Simultaneous Determination of Montelukast Sodium and Loratadine by Eco-Friendly Densitometry and Spectrophotometric Methods.

Recently, the aim of analytical community is to reduce the usage of hazardous chemicals; so eco-friendly, rapid, selective and cost-effective methods were developed for simultaneous determination of montelukast sodium (MKT) and loratadine (LRT). The first method was based on chromatographic separation performed on precoated silica gel 60 GF254 plates with ethyl acetate-ethanol 9: 1 (v/v) as the mobile phase. The developed plates were scanned and quantified at 260 nm. The method gives linear correlation over concentration ranges of 0.3-3.6 µg/spot and 0.2-4.0 µg/spot for MKT and LRT, respectively. It was also successfully applied to analysis of both drugs in their pharmaceutical preparation and human plasma. The other methods are UV-spectrophotometric methods based on smart spectra manipulating to zero order spectrum of each drug. These methods are named response correlation (RC), a-centering and ratio derivative methods. RC and a-centering methods were dependent on the presence of an isosbestic point between the overlapped spectra of both drugs. While ratio derivative method based on manipulation of the ratio spectra of both drugs. The two drugs obey Beer-Lambert law over the concentration ranges of 3.0-30.0 µg/mL in the three spectrophotometric methods. Moreover, the greenness of the developed methods is assessed using suitable analytical Eco-Scale and Green Analytical Procedure Index.

Dietary supplement mislabelling: case study on selected slimming products by developing a green isocratic HPLC method for their quality control.

Nowadays, a huge population consumes Dietary supplements for losing weight. Products are often claimed as botanical blends, yet they aren't necessarily safe. Misleading labels are also very common. Thus, validated analytical methods for a wide range of slimming compounds are highly needed. Herein, we present a simple HPLC/PDA method for the quantitation of seven popular slimming ingredients. Studied compounds were Caffeine, Raspberry Ketone, trans-Resveratrol, p-Synephrine, p-Octopamine, p-Hordenine and 2-phenethylamine. After optimization, separation was carried out on a C18 column and mobile phase was a mixture of Acetonitrile:Water containing 0.1% phosphoric acid (50:50, %v/v). The last compound was eluted at 9.76 min. Separation was efficient showing baseline- separated symmetric peaks, without using any gradient programs, organic mobile phase modifiers or modified stationary phases. Method validation was done following ICH guidelines. Calibration curves were linear over wide concentration ranges and calculated LOD values were in the range 0.02-0.09 µg/mL. Method greenness was assessed using Analytical Eco-scale, GAPI and AGREE metric tools. Further, four random sample products purchased from online supplement stores were assayed. Results proved some mislabeling actions. To support our findings, standard addition was carried out and average % recoveries were 96.67 - 101.44% with standard deviation ≤ 2.83 between measurements.

Simultaneous quantitative determination of insulin aspart and insulin degludec in human plasma using simple shoot LC method.

Combining short-acting and long-acting insulin analogs was a real challenge that was overcome by NovoNordisk through the co-formulation of insulin aspart and insulin degludec in single-dosage form. The proposed study provides a simple, short, and reliable HPLC method with diode array detection that is developed and validated for the simultaneous determination of insulin aspart and insulin degludec in human plasma. The proposed method achieved good separation between the two analytes utilizing a C8 column at 35°C in a very short run time (6 min), with a simple, low-cost, and reliable extraction method through precipitation of plasma protein. Gradient elution was applied using a mobile phase consisting of 0.1 M sodium sulfate (pH 3.4) and acetonitrile. The method was validated according to EMA Guideline on Bioanalytical Validation. The proposed method had a linear range from 3.0 to 300 µg/mL for insulin aspart and from 3.5 to 300 µg/mL for insulin degludec. The intra- and inter-day precision of insulin aspart were 0.36-3.33% and 1.59-8.84%, respectively, and accuracy was between 10.06 and 3.09% The intra- and inter-day precision of insulin degludec were 0.29-1.93% and 0.89-5.14%, respectively, and accuracy was between -5.29 and 3.91%.

Quality control of dietary supplements: An economic green spectrofluorimetric assay of Raspberry ketone and its application to weight variation testing.

