Micellar HPLC and derivative spectrophotometric methods for the simultaneous determination of fluconazole and tinidazole in pharmaceuticals and biological fluids.

Micellar high-performance liquid chromatography (HPLC) and first-derivative ultraviolet spectrophotometry were used to simultaneously determine fluconazole (FLZ) and tinidazole (TNZ) in combined pharmaceutical dosage forms. The derivative procedure is based on the linear relationship between the drug concentration and the first derivative amplitudes at 220 and 288 nm for FLZ and TNZ, respectively. The calibration graphs were linear in the range of 1.5-9.0 µg/mL for FLZ and 10.0-60.0 µg/mL for TNZ. Furthermore, an HPLC procedure with ultraviolet detection at 210 nm was developed. For the HPLC procedure, good chromatographic separation was achieved using an ODS C18 column (250 × 4.6 mm i.d.). The mobile phase containing 0.15M sodium dodecyl sulphate, 0.3% triethylamine and 12% n-propanol in 0.02M orthophosphoric acid at pH 5.5 was pumped at a flow rate of 1 mL/min. Indapamide was used as an internal standard. The method showed good linearity over the concentration ranges of 1.5-30.0 and 10.0-200.0 µg/mL, with limits of detection of 0.36 and 2.70 µg/mL and limits of quantification of 1.1 and 8.2 µg/mL for FLZ and TNZ, respectively. The suggested methods were successfully applied for the simultaneous analysis of the drugs in their laboratory prepared mixture, co-formulated tablet and single dosage forms. Moreover the second method was also extended to the determination of the drugs in biological fluids.

Stability-Indicating Spectrofluorimetric Methods for the Determination of Metolazone and Xipamide in Their Tablets. Application to Content Uniformity Testing.

A highly sensitive, simple and rapid stability-indicating spectrofluorimetric method was developed for the determination of metolazone (MET) and xipamide (XPM) in their tablets. The proposed method is based on the measurement of the native fluorescence of MET in methanol at 437 nm after excitation at 238 nm and XPM in alkaline methanolic solution at 400 nm after excitation at 255 nm. The fluorescence-concentration plots were rectilinear over the range of 2.0- 20.0 ng/mL for MET and 0.2- 2.0 µg/mL for XPM, with lower detection limits (LOD) of 0.35 ng/mL and 0.02 µg/mL and a lower quantification limit (LOQ) of 1.05 ng/mL and 0.07 µg/mL for MET and XPM, respectively. The method was successfully applied to the analysis of MET and XPM in their commercial tablets and the results were in good agreement with those obtained using the official and comparison methods, respectively. Furthermore, content uniformity testing of the studied pharmaceutical tablets was also conducted. The application of the proposed method was extended to stability studies of MET and XPM after exposure to different forced degradation conditions, such as acidic, alkaline, oxidative and photolytic degradation conditions, according to ICH Guidelines. Moreover, the method was utilized to investigate the kinetics of the alkaline, acidic and photolytic degradation of MET. The apparent first-order rate constants and half-life times were calculated. Proposals for the degradation pathways for both MET and XPM were postulated.

Spectrofluorimetric determination of terbinafine hydrochloride and linezolid in their dosage forms and human plasma.

A highly sensitive, simple and rapid spectrofluorimetric method was developed for the determination of Terbinafine HCl (TRH) and linezolid (LNZ) in their pharmaceutical formulations. The proposed method is based on measuring the native fluorescence of the studied drugs in water at 336 nm after excitation at 275 nm for TRH and 375 nm after excitation at 254 nm for LNZ. The fluorescence-concentration plots were rectilinear over the range of 0.02-0.15 µg/mL for TRH and 0.5-5.0 µg/mL for LNZ. With lower detection limits of 3.0 and 110.0 ng/mL and a lower quantification limit of 9.0 and 320.0 ng/mL for TRH and LNZ, respectively. The method was successfully applied to the analysis of TRH in its commercial tablets, cream, gel and spray formulations and the results were in good agreement with those obtained with the official method. In addition the method was also applied to the analysis of LNZ in its capsule and I.V solution and the results were in good agreement with those obtained with the comparison method. The effect of sensitizers was studied. The method was extended to the determination of the studied drugs in spiked human plasma and the results were satisfactory.

Isotherms in ion exchange as obtained from break-through curves. II. Simple isotherms.

Isotherms for ion exchange equilibria can be obtained from break-through curves. The present work is concerned with experimental results from resin analyte combinations without selectivity reversal.