Facile Preparation of Cellulose Fiber Reinforced Polypropylene Using Hybrid Filler Method.

Dried hybrid fillers comprised of silica/CNF were successfully synthesized in ethanol/water mixed solvents at room temperature without the usage of any precursor. The as-prepared fillers were incorporated with polypropylene (PP) as a polymer matrix through a twin-screw extruder. From surface morphology analysis, the agglomeration of the silica/CNF hybrid fillers was prevented in the PP matrix and they exhibited moderate transparency, around 17.9% and 44.6% T at 660 nm. Further, the chemical structures of the polymer composites were identified by Fourier transform infrared (FT-IR) analysis. According to thermogravimetric analysis (TGA), the insertion of silica as a co-filler to the PP matrix resulted in an increase in its degradation onset temperature and also thermal stability. In addition, the mechanical properties of the PP composites also increased after the blending process with the hybrid fillers. Overall, sample PP-SS/CNF exhibited the highest tensile strength, which was 36.8 MPa, or around 73.55% compared to the pristine PP. The improvements in tensile strength were attributed to good dispersion and enhanced efficiency of the stress transfer mechanism between the silica and the cellulose within the PP matrix. However, elongation of the sample was reduced sharply due to the stiffening effect of the filler.

Development of Organo-Dispersible Graphene Oxide via Pseudo-Surface Modification for Thermally Conductive Green Polymer Composites.

Graphene has attracted lots of researchers attention because of its remarkable conductivity in both electrically and thermally. However, it has poor dispersibility in organic solvents which limited its applications. Polymers with aromatic end group which act as an intercalator were prepared by ring-opening polymerization with ε-caprolactone by utilizing 1-naphthalene methanol (1-NM) as an initiator. These intercalators will exist between graphene oxide (GO) sheets to prevent aggregation via interactions. The attachment of 1-NM on polymer chains was supported by ultraviolet-visible spectra, size exclusion chromatography profiles, and 1H nuclear magnetic resonance spectra. Exfoliated structured functionalized GO (fGO)/polycaprolactone (PCL) (synthesized fGO) nanocomposites that dispersed well in acetone, chloroform, N,N-dimethylformamide, dimethyl sulfoxide, tetrahydrofuran, and toluene were successfully synthesized. This agreed well with the enlarged interlayer spacing in the optimized fGO as compared to that of GO from density functional theory simulations using the DMol3 module that implemented in the Materials Studio 6.0. Furthermore, its potential to be applied as green electronics in electronics, aerospace, and automotive industries was presented, by trailering the thermal conductivity enhancement from the incorporation of fGO/PCL with commercialized biodegradable polymers, PCL, and poly[(R)-3-hydroxybutyric acid].

Simple Manufacture of Surface-Modified Nanolignocellulose Fiber via Vapor-Phase-Assisted Surface Polymerization.

This work tackles the disadvantages in the production of functionalized nanofibers from biomass and offers a new methodology to nanofiber-reinforced composite manufacturing. A vapor-phase-assisted surface polymerization (VASP) method has been used to develop surface-modified lignocellulosic nanofibers. Through the vaporized monomers during polymerization, the polymer chains can be introduced deep within oil palm mesocarp fibers (OPMFs) due to their unique porous structure. After OPMFs are modified with polymer chains, the simple Mortar grinder mill-ionic liquid (M-IL) method provides fibrillation from the macro- to nanoscale, retaining the grafted polymer chains. This approach for the functionalization of biomass could lead to the large-scale fabrication of surface-modified nanofibers for reinforced materials and promote innovative implementations of the renewable biomass resource.

Design of biodegradable PCL/PI films as a joining tape for grafting plant.

In this study, novel eco-friendly blends based on environmental-friendly polymers and compatibilizers, such as poly(ϵ-caprolactone) (PCL), cis-1,4-polyisoprene (PI), soybean lecithin (SOLE) and acrylated-epoxidized soybean oil (AESO), have been prepared in order to suggest a biodegradable joining tool used for plant grafting in agriculture, which will be competitive from the environment and economic points of view against conventional nonbiodegradable tools. PCL/PI blends, in which the portion of PCL was 75 and 50, were mixed with a compatibilizer by a melt-blending technique. The resulting blends were investigated by thermogravimetric analysis, differential scanning calorimetry and scanning electron microscopy and also their mechanical properties were determined. Afterwards, the blend films were buried in the soil. Remarkable level of weight loss was achieved in 6 weeks, ∼46%. The results showed that the addition of SOLE helped to improve the compatibility between PCL and PI due to its amphipathic property, and, besides, accelerated the weight loss of the films in soil, increasing microorganism growth on the film.