Although Dietary supplements are readily accessible and extensively used worldwide, they are inadequately regulated and consumers are victims of manufacturers' fraud. Thus, quality regulations are required to ensure safety of products available to the public. We propose the first native spectrofluorimetric quality control assay of raspberry ketone, a popular dietary supplement ingredient for weight loss. This work relies on the constant wavelength synchronous scan of the Raspberry Ketone native fluorescence, overcoming the demerits of conventional excitation/ emission spectra. For the best measurement conditions, several parameters were optimized including Δλ value, diluting solvent, medium pH and the effect of surfactants/ macromolecules. In aqueous medium (Δλ = 110 nm), a linear relationship exists between synchronous fluorescence intensity at peak maximum 405.6 nm and solution concentration in the range 300-1500 ng/mL. Method sensitivity was recorded with LOD and LOQ values 60.63 and 183.72 ng/mL; respectively. Validation was done in accordance to International Conference on Harmonization (ICH) guidelines. This simple procedure was successfully applied to the analysis of Raspberry Ketone in commercially available dietary supplement capsules with average recovery 98.67% ± 1.74 and further extended to weight variation testing following the official United States Pharmacopeial (USP) guidelines. Finally, green assessment was done using the ''Analytical Eco-scale'' tool. The total score was 89/100 points revealing excellent greenness of our proposal. Our proposal is simple, eco-friendly and cheap. It can be conveniently adopted for routine quality control practices especially in developing countries.

A comprehensive stability assessment of insulin degludec using New customized validated RP-HPLC and SEC-HPLC methods in an orthogonal testing protocol.

Stress testing of biopharmaceuticals plays an important role in preparation of their stability profiles through investigation of possible degradation pathways and identification of degradation products, so in this study Insulin Degludec which is a new generation ultra-long-acting basal insulin is subjected to stress conditions as different temperatures, different pH, oxidation, mechanical agitation, and repeated freeze and thaw cycles to generate possible degradation products and aggregation that are investigated by two new validated RP-HPLC and SEC-HPLC methods in addition to dynamic light scattering (DLS) and native polyacrylamide gel electrophoresis (Nu-PAGE). SEC-HPLC was used to investigate formation of aggregates whose results were correlated with those obtained from DLS and Nu-PAGE, while RP-HPLC was used to investigate any possible chemical modifications. The Proposed RP-method had limit of detection (LOD) and limit of quantitation (LOQ) of 0.012 mg/mL and 0.045 mg/mL respectively and accuracy of 99.22 ± 1.07 %, while the SEC methods had limit of detection (LOD) and limit of quantitation (LOQ) of 0.012 mg/mL and 0.031 mg/mL, respectively. The degradation pattern due to high temperature effect and oxidation is investigated by LC- tandem mass spectrometry. Results showed that Insulin degludec is highly stable under low temperature, mechanical agitation and repeated freeze and thaw stress conditions but elevated temperature and high acidic condition lead to formation of aggregates and also chemical modifications including deamidation, isomerization and oxidation. Such different chemical degradation pathways are due to presence of variable reactive moieties in Insulin degludec structure. Insulin degludec is highly vulnerable to oxidation at the sulfur containing cysteine residue in B chain in position B7 forming trioxidation derivative when exposed to hydrogen peroxide. Formation of A21-Asp and A18-Asp deamidated variants as well as B3-Asp and B3-isoAsp deamidated variants are prominent degradation pathways at neutral pH but at elevated temperature.

Spectrophotometric Determination of Polyvinyl Pyrrolidone in Pure and Pharmaceutical Dosage Form.

BACKGROUND: Recently, functional polymers have attracted significant attention in the areas of pharmaceuticals and biomedical applications, so it is important to develop simple techniques to analyze functional polymers in their pharmaceutical dosage forms. OBJECTIVE: Three simple, accurate, and sensitive UV spectrophotometric methods have been developed and validated for determination of polyvinyl pyrrolidone (PVP) in the presence of benzalkonium chloride (BZ) and sodium lactate in ternary mixtures. METHOD: Method A is a derivative ratio spectra zero-crossing (DRSZ) method which measures PVP peak amplitude at 303.1 nm. Method B is a double divisor ratio derivative (DDRD), used for determination of both PVP and BZ in the presence of sodium lactate at 272.6 and 271.5 nm, respectively. Method C is a double divisor ratio derivative-ratio difference spectrophotometric method (DDRD-RDSM), a new and hybrid method of double divisor and ratio difference that hasn't been applied before. It measures peak amplitude difference of the ratio spectra at ΔP278 - 252.4 and ΔP260.9 - 213 for PVP and BZ, respectively. RESULTS: Linear ranges for PVP (5.00-35.00, 10.00-40.00, and 10.00-40.00 µg/mL) was obtained by using DRSZ, DDRD, and DDRD-RDSM, respectively. While the linear range for BZ (5.00-60 µg/mL) was obtained by using both DDRD and DDRD-RDSM. CONCLUSIONS: All results were statistically compared with reported methods. No significant differences were observed. The developed methods were applied to the analysis of the investigated drugs in pure and pharmaceutical dosage forms. HIGHLIGHTS: The proposed methods are of great value, improving the efficiency of routine analysis of PVP and BZ in their pharmaceutical dosage forms.

