Synthesis, biological evaluation, and computational studies of N-benzyl pyridinium-curcumin derivatives as potent AChE inhibitors with antioxidant activity.

A library of N-benzylpyridinium-based compounds, 7a-j and 8a-j, was designed and synthesised as potential acetylcholinesterase) AChE (inhibitors. An in vitro assay for the synthesised compounds showed that most compounds had significant AChE inhibitory activities at the nanomolar and submicromolar levels. The benzyl (8a) and fluoro (8b) derivatives were the most active, with IC50 values ≤56 nM. Compound 7f, which had a benzyl moiety, showed the highest potency among all the target compounds, with an IC50 value of 7.5 ± 0.19 nM against AChE, which was higher than that of the activities of tacrine (IC50 = 30 ± 0.2 nM) and donepezil (IC50 = 14 ± 0.12 nM). Compounds with vanillin moieties exhibited antioxidant activity. Among the tested compounds, four derivatives (7f, 7 g, 8f, and 8 g) exhibited superior AChE inhibitory activity, with Ki values of 6-16 nM, which were potent in the same range as the approved drug, donepezil. These compounds showed moderate antioxidant activities, as indicated by the results of the ABTS assay.

Binary and Ternary Complexes of Cucurbit[8]uril with Tryptophan, Phenylalanine, and Tyrosine: A Computational Study.

Selective binding of amino acids, peptides, and proteins by synthetic molecules and elucidation of the geometry and dynamics of the resulting complexes and their strengths are active areas of contemporary research. In recent work, we analyzed via molecular dynamics (MD) simulations the complexes formed between cucurbit[7]uril (CB7) and three aromatic amino acids: tryptophan (W), phenylalanine (F), and tyrosine (Y). Herein, we continue this line of research by performing MD simulations lasting 100 ns to investigate the formation, stabilities, binding modes, dynamics, and specific host-guest noncovalent interactions contributing to the formation of the binary (1:1) and ternary (2:1) complexes in aqueous solution between W, F, and Y amino acids and cucurbit[8]uril (CB8). All complexes were found to be stable, with the binding in each complex dominated by one mode (except for the F-CB8 complex, which had two) characterized by encapsulation of the aromatic side chains of the amino acids within the cavity of CB8 and the exclusion of their ammonium and carboxylate groups. Using the molecular mechanics/Poisson-Boltzmann surface area method to estimate the individual contributions to the overall free energies of binding, results revealed that the key role is played by the amino acid side chains in stabilizing the complexes through their favorable van der Waals interactions with the CB8 cavity and the importance of favorable electrostatic interactions between the carbonyl portal of CB8 and the ammonium group of the amino acid. Visual analysis of structures of the ternary complexes indicated the presence of π-π stacking between the aromatic side chains of the included amino acids. The insights provided by this work may be of value for further efforts aiming to employ the recognition properties of CB8 toward amino acids in applications requiring more elaborate recognition of short peptides and proteins.

Encapsulation of ionic liquids inside cucurbiturils.

Cucurbit[n]urils (CBn, n = 6-8) serve as molecular receptors for imidazolium-based ionic liquids (ILs) in aqueous solution. The amphiphilic nature of 1-alkyl-3-methylimidazolium guests (Cnmim), with a cationic imidazolium residue and a hydrophobic alkyl chain, enabled their complexation with CBn through a combination of the hydrophobic effect and ion-dipole interactions. 1H NMR experiments revealed that the cavity of CBn can host the hydrophobic chain of the ILs, while one of the carbonyl rims served as a docking site for the imidazolium ring. The structure of the complexes was further analyzed by molecular dynamics (MD) simulations, which indicated that the cavity of CB6 can accommodate up to 5 carbon atoms, while the larger cavity of CB7 and CB8 can encapsulate longer alkyl chains in folded conformations. Isothermal titration calorimetry (ITC) experiments provided up to micromolar affinity of ILs to CBn in aqueous solution, which was independently quantified by indicator displacement titrations.

Elucidation of the Controlled-Release Behavior of Metoprolol Succinate from Directly Compressed Xanthan Gum/Chitosan Polymers: Computational and Experimental Studies.

