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD) analysis, transmission electron microscopy (TEM), and UV-Vis spectroscopy were used to characterise the nanorods. The prepared nanorods exhibited a broad range of UV absorption, which suggests that the particles are a promising broadband sun blocker and are likely to be effective for the fabrication of sunscreens with protection against both UVB (290-320 nm) and UVA (320-400 nm) radiations. The antimicrobial activity of the prepared nanorods against Gram-positive and Gram-negative bacteria was also assessed. The nanostructures had a crystalline structure and rod-like appearance, with an average length and width of 150 nm and 21 nm, respectively. The nanorods also demonstrated notable antibacterial activity, and 250 µg/mL was determined to be the most effective concentration. The antibacterial properties of the ZnO nanorods suggest its suitability for a range of antimicrobial uses, such as in the food industry and for various biomedical applications.

Enterobacter sp. Mediated Synthesis of Biocompatible Nanostructured Iron-Polysaccharide Complexes: a Nutritional Supplement for Iron-Deficiency Anemia.

FDA has approved iron oxide nanoparticles (IONs) coated with organic compounds as a safe material with less toxic effects compared with the naked metal ions and nanoparticles. In this study, the biological and physicochemical characteristics of a nanostructured iron-polysaccharide complexes (Nano-IPC) biosynthesized by Enterobacter sp. were evaluated. Furthermore, the serum biochemical parameters, tissue iron level, red blood cell parameters, and organ ferritin of rats were measured for investigating the effect of the Nano-IPCs in comparison with FeSO4 as a supplement for iron deficiency. The biosafety data demonstrated 35% increment of viability in Hep-G2 hepatocarcinoma cell lines when treated with nanoparticles (500 µg/mL) for 24 h. Besides, iron concentration in serum and tissue as well as the expression of ferritin L subunit in animals treated with the Nano-IPCs supplement were meaningfully higher than the FeSO4-supplemented and negative control animals. Moreover, the expression level of ferritin H subunit and biochemical factors remained similar to the negative control animals in the Nano-IPC-supplemented group. These results indicated that Nano-IPCs can be considered as a nontoxic supplement for patients carrying iron-deficiency anemia (IDA).

Impact of magnetic immobilization on the cell physiology of green unicellular algae Chlorella vulgaris.

Cell immobilization on the magnetic nanoparticles (MNPs) and magnetic harvesting is a novel approach for microalgal cells separation. To date, the effect of these nanoparticles on microalgal cells was only studied over a short period of time. More studies are hence needed for a better understanding of the magnetic harvesting proposes or environmental concerns relating to long-term exposure to nanoparticles. In this study, the impact of various concentrations of MNPs on the microalgal cells growth and their metabolic status was investigated over 12 days. More than 60% reduction in mitochondrial activity and pigments (chlorophyll a, chlorophyll b, and carotenoids) content occurred during the first 6 days of exposure to ≥50 µg/mL nanoparticles. However, more than 50% growth inhibitory effect was seen at concentrations higher than 400 µg/mL. Exposure to MNPs gradually induced cellular adaptation and after about 6 days of exposure to stress generating concentrations (˂400 µg/mL) of IONs, microalgae could overcome the imposed damages. This work provides a better understanding regarding the environmental impact of MNPs and appropriate concentrations of these particles for future algal cells magnetic immobilization and harvesting.

Immobilization of Cells by Magnetic Nanoparticles.

Cell harvesting is one of the main expensive, labor-intensive, and energy-consuming steps in downstream processing. Cell immobilization has introduced as a valuable strategy for process intensification in biotechnological industries. Here we describe magnetic immobilization as a promising and novel technique for cell immobilization by using magnetic nanoparticles. This technique is based on the decoration of cells with magnetic nanoparticles to make them sensitive to magnetic field. So, the cells can be harvested simply by applying a magnetic separator.

Magnetic Immobilization of Pichia pastoris Cells for the Production of Recombinant Human Serum Albumin.

Magnetic immobilization as a novel technique was used to immobilize recombinant Pichia pastoris (GS115 Albumin) cells to produce human serum albumin (HSA). In this regard, magnetic nanoparticles (MNPs) coated with amino propyl triethoxy silane (APTES) were synthesized. P. pastoris cells were decorated with MNPs via nonspecific interactions. Decorated cells were magneto-responsible and easily harvested by applying an external magnetic field. The efficiency of magnetic immobilization (Ei) for cell removal was in direct relation with the MNP concentration and time of exposure to the magnetic field. By increasing the nanoparticles concentration, cells were harvested in a shorter period. Complete cell removal (Ei ≈ 100) was achieved in ≥0.5 mg/mL of MNPs in just 30 s. HSA is produced in an extremely high cell density (OD ~20) and it is the first time that magnetic immobilization was successfully employed for harvesting such a thick cell suspension. After 5 days of induction the cells, which were immobilized with 0.25 to 1 mg/mL of nanoparticles, showed an increased potency for recombinant HSA production. The largest increase in HSA production (38.1%) was achieved in the cells that were immobilized with 0.5 mg/mL of nanoparticles. These results can be considered as a novel approach for further developments in the P. pastoris-based system.

Controlled synthesis of iron oxyhydroxide (FeOOH) nanoparticles using secretory compounds from Chlorella vulgaris microalgae.

FeOOH nanoparticles are commonly synthesized at very high temperature and pressure that makes the process energy consuming and non-economic. Recently, novel approaches were developed for the fabrication of these particles at room temperature. But, the main problem with these methods is that the prepared structures are aggregates of ultra-small nanoparticles where no intact separate nanoparticles are formed. In this study, for the first time, secretory compounds from Chlorella vulgaris cells were employed for the controlled synthesis of FeOOH nanoparticles at room atmosphere. Obtained particles were found to be goethite (α-FeO(OH)) crystals. Controlled synthesis of FeOOH nanoparticles resulted in uniform spherical nanoparticles ranging from 8 to 17 nm in diameter with 12.8 nm mean particle size. Fourier-transform infrared and elemental analyses were indicated that controlled synthesized nanoparticles have not functionalized with secretory compounds of C. vulgaris, and these compounds just played a controlling role over the synthesis reaction.