New and validated RP-HPLC Method for Quantification of Safinamide Mesylate in Presence of Its Basic Degradate, Levodopa and Ondansetron: Application to Human Plasma.

A simple, precise, rapid and accurate reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated for analysis of safinamide mesylate (SAF) in presence of its basic degradate, and co-administered drugs levodopa and ondansetron. The mobile phase consisted of acetonitrile and 20 mM potassium dihyrogen orthophosphate buffer having pH = 5 (40: 60 v/v). Quantification was achieved with ultraviolet detector at 226 nm. The linear range was 0.5-10 µg/mL with mean recovery ± SD of 99.72 ± 1.59. The peak purity of SAF in pharmaceutical preparation spiked with its degradate and co-administered drugs revealed symmetry factor (999.8) within the calculated threshold (>998.1). The suggested method was validated in compliance with the International Conference on Harmonization (ICH) guidelines and statistically compared with the manufacturer HPLC method with no significant difference in terms of accuracy and precision. The assay method was successfully used to estimate SAF in tablets with good percentage recoveries. The high sensitivity (lower than Cmax of the drug 0.65 µg/mL) of the proposed HPLC method enabled the determination of SAF in presence of its basic degradate and co-administered drug, ondansetron in human plasma with acceptable accuracy. The suggested HPLC method could be used in Quality Control (QC) lab for analysis of the studied drug in pharmaceutical preparation.

Ecofriendly Long Life Nanocomposite Sensors for Determination of Carbachol in Presence of Choline: Application in Ophthalmic Solutions and Biological Fluids.

Several emerging nano scale forms of carbon are showing great promise in electrochemical sensing such as graphene and multi-walled carbon nanotubes (MWCNTs). Herein we present an ecofriendly method to fabricate long life and sensitive ion selective sensors based on graphene and MWCNTs nanocomposites with no need for volatile organic solvents. Both sensors were fabricated, for the analysis of carbachol in ophthalmic solutions, plasma and urine where ion- association complex was formed between cationic carbachol and anionic Sodium tetra phenyl borate (NaTBP) in a ratio 1:1. Both sensors were evaluated according to the IUPAC recommendation data, revealing linear response in the concentration range 10-7 M to 10-2 M with near Nernstian slopes 50.80 ± 5 and 58.14 ± 3 mV/decade and correlation coefficients 0.9992 and 0.9998 for graphene and MWCNTs based sensors, respectively. Both sensors were successfully applied as stability indicating method for the analysis of carbachol in presence of its metabolite choline, in ophthalmic preparations, in plasma and urine showing good recovery percentage values. MWCNTs based sensor showed some advantages over graphene sensor regarding lower limit of detection (LOD), longer life time and higher selectivity towards carbachol. Statistical comparison of the proposed sensors with the official method showed no significant difference for accuracy and precision.

Graphene nanoplatelets in potentiometry: A nanocomposite carbon paste and PVC based membrane sensors for analysis of Vilazodone HCl in plasma and milk samples.

