High-altitude glacier archives lost due to climate change-related melting.

Global warming has caused widespread surface lowering of mountain glaciers. By comparing two firn cores collected in 2018 and 2020 from Corbassière glacier in Switzerland, we demonstrate how vulnerable these precious archives of past environmental conditions have become. Within two years, the soluble impurity records were destroyed by melting. The glacier is now irrevocably lost as an archive for reconstructing major atmospheric aerosol components.

Magnetic Resonance Force Microscopy with a One-Dimensional Resolution of 0.9 Nanometers.

Magnetic resonance force microscopy (MRFM) is a scanning probe technique capable of detecting MRI signals from nanoscale sample volumes, providing a paradigm-changing potential for structural biology and medical research. Thus far, however, experiments have not reached sufficient spatial resolution for retrieving meaningful structural information from samples. In this work, we report MRFM imaging scans demonstrating a resolution of 0.9 nm and a localization precision of 0.6 nm in one dimension. Our progress is enabled by an improved spin excitation protocol furnishing us with sharp spatial control on the MRFM imaging slice, combined with overall advances in instrument stability. From a modeling of the slice function, we expect that our arrangement supports spatial resolutions down to 0.3 nm given sufficient signal-to-noise ratio. Our experiment demonstrates the feasibility of subnanometer MRI and realizes an important milestone toward the three-dimensional imaging of macromolecular structures.

Gate-controlled phase switching in a parametron.

The parametron, a resonator-based logic device, is a promising physical platform for emerging computational paradigms. When the parametron is subject to both parametric pumping and external driving, complex phenomena arise that can be harvested for applications. In this paper, we experimentally demonstrate deterministic phase switching of a parametron by applying frequency tuning pulses. To our surprise, we find different regimes of phase switching due to the interplay between a parametric pump and an external drive. We provide full modeling of our device with numerical simulations and find excellent agreement between model and measurements. Our result opens up new possibilities for fast and robust logic operations within large-scale parametron architectures.

Nanoladder Cantilevers Made from Diamond and Silicon.

We present a "nanoladder" geometry that minimizes the mechanical dissipation of ultrasensitive cantilevers. A nanoladder cantilever consists of a lithographically patterned scaffold of rails and rungs with feature size ∼100 nm. Compared to a rectangular beam of the same dimensions, the mass and spring constant of a nanoladder are each reduced by roughly 2 orders of magnitude. We demonstrate a low force noise of 158-42+62 zN and 190-33+42 zN in a 1 Hz bandwidth for devices made from silicon and diamond, respectively, measured at temperatures between 100-150 mK. As opposed to bottom-up mechanical resonators like nanowires or nanotubes, nanoladder cantilevers can be batch-fabricated using standard lithography, which is a critical factor for applications in scanning force microscopy.

Prenatal and adult androgen activities in alcohol dependence.

OBJECTIVE: Alcohol dependence is more prevalent in men than in women. The evidence for how prenatal and adult androgens influence alcohol dependence is limited. We investigated the effects of prenatal and adult androgen activity on alcohol dependence. Moreover, we studied how the behaviours of pregnant women affect their children's prenatal androgen load. METHOD: We quantified prenatal androgen markers (e.g., second-to-fourth finger length ratio [2D : 4D]) and blood androgens in 200 early-abstinent alcohol-dependent in-patients and 240 controls (2013-2015, including a 12-month follow-up). We also surveyed 134 women during pregnancy (2005-2007) and measured the 2D : 4D of their children (2013-2016). RESULTS: The prenatal androgen loads were higher in the male alcohol-dependent patients compared to the controls (lower 2D : 4D, P = 0.004) and correlated positively with the patients' liver transaminase activities (P < 0.001) and alcohol withdrawal severity (P = 0.019). Higher prenatal androgen loads and increasing androgen levels during withdrawal predicted earlier and more frequent 12-month hospital readmission in alcohol-dependent patients (P < 0.005). Moreover, stress levels (P = 0.002), alcohol (P = 0.010) and tobacco consumption (P = 0.017), and lifetime stressors (P = 0.019) of women during pregnancy related positively to their children's prenatal androgen loads (lower 2D : 4D). CONCLUSION: Androgen activities in alcohol-dependent patients and behaviours of pregnant women represent novel preventive and therapeutic targets of alcohol dependence.

Nanoscale Imaging of Current Density with a Single-Spin Magnetometer.

