Synthesis of Trimetallic Nanoparticle (NiCoPd)-Supported Carbon Nanofibers as a Catalyst for NaBH4 Hydrolysis.

The generation of H2 via the catalytic hydrolysis of sodium borohydride (SBH) has promise as a practical and secure approach to produce H2, a secure and environmentally friendly energy source for the foreseeable future. In this study, distinctive trimetallic NiCoPd nanoparticle-supported carbon nanofibers (NiCoPd tri-NPs@CNFs) is synthesized via sol-gel and electrospinning approaches. The fabricated trimetallic catalysts show an excellent catalytic performance for the generation of H2 from the hydrolysis of SBH. Standard physicochemical techniques were used to characterize the as-prepared NiCoPd tri-NPs@CNFs. The results show that NiCoPd tri-NPs@CNFs is formed, with an average particle size of about 21 nm. When compared to NiCo bimetallic NP @CNFS, all NiCoPd tri-NPs@CNFs formulations demonstrated greater catalytic activates for the hydrolysis of SBH. The improved catalytic activity may be due in the majority to the synergistic interaction between the three metals in the trimetallic architecture. Furthermore, the activation energy for the catalytic hydrolysis of SBH by the NiCoPd tri-NPs@CNFs was determined to be 16.30 kJ mol-1. The kinetics studies show that the reaction is of a first order with respect to the catalyst loading amount and a half order with respect to the SBH concentration [SBH].

Synthesis of Ilmenite Nickel Titanite-Supported Carbon Nanofibers Derived from Polyvinylpyrrolidone as Photocatalyst for H2 Production from Ammonia Borane Photohydrolysis.

The present study involves the synthesis of photocatalytic composite nanofibers (NFs) comprising ilmenite nickel titanite-supported carbon nanofibers (NiTiO3/TiO2@CNFs) using an electrospinning process. The photocatalytic composite NFs obtained were utilized in hydrogen (H2) production from the photohydrolysis of ammonia borane (AB). The experimental findings show that the photocatalytic composite NFs with a loading of 25 mg had a good catalytic performance for H2 generation, producing the stoichiometric H2 in 11 min using 1 mmol AB under visible light at 25 °C and 1000 rpm. The increase in catalyst load to 50, 75, and 100 mg leads to a corresponding reduction in the reaction time to 7, 5, and 4 min. The findings from the kinetics investigations suggest that the rate of the photohydrolysis reaction is directly proportional to the amount of catalyst in the reaction system, adhering to a first-order reaction rate. Furthermore, it was observed that the reaction rate remains unaffected by the concentration of AB, thereby suggesting a reaction of zero order. Increasing the reaction temperature results in a decrease in the duration of the photohydrolysis reaction. Furthermore, an estimated activation energy value of 35.19 kJ mol-1 was obtained. The composite nanofibers demonstrated remarkable and consistent effectiveness throughout five consecutive cycles. The results suggest that composite NFs possess the capacity to function as a feasible substitute for costly catalysts in the process of H2 generation from AB.

Electrospun NiPd Nanoparticles Supported on Polymer Membrane Nanofibers as an Efficient Catalyst for NaBH4 Dehydrogenation.

Sodium borohydride (SBH) hydrolysis in the presence of cheap and efficient catalysts has been proposed as a safe and efficient method for generating clean hydrogen energy for use in portable applications. In this work, we synthesized bimetallic NiPd nanoparticles (NPs) supported on poly(vinylidene fluoride-co-hexafluoropropylene) nanofibers (PVDF-HFP NFs) via the electrospinning approach and reported an in-situ reduction procedure of the NPs being prepared by alloying Ni and Pd with varying Pd percentages. The physicochemical characterization provided evidence for the development of a NiPd@PVDF-HFP NFs membrane. The bimetallic hybrid NF membranes exhibited higher H2 production as compared to Ni@PVDF-HFP and Pd@PVDF-HFP counterparts. This may be due to the synergistic effect of binary components. The bimetallic Ni1-xPdx(x = 0, 0.05, 0.1, 0.15, 0.2, 0.25, 0.3)@PVDF-HFP nanofiber membranes exhibit composition-dependent catalysis, in which Ni75Pd25@PVDF-HFP NF membranes demonstrate the best catalytic activity. The full H2 generation volumes (118 mL) were obtained at a temperature of 298 K and times 16, 22, 34 and 42 min for 250, 200, 150, and 100 mg dosages of Ni75Pd25@PVDF-HFP, respectively, in the presence of 1 mmol SBH. Hydrolysis utilizing Ni75Pd25@PVDF-HFP was shown to be first order with respect to Ni75Pd25@PVDF-HFP amount and zero order with respect to the [NaBH4] in a kinetics study. The reaction time of H2 production was reduced as the reaction temperature increased, with 118 mL of H2 being produced in 14, 20, 32 and 42 min at 328, 318, 308 and 298 K, respectively. The values of the three thermodynamic parameters, activation energy, enthalpy, and entropy, were determined toward being 31.43 kJ mol-1, 28.82 kJ mol-1, and 0.057 kJ mol-1 K-1, respectively. It is simple to separate and reuse the synthesized membrane, which facilitates their implementation in H2 energy systems.