Graphene is the ''new star'' material for electrochemical sensing. It has unique mechanical, thermal and electrical properties, in addition to its ultra light weight. In the present work we combine for the first time the special features offered by graphene and the advantages of ion selective potentiometric sensors in a single study. We propose two types of sensors, a graphene based carbon paste and a poly vinyl chloride (PVC) based membrane sensors for the analysis of Vilazodone hydrochloride in bulk, human plasma and formula milk samples. Electro active agent is an ion- association complex based on coupling of Vilazodone cationic cite with anionic cite of Molybdate ion in a ratio 1:1. Both sensors are evaluated according to the IUPAC recommendation data, revealing linear response in the concentration range 10-7 - 10-3 and10-8 - 10-3 M with a Nernestian slope 59.89 and 59.91 mV/decade for PVC membrane and Carbon paste sensors, respectively. Both sensors were successfully applied to the analysis of Vilazodone HCl in human plasma and formula milk samples showing good recovery percentage values. Graphene based carbon paste sensor shows several advantages over conventional PVC membrane sensor regarding lower limit of detection, faster response time, longer life time and higher selectivity towards target ion.

HPLC Method for Simultaneous Determination of Bisphenol-A-Diglycidyl Ether and Some of Its Reaction Products in Canned Foods Using Photodiode Array Detector.

Gradient reversed-phase high-performance liquid chromatography with photodiode array detection was used for separation, detection and quantification of bisphenol-A-diglycidyl ether (BADGE) and some of its reaction products, namely, BADGE·HCl·H2O, BADGE·H2O and BADGE·2HCl in pure form and in canned foods, where canned beans and tuna were used as representatives of aqueous and oil-in-water food matrices, respectively. The proposed method had a linear range of 0.01-0.5 µg g-1 for BADGE·HCl·H2O, BADGE·H2O, BADGE·2HCl and 0.02-0.7 µg g-1 for BADGE in aqueous food matrices. In oil-in-water matrices, the method was proven to be sensitive over a linear range of 0.01-0.5 µg g-1 for BADGE·HCl·H2O, BADGE·H2O and 0.02-0.7 µg g-1 for BADGE·2HCl and BADGE. The limits of detection and quantification ranged from 0.24 to 1.22 ng g-1 and 0.73 to 14.07 ng g-1, respectively. Excellent intraday and interday precision (n = 9) were obtained with RSD% of 0.84-2.19% and 1.88-2.52%, respectively. Accuracy was measured at five concentration levels and the recoveries ranged from 96.31% to 98.76% with an acceptable variation of ±0.9-2.87. Results suggest that the proposed method could be applied for the routine analysis of the studied compounds in their laboratory-prepared mixtures and in various types of canned foods following the limits and regulations of the European Union.

Validated chemometrics-assisted spectrophotometric methods for simultaneous determination of bisphenol-A-diglycidyl ether and some of its reaction products in canned foods in the Egyptian market.

Two multivariate calibration methods, namely principal component regression (PCR) and partial least squares (PLS-2) have been developed, validated and compared for the simultaneous determination of bisphenol-A-diglycidyl ether (BADGE) and some of its reaction products, including BADGE·HCl·H2O, BADGE·H2O and BADGE·2HCl. Chemometrics allowed rapid, accurate and precise simultaneous quantification of the analytes of interest which was not possible by other spectrophotometric methods due to their severe spectral overlap. PCR and PLS-2 techniques successfully quantified BADGE, BADGE·HCl·H2O, BADGE·H2O and BADGE·2HCl in the ranges of 1.4-3.4, 1-5, 1-4.2 and 1-7 µg mL-1, respectively. The constructed models were validated according to the International Conference on Harmonization guidelines and successfully applied for the determination of these compounds in pure form, laboratory prepared mixtures and in various types of canned foods following the limits and regulations of the European Union (EU) where satisfactory recovery results were obtained.

Degradation product characterization of therapeutic oligonucleotides using liquid chromatography mass spectrometry.

Synthetic antisense phosphorothioate oligonucleotides (PS) have undergone rapid development as novel therapeutic agents. The increasing significance of this class of drugs requires significant investment in the development of quality control methods. The determination of the many degradation pathways of such complex molecules presents a significant challenge. However, an understanding of the potential impurities that may arise is necessary to continue to advance these powerful new therapeutics. In this study, four different antisense oligonucleotides representing several generations of oligonucleotide therapeutic agents were evaluated under various stress conditions (pH, thermal, and oxidative stress) using ion-pairing reversed-phase liquid chromatography tandem mass spectrometry (IP-RPLC-MS/MS) to provide in-depth characterization and identification of the degradation products. The oligonucleotide samples were stressed under different pH values at 45 and 90 °C. The main degradation products were observed to be losses of nucleotide moieties from the 3'- and 5'-terminus, depurination, formation of terminal phosphorothioates, and production of ribose, ribophosphorothioates (Rp), and phosphoribophosphorothioates (pRp). Moreover, the effects of different concentrations of hydrogen peroxide were studied resulting in primarily extensive desulfurization and subsequent oxidation of the phosphorothioate linkage to produce the corresponding phosphodiester. The reaction kinetics for the degradation of the oligonucleotides under the different stress conditions were studied and were found to follow pseudo-first-order kinetics. Differences in rates exist even for oligonucleotides of similar length but consisting of different sequences. Graphical abstract Identification of degradation products across several generations of oligonucleotide therapeutics using LC-MS.