The development and evaluation of a controlled-release (CR) pharmaceutical solid dosage form comprising xanthan gum (XG), low molecular weight chitosan (LCS), and metoprolol succinate (MS) are reported. The research is, partly, based upon the utilization of computational tools: in this case, molecular dynamics simulations (MDs) and the response surface method (RSM) in order to underpin the design/prediction and to minimize the experimental work required to achieve the desired pharmaceutical outcomes. The capability of the system to control the release of MS was studied as a function of LCS (% w/w) and total polymer (LCS and xanthan gum (XG)) to drug ratio (P/D) at different tablet tensile strengths. MDs trajectories, obtained by using different ratios of XG/LCS as well as XG and high molecular weight chitosan (HCS), showed that the driving force for the interaction between XG and LCS is electrostatic in nature, the most favorable complex is formed when LCS is used at 15% (w/w) and, importantly, the interaction between XG and LCS is more favorable than that between XG and HCS. RSM outputs revealed that the release of the drug from the LCS/XG matrix is highly dependent on both the % LCS and the P/D ratio and that the required CR effect can be achieved when using weight fractions of LCS ≤ 20% and P/D ratios ≥2.6:1. Results obtained from in vitro drug release and swelling studies on the prepared tablets showed that using LCS at the weight fractions suggested by MDs and RSM data plays a major role in overcoming the high sensitivity of the controlled drug release effect of XG on ionic strength and pH changes of the dissolution media. In addition, it was found that polymer relaxation is the major contributor to the release of MS from LCS/XG tablets. Using Raman spectroscopy, MS was shown to be localized more in the core of the tablets at the initial stages of dissolution due to film formation between LCS and XG on the tablet surface, which prevents excess water penetration into the matrix. In the later stages of the dissolution process, the film starts to dissolve/erode, allowing full tablet hydration and a uniform drug distribution in the swollen tablet.

Effect of Protonation State and N-Acetylation of Chitosan on Its Interaction with Xanthan Gum: A Molecular Dynamics Simulation Study.

Hydrophilic matrices composed of chitosan (CS) and xanthan gum (XG) complexes are of pharmaceutical interest in relation to drug delivery due to their ability to control the release of active ingredients. Molecular dynamics simulations (MDs) have been performed in order to obtain information pertaining to the effect of the state of protonation and degree of N-acetylation (DA) on the molecular conformation of chitosan and its ability to interact with xanthan gum in aqueous solutions. The conformational flexibility of CS was found to be highly dependent on its state of protonation. Upon complexation with XG, a substantial restriction in free rotation around the glycosidic bond was noticed in protonated CS dimers regardless of their DA, whereas deprotonated molecules preserved their free mobility. Calculated values for the free energy of binding between CS and XG revealed the dominant contribution of electrostatic forces on the formation of complexes and that the most stable complexes were formed when CS was at least half-protonated and the DA was ≤50%. The results obtained provide an insight into the main factors governing the interaction between CS and XG, such that they can be manipulated accordingly to produce complexes with the desired controlled-release effect.

Structure-activity relationship of novel series of 1,5-disubstituted tetrazoles as cyclooxygenase-2 inhibitors: Design, synthesis, bioassay screening and molecular docking studies.

A novel class of modified 1,5-disubstituted tetrazoles was designed and synthesized, their biological activity as cyclooxygenases inhibitors was screened, and their molecular docking studies were performed. The structural modifications of the first category included the 4-methylsulfonyl phenyl at C-1 of the central moiety and the linkers (-OH, -CH2OH, -CH2CH2OH) with different lengths at the para position of the N-1 phenyl group. For the second category, the 4-methylsulfonyl phenyl group at C-1 was replaced with 4-aminosulfonyl phenyl. While for the third category, a methylene unit was inserted between the C-1 of the tetrazole central ring and the 4-(methylsulfonyl)phenyl group, keeping the same linkers of various extensions at the para position of the N-1 phenyl group. Among the screened compounds, tetrazole 4i showed the best inhibition potency and selectivity values for both COX-2 enzyme (IC50=3µM, SI>67) and COX-1 isoenzyme (IC50>200µM). Compounds 4e, 4h, and 4i, which have the highest inhibition potency toward COX-2 were selected for the molecular docking studies to verify their inhibition and selectivity for COX-2 over COX-1 with their modified structure. The obtained theoretical studies are in agreement with the in vitro bioassay screening results, which supports the importance of the structural modifications for our studied compounds.

Water dynamics in water/DMSO binary mixtures.

The dynamics of dimethyl sulfoxide (DMSO)/water solutions with a wide range of water concentrations are studied using polarization selective infrared pump-probe experiments, two-dimensional infrared (2D IR) vibrational echo spectroscopy, optical heterodyne detected optical Kerr effect (OHD-OKE) experiments, and IR absorption spectroscopy. Vibrational population relaxation of the OD stretch of dilute HOD in H(2)O displays two vibrational lifetimes even at very low water concentrations that are associated with water-water and water-DMSO hydrogen bonds. The IR absorption spectra also show characteristics of both water-DMSO and water-water hydrogen bonding. Although two populations are observed, water anisotropy decays (orientational relaxation) exhibit single ensemble behavior, indicative of concerted reorientation involving water and DMSO molecules. OHD-OKE experiments, which measure the orientational relaxation of DMSO, reveal that the DMSO orientational relaxation times are the same as orientational relaxation times found for water over a wide range of water concentrations within experimental error. The fact that the reorientation times of water and DMSO are basically the same shows that the reorientation of water is coupled to the reorientation of DMSO itself. These observations are discussed in terms of a jump reorientation model. Frequency-frequency correlation functions determined from the 2D IR experiments on the OD stretch show both fast and slow spectral diffusion. In analogy to bulk water, the fast component is assigned to very local hydrogen bond fluctuations. The slow component, which is similar to the slow water reorientation time at each water concentration, is associated with global hydrogen bond structural randomization.