Membrane Nanofiber-Supported Cobalt-Nickel Nanoparticles as an Effective and Durable Catalyst for H2 Evolution via Sodium Borohydride Hydrolysis.

The successful support of bimetallic NiCo alloy nanoparticles (NPs) on poly(vinylidene fluoride-co-hexafluoropropylene) nanofibers (PVDF-HFP NFs) was achieved through electrospinning (ES) and in situ reduction. The synthesis and physicochemical characterization of Ni-Co@PVDF-HFP NFs with a range of bimetallic compositions (Ni1-xCox, x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, and 1) supported on PVDF-HFP NFs was undertaken. In comparison to their counterparts (Ni-PVDF-HFB and Co-PVDF-HFB), the bimetallic hybrid NF membranes demonstrated a significantly increased volume of H2 generation from sodium borohydride (SBH). The high performance of bimetallic catalysts can be attributed mostly to the synergistic impact of Ni and Co. Among all fabricated catalysts, Ni0.3Co0.7@PVDF-HFP produced the highest H2 production in a short time. The maximum generated H2volume was 118 mL in 11.5, 9, 6, and 4.5 min at 298, 308, 318, and 328 K, respectively. Kinetic analyses showed that the hydrolysis process proceeded as a quasi-first-order reaction with respect to the amount of catalyst and as a zero-order reaction with respect to the concentration of SBH. Thermodynamics studies were also undertaken and the parameters were calculated as Ea, ΔS, and ΔH = 30.17 kJ/mol, 0.065 kJ/mol, and 27.57 kJ/mol K, respectively. The introduced NFs can be easily separated and reused, which facilitates their industrialization and commercialization applications in hydrogen storage systems.

Electrospun Co Nanoparticles@PVDF-HFP Nanofibers as Efficient Catalyst for Dehydrogenation of Sodium Borohydride.

Metallic Co NPs@poly(vinylidene fluoride-co- hexafluoropropylene) nanofibers (PVFH NFs) were successfully synthesized with the help of electrospinning and in situ reduction of Co2+ ions onto the surface of PVFH membrane. Synthesis of PVFH NFs containing 10, 20, 30, and 40 wt% of cobalt acetate tetrahydrate was achieved. Physiochemical techniques were used to confirm the formation of metallic Co@PVFH NFs. High catalytic activity of Co@PVFH NFs in the dehydrogenation sodium borohydride (SBH) was demonstrated. The formulation with 40 wt% Co proved to have the greatest performance in comparison to the others. Using 1 mmol of SBH and 100 mg of Co@PVFH NFs, 110 mL of H2 was produced in 19 min at a temperature of 25 °C, but only 56, 73, and 89 mL were produced using 10, 20, and 30 wt% Co, respectively. With the rise of catalyst concentration and reaction temperature, the amount of hydrogen generated increased. By raising the temperature from 25 to 55 °C, the activation energy was lowered to be 35.21 kJ mol-1 and the yield of H2 generation was raised to 100% in only 6 min. The kinetic study demonstrated that the reaction was pseudo-first order in terms of the amount of catalyst utilized and pseudo-zero order in terms of the SBH concentration. In addition, after six cycles of hydrolysis, the catalyst showed outstanding stability. The suggested catalyst has potential applications in H2 generation through hydrolysis of sodium borohydride due to its high catalytic activity and flexibility of recycling.

Tungsten carbide@graphene nanoflakes: Preparation, characterization and electrochemical activity for capacitive deionization technology.

In this present work, tungsten carbide (WC) nanoparticles were intercalated between graphene nanoflakes (GNFs) using sonication followed by hydrothermal treatment. Pristine WC, GNFs and a series of WC@GNFs nanomaterials were physically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) and water contact angle measurements. Cyclic voltammetry and electrochemical impedance studies were operated to investigate the electrochemical performance of these nanocomposites as efficient capacitive deionization (CDI) electrodes with improved electrochemical characteristics and specific capacitances in NaCl solution. Among the synthesized nanomaterials, WC@GNFs containing 10% WC displayed appreciable specific capacitance [580.00 F g-1], salt removal efficiency [95.50%], electrosorptive capacity [22.155 mg g-1] and charge efficiency [0.356] values. Accordingly, the measured results in this study indicate that WC@GNFs nanomaterials are suitable electrodes with an easy preparation route for efficient CDI technology.

In-Situ Synthesis of Amorphous Co Nanoparticles Supported onto TiO2 Nanofibers as a Catalyst for Hydrogen Generation from the Hydrolysis of Ammonia Borane.

Co0 nanoparticles supported on TiO2 nanofibers (nanocomposite) were prepared using a simple electrospinning technique and In-Situ chemical reduction. The synthesized nanocomposite was used to generate hydrogen from ammonia borane (AB). Standard characterization techniques revealed dense distribution of Co0 nanoparticles (Co NPs) onto the TiO2 nanofibers (TiO2 NFs) in the prepared nanocomposite. The introduced nanocomposite has been showed a good catalytic activity as compared to those unsupported Co NPs. As, the hydrogen evolutions for the nanocomposite and Co NPs were 3 mol in 23 min and 47 min, respectively. Furthermore, both the nanocomposite concentration and the temperature have a significant catalytic activity in the AB dehydrogenation. The nanocomposite also showed low effective activation energy of ~26.03 KJ · mol-1.