Rheological properties of calcium carbonate self-setting injectable paste.

With the development of minimally invasive surgical techniques, there is growing interest in the research and development of injectable biomaterials with controlled rheological properties. In this context, the rheological properties and injectability characteristics of an original CaCO(3) self-setting paste have been investigated. Two complementary rheometrical procedures have been established using a controlled stress rheometer to follow the structure build-up at rest or during gentle mixing and/or handling on the one hand, and the likely shear-induced breakdown of this structure at 25 or 35 degrees Celsius on the other. The data obtained clearly show the influence of temperature on the development of a cement microstructure during setting, in all cases leading to a microporous cement made of an entangled network of aragonite-CaCO(3) needle-like crystals. Linear viscoelastic measurements arriving from an oscillatory shear at low deformation showed a progressive increase in the viscous modulus (G'') during paste setting, which is enhanced by an increase in temperature. In addition, steady shear measurements revealed the shear-thinning behaviour of this self-setting paste over an extended period after paste preparation and its ability to re-build through progressive paste setting at rest. The shear-thinning behaviour of this self-setting system was confirmed using the injectability system and a procedure we designed. The force needed to extrude a homogeneous and continuous column of paste decreases strongly upon injection and reaches a weight level to apply on the syringe piston around 2.5 kg, revealing the ease of injection of this CaCO(3) self-setting paste.

Aging and yielding in a sheared AOT/iso-octane/water lyotropic lamellar phase.

We define a creep-flow-based measurement procedure to allow reliable and reproducible results on aging and yielding materials to be obtained. Investigation of the effects of different parameter such as the pre-shear time, the recovery time and the applied stress magnitude on the viscoelastic properties of a lyotropic liquid crystal phase is reported. Cryo-TEM observations indicate the formation of multiconnected bilayers at rest. Shearing the investigated material shows a propensity to acquire all the macroscopic properties of "soft jammed systems". These properties are then interpreted in terms of shear-induced structural rearrangement on the basis of cryofracture observation obtained at different times after the preshear imposed.