Comparative Study of Univariate Spectrophotometry and Multivariate Calibration for the Determination of Levamisole Hydrochloride and Closantel Sodium in a Binary Mixture.

Six simple, accurate, reproducible, and selective derivative spectrophotometric and chemometric methods have been developed and validated for the determination of levamisole HCl (Lev) either alone or in combination with closantel sodium (Clo) in the pharmaceutical dosage form. Lev was determined by first-derivative, first-derivative ratio, and mean-centering methods by measuring the peak amplitude at 220.8, 243.8, and 210.4 nm, respectively. The methods were linear over the concentration range 2.0-10.0 µg/mL Lev. The methods exhibited a high accuracy, with recovery data within ±1.9% and RSD <1.3% (n = 9) for the determination of Lev in the presence of Clo. Fortunately, Lev showed no significant UV absorbance at 370.6 nm, which allowed the determination of Clo over the concentration range 16.0-80.0 µg/mL using zero-order spectra, with a high precision (RSD <1.5%, n = 9). Furthermore, principal component regression and partial least-squares with optimized parameters were used for the determination of Lev in the presence of Clo. The recovery was within ±1%, with RSD <1.0% (n = 9) and root mean square error of prediction ≤1.0. The proposed methods were validated according to the International Conference on Harmonization guidelines. The proposed methods were used in the determination of Lev and Clo in a binary mixture and a pharmaceutical formulation, with high accuracy and precision.

Micelle enhanced and native spectrofluorimetric methods for determination of sertindole using sodium dodecyl sulfate as sensitizing agent.

Two stability indicating spectrofluorimetric methods were developed and validated for the determination of sertindole (SER) in the presence of its acid and oxidative degradates at λ(ex) 257 nm and λ(em) 335 nm. Method A was based on measuring the native fluorescence of SER using isopropanol as solvent. Method B was based on the enhancement of native fluorescence of SER quenched in aqueous media by using micellar microenvironment created by sodium dodecyl sulfate (SDS) anionic micelles using Britton Robinson Buffer (BRB) pH3.29 as solvent. Different factors affecting fluorescence intensity; both native and enhanced, were carefully studied to reach the optimum conditions of measurements. The proposed spectrofluorimetric methods were validated in accordance with ICH guidelines and were successfully applied for the determination of SER in bulk powder and pharmaceutical preparation with high sensitivity and stability indicating power. They were also statistically compared to the manufacturer methods with no significant difference in performance.

Sensitive spectrofluorimetric methods for determination of ethopabate and amprolium hydrochloride in chicken plasma and their residues in food samples.

Two sensitive and selective spectrofluorimetric methods are proposed to determine ethopabate (ETH) and amprolium hydrochloride (AMP). First derivative synchronous spectrofluorimetry determines the natively fluorescent ethopabate at 288 nm in presence of amprolium hydrochloride which is a non fluorescent quaternary compound with average recovery 100.54±0.721 over a concentration range of 0.01-0.8 µg/mL. Limits of detection (LOD) and quantification (LOQ) are 0.002 and 0.007 µg/mL, respectively. The second method is direct synchronous spectrofluorimetry for determining amprolium hydrochloride at 362 nm after a reaction with 5% NaOH and 0.08% potassium ferricyanide that is optimized by a two-level factorial design. This method is linear over a concentration range of 0.01-0.65 µg/mL with average recovery 99.4±1.28. Limits of detection (LOD) and quantification (LOQ) are 0.002 and 0.006 µg/mL, respectively. The proposed methods are found to be valid and applicable for the analysis of ETH and AMP in their veterinary formulation. They are successfully applied to determine the studied drugs in chicken plasma and their residues in chicken muscle, liver, egg and chicken-based baby food product with recoveries in the