Derivatization of 2-chlorophenol with 4-amino-anti-pyrine: a novel method for improving the selectivity of molecularly imprinted solid phase extraction of 2-chlorophenol from water.

Molecularly imprinted polymer (MIP) may not selectively recognize small template of limited number of functional groups, such as 2-chlorophenol (2-CP). In this work, a novel method was proposed to improve the recognition ability of the molecularly imprinted solid phase extraction (MISPE) of 2-CP from environmental waters. This was achieved by derivatization of 2-CP with 4-amino-anti-pyrine (4-AAP) to enlarge its molecular size and add more binding sites. For that purpose, two MISPE methods of 2-CP were developed. In method 1, a polymer imprinted with 2-CP was used as the extracting sorbent but it suffered from low selectivity and high detection limit of 2-CP (7.10 ng L(-1)). In method 2, a polymer imprinted with 4-AAP derivatized 2-CP (2-CP-4-AAP) was used as the extracting sorbent. Prior to loading the water sample it was subjected to a simple derivatization procedure with 4-AAP. Method 2 showed high recognition ability/selectivity towards 2-CP-4-AAP with lower detection limit of 0.05 ng L(-1) for 2-CP-4-AAP. Method 2 was able to detect the presence of 2-CP-4-AAP in unspiked real water samples and almost full spike recovery was achieved.

Novel inclusion complex of ibuprofen tromethamine with cyclodextrins: physico-chemical characterization.

Guest-host interactions of ibuprofen tromethamine salt (Ibu.T) with native and modified cyclodextrins (CyDs) have been investigated using several techniques, namely phase solubility diagrams (PSDs), proton nuclear magnetic resonance ((1)H NMR), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffractometry (XRPD), scanning-electron microscopy (SEM) and molecular mechanics (MM). From the analysis of PSD data (A(L)-type) it is concluded that the anionic tromethamine salt of ibuprofen (pK(a)=4.55) forms 1:1 soluble complexes with all CyDs investigated in buffered water at pH 7.0, while the neutral form of Ibu forms an insoluble complex with beta-CyD (B(S)-type) in buffered water at pH 2.0. Ibu.T has a lower tendency to complex with beta-CyD (K(11)=58 M(-1) at pH 7.0) compared with the neutral Ibu (K(11)=4200 M(-1)) in water. Complex formation of Ibu.T with beta-CyD (DeltaG(o)=-20.4 kJ/mol) is enthalpy driven (DeltaH(o)=-22.9 kJ/mol) and is accompanied by a small unfavorable entropy (DeltaS(o)=-8.4 J/mol K) change. (1)H NMR studies and MM computations revealed that, on complexation, the hydrophobic central benzene ring of Ibu.T and part of the isobutyl group reside within the beta-CyD cavity leaving the peripheral groups (carboxylate, tromethamine and methyl groups) located near the hydroxyl group networks at either rim of beta-CyD. PSD, (1)H NMR, DSC, FT-IR, XRPD, SEM and MM studies confirmed the formation of Ibu.T/beta-CyD inclusion complex in solution and the solid state.

Sorption of Zn(II), Pb(II), and Co(II) using natural sorbents: equilibrium and kinetic studies.

Natural Jordanian sorbent (consisting of primary minerals, i.e., quartz and aluminosilicates and secondary minerals, i.e., calcite and dolomite) was shown to be effective for removing Zn(II), Pb(II) and Co(II) from aqueous solution. The major mineral constitutions of the sorbent are calcite and quartz. Dolomite was present as minor mineral and palygorskite was present as trace mineral. The sorbent has microporous structure with a modest surface area of 14.4 m(2)g(-1). pH(zpc) (pH of zero point charge) of the sorbent was estimated by alkaline-titration methods and a value of 9.5 was obtained. The sorption capacities of the metals were: 2.860, 0.320, 0.076 mmol cation g(-1) for Zn(II), Pb(II) and Co(II) at pH 6.5, 4.5 and 7.0, respectively. The shape of the experimental isotherm of Zn(II) was of a "L2" type, while that of Pb(II) and Co(II) was of a "L1" type according to Giles classification for isotherms. Sorption data of metals were described by Langmuir and Freundlich models over the entire concentration range. It was found that the mechanism of metal sorption was mainly due to precipitation of metal carbonate complexes. The overall sorption capacity decreased after acid treatment, as this decreased the extent of precipitation on calcite and dolomite. The effect of Zn(II) ions concentration on sorption kinetics was investigated. Kinetic data were accurately fitted to pseudo-first order and external diffusion models which indicated that sorption of Zn(II) occurred on the exterior surface of the sorbent and the contribution of internal diffusion mechanism was insignificant. Furthermore, the sorption rate of Zn(II) was found to be slow, where only 10-20% of the maximum capacity was utilized in the first 30 min of interaction.