Charge transport in nanostructures and thin films is fundamental to many phenomena and processes in science and technology, ranging from quantum effects and electronic correlations in mesoscopic physics, to integrated charge- or spin-based electronic circuits, to photoactive layers in energy research. Direct visualization of the charge flow in such structures is challenging due to their nanometer size and the itinerant nature of currents. In this work, we demonstrate noninvasive magnetic imaging of current density in two-dimensional conductor networks including metallic nanowires and carbon nanotubes. Our sensor is the electronic spin of a diamond nitrogen-vacancy center attached to a scanning tip and operated under ambient conditions. Using a differential measurement technique, we detect DC currents down to a few µA with a current density noise floor of ∼2 × 104 A/cm2. Reconstructed images have a spatial resolution of typically 50 nm, with a best-effort value of 22 nm. Current density imaging offers a new route for studying electronic transport and conductance variations in two-dimensional materials and devices, with many exciting applications in condensed matter physics and materials science.

Ice-core evidence of earliest extensive copper metallurgy in the Andes 2700 years ago.

The importance of metallurgy for social and economic development is indisputable. Although copper (Cu) was essential for the wealth of pre- and post-colonial societies in the Andes, the onset of extensive Cu metallurgy in South America is still debated. Comprehensive archaeological findings point to first sophisticated Cu metallurgy during the Moche culture ~200-800 AD, whereas peat-bog records from southern South America suggest earliest pollution potentially from Cu smelting as far back as ~2000 BC. Here we present a 6500-years Cu emission history for the Andean Altiplano, based on ice-core records from Illimani glacier in Bolivia, providing the first complete history of large-scale Cu smelting activities in South America. We find earliest anthropogenic Cu pollution during the Early Horizon period ~700-50 BC, and attribute the onset of intensified Cu smelting in South America to the activities of the central Andean Chiripa and Chavin cultures ~2700 years ago. This study provides for the first time substantial evidence for extensive Cu metallurgy already during these early cultures.

Stress system dysregulation in pediatric generalized anxiety disorder associated with comorbid depression.

Because chronic stress is an important risk factor for anxiety states and depressive disorders, we studied hypothalamus-pituitary-adrenal (HPA) axis and sympathetic system activity via changes in cortisol and alpha amylase activity levels in pediatric generalized anxiety disorder (GAD) patients (n = 26) with comorbid depression and a healthy comparison group (n = 26). Morning plasma cortisol and diurnal profiles of salivary cortisol and salivary alpha amylase (sAA) activity were assessed, also reactivity of HPA-axis, sAA activity, and heart rate following a psychosocial stressor (Trier Social Stress Test for children). GAD patients with comorbid depression showed increased morning plasma and salivary cortisol levels, ameliorating throughout in-patient treatment, and higher sAA activity in their diurnal profile. Both HPA and sympathetic activity positively correlated with the severity of anxiety and depression. We also demonstrated a blunted HPA and sympathetic response to acute stress in patients. This pattern of neuroendocrine and sympathetic changes seems to be distinct from the one previously reported in pediatric patients with only social anxiety or depressive disorders. We propose morning plasma and saliva cortisol levels as potential physiological indicators for supporting the evaluation of symptoms' severity and treatment progress in children with GAD and comorbid depressive disorder.

Ultrasensitive mechanical detection of magnetic moment using a commercial disk drive write head.

Sensitive detection of weak magnetic moments is an essential capability in many areas of nanoscale science and technology, including nanomagnetism, quantum readout of spins and nanoscale magnetic resonance imaging. Here we show that the write head of a commercial hard drive may enable significant advances in nanoscale spin detection. By approaching a sharp diamond tip to within 5 nm from a write pole and measuring the induced diamagnetic moment with a nanomechanical force transducer, we demonstrate a spin sensitivity of 0.032 µB Hz(-1/2), equivalent to 21 proton magnetic moments. The high sensitivity is enabled in part by the pole's strong magnetic gradient of up to 28 × 10(6) T m(-1) and in part by the absence of non-contact friction due to the extremely flat writer surface. In addition, we demonstrate quantitative imaging of the pole field with ∼10 nm spatial resolution. We foresee diverse applications for write heads in experimental condensed matter physics, especially in spintronics, ultrafast spin manipulation and mesoscopic physics.

Nanotube mechanical resonators with quality factors of up to 5 million.

Carbon nanotube mechanical resonators have attracted considerable interest because of their small mass, the high quality of their surfaces, and the pristine electronic states they host. However, their small dimensions result in fragile vibrational states that are difficult to measure. Here, we observe quality factors Q as high as 5 × 10(6) in ultra-clean nanotube resonators at a cryostat temperature of 30 mK, where we define Q as the ratio of the resonant frequency over the linewidth. Measuring such high quality factors requires the use of an ultra-low-noise method to rapidly detect minuscule vibrations, as well as careful reduction of the noise of the electrostatic environment. We observe that the measured quality factors fluctuate because of fluctuations of the resonant frequency. We measure record-high quality factors, which are comparable to the highest Q values reported in mechanical resonators of much larger size, a remarkable result considering that reducing the size of resonators is usually concomitant with decreasing quality factors. The combination of ultra-low mass and very large Q offers new opportunities for ultra-sensitive detection schemes and quantum optomechanical experiments.

Atomic monolayer deposition on the surface of nanotube mechanical resonators.

We study monolayers of noble gas atoms (Xe, Kr, Ar, and Ne) deposited on individual ultraclean suspended nanotubes. For this, we record the resonance frequency of the mechanical motion of the nanotube, since it provides a direct measure of the coverage. The latter is the number of adsorbed atoms divided by the number of the carbon atoms of the suspended nanotube. Monolayers form when the temperature is lowered in a constant pressure of noble gas atoms. The coverage of Xe monolayers remains constant at 1/6 over a large temperature range. This finding reveals that Xe monolayers are solid phases with a triangular atomic arrangement, and are commensurate with the underlying carbon nanotube. By comparing our measurements to theoretical calculations, we identify the phases of Ar and Ne monolayers as fluids, and we tentatively describe Kr monolayers as solid phases. These results underscore that mechanical resonators made from single nanotubes are excellent probes for surface science.

Symmetry breaking in a mechanical resonator made from a carbon nanotube.

Nanotubes behave as semi-flexible polymers in that they can bend by a sizeable amount. When integrating a nanotube in a mechanical resonator, the bending is expected to break the symmetry of the restoring potential. Here we report on a new detection method that allows us to demonstrate such symmetry breaking. The method probes the motion of the nanotube resonator at nearly zero-frequency; this motion is the low-frequency counterpart of the second overtone of resonantly excited vibrations. We find that symmetry breaking leads to the spectral broadening of mechanical resonances, and to an apparent quality factor that drops below 100 at room temperature. The low quality factor at room temperature is a striking feature of nanotube resonators whose origin has remained elusive for many years. Our results shed light on the role played by symmetry breaking in the mechanics of nanotube resonators.

Ultrasensitive force detection with a nanotube mechanical resonator.

Since the advent of atomic force microscopy, mechanical resonators have been used to study a wide variety of phenomena, including the dynamics of individual electron spins, persistent currents in normal metal rings and the Casimir force. Key to these experiments is the ability to measure weak forces. Here, we report on force sensing experiments with a sensitivity of 12 zN Hz(-1/2) at a temperature of 1.2 K using a resonator made of a carbon nanotube. An ultrasensitive method based on cross-correlated electrical noise measurements, in combination with parametric downconversion, is used to detect the low-amplitude vibrations of the nanotube induced by weak forces. The force sensitivity is quantified by applying a known capacitive force. This detection method also allows us to measure the Brownian vibrations of the nanotube down to cryogenic temperatures. Force sensing with nanotube resonators offers new opportunities for detecting and manipulating individual nuclear spins as well as for magnetometry measurements.

Strong coupling between mechanical modes in a nanotube resonator.

We report on the nonlinear coupling between the mechanical modes of a nanotube resonator. The coupling is revealed in a pump-probe experiment where a mode driven by a pump force is shown to modify the motion of a second mode measured with a probe force. In a second series of experiments, we actuate the resonator with only one oscillating force. Mechanical resonances feature exotic line shapes with reproducible dips, peaks, and jumps when the measured mode is commensurate with another mode with a frequency ratio of either 2 or 3. Conventional line shapes are recovered by detuning the frequency ratio using the voltage on a nearby gate electrode. The exotic line shapes are attributed to strong coupling between the mechanical modes. The possibility to control the strength of the coupling with the gate voltage holds promise for various experiments, such as quantum manipulation, mechanical signal processing, and the study of the quantum-to-classical transition.

A nanomechanical mass sensor with yoctogram resolution.

Nanomechanical resonators have been used to weigh cells, biomolecules and gas molecules, and to study basic phenomena in surface science, such as phase transitions and diffusion. These experiments all rely on the ability of nanomechanical mass sensors to resolve small masses. Here, we report mass sensing experiments with a resolution of 1.7 yg (1 yg = 10(-24) g), which corresponds to the mass of one proton. The resonator is a carbon nanotube of length ∼150 nm that vibrates at a frequency of almost 2 GHz. This unprecedented level of sensitivity allows us to detect adsorption events of naphthalene molecules (C(10)H(8)), and to measure the binding energy of a xenon atom on the nanotube surface. These ultrasensitive nanotube resonators could have applications in mass spectrometry, magnetometry and surface science.

Nonlinear damping in mechanical resonators made from carbon nanotubes and graphene.

The theory of damping is discussed in Newton's Principia and has been tested in objects as diverse as the Foucault pendulum, the mirrors in gravitational-wave detectors and submicrometre mechanical resonators. In general, the damping observed in these systems can be described by a linear damping force. Advances in nanofabrication mean that it is now possible to explore damping in systems with one or more atomic-scale dimensions. Here we study the damping of mechanical resonators based on carbon nanotubes and graphene sheets. The damping is found to strongly depend on the amplitude of motion, and can be described by a nonlinear rather than a linear damping force. We exploit the nonlinear nature of damping in these systems to improve the figures of merit for both nanotube and graphene resonators. For instance, we achieve a quality factor of 100,000 for a graphene resonator.

Gate-tunable split Kondo effect in a carbon nanotube quantum dot.

We show a detailed investigation of the split Kondo effect in a carbon nanotube quantum dot with multiple gate electrodes. Two conductance peaks, observed at finite bias in nonlinear transport measurements, are found to approach each other for increasing magnetic field, to result in a recovered zero bias Kondo resonance at finite magnetic field. Surprisingly, in the same charge state, but under different gate configurations, the splitting does not disappear for any value of the magnetic field, but we observe an avoided crossing. We think that our observations can be understood in terms of a two-impurity Kondo effect with two spins coupled antiferromagnetically. The exchange coupling between the two spins can be influenced by a local gate, and the non-recovery of the Kondo resonance for certain gate configurations is explained by the existence of a small antisymmetric contribution to the exchange interaction between the two spins.

Even-odd effect in Andreev transport through a carbon nanotube quantum dot.

We have measured the current (I)-voltage (V) characteristics of a single-wall carbon nanotube quantum dot coupled to superconducting source and drain contacts in the intermediate coupling regime. Whereas the enhanced differential conductance dI/dV due to the Kondo resonance is observed in the normal state, this feature around zero-bias voltage is absent in the superconducting state. Nonetheless, a pronounced even-odd effect appears at finite bias in the dI/dV subgap structure caused by Andreev reflection. The first-order Andreev peak appearing around V=Delta/e is markedly enhanced in gate-voltage regions, in which the charge state of the quantum dot is odd. This enhancement is explained by a "hidden" Kondo resonance, pinned to one contact only. A comparison with a single-impurity Anderson model, which is solved numerically in a slave-boson mean-field approach, yields good agreement with the experiment.

Phase diagram and adsorption-desorption kinetics of CO on Ru(0001) from first principles.

A kinetic lattice gas model is used to study the equilibrium properties and the desorption kinetics of CO on Ru(0001). The authors compute all relevant on-site binding and interaction energies of CO molecules within density functional theory and import them in two different models. The first model allows the CO molecules to adsorb upright on top and hollow sites. The authors calculate the phase diagram, coverage isobars, and temperature programed desorption spectra. Up to a coverage of 1/3 ML, very good agreement is obtained between theory and experiment when considering top sites only. For coverages beyond 1/3 ML, hollow sites are included and disagreement between theory and experiment occurs. The second model allows adsorption on top sites only but allows them to tilt and shift from their upright positions. The authors show that this model resolves many of the deficiencies of their first one. Furthermore, the authors demonstrate that this model is more consistent with experiment since it is the only model that is able to explain the results from IR-spectroscopy experiments.

Ab initio based tight-binding molecular dynamics simulation of the sticking and scattering of O2Pt(111).

The sticking and scattering of O(2)Pt(111) has been studied by tight-binding molecular dynamics simulations based on an ab initio potential energy surface. We focus, in particular, on the sticking probability as a function of the angle of incidence and the energy and angular distributions in scattering. Our simulations provide an explanation for the seemingly paradox experimental findings that adsorption experiments suggest that the O(2)Pt(111) interaction potential should be strongly corrugated while scattering experiments indicate a rather small corrugation. The potential energy surface is indeed strongly corrugated which leads to a pronounced dependence of the sticking probability on the angle of incidence. The scattered O(2) molecules, however, experience a rather flat surface due to the fact that they are predominantly scattered at the repulsive tail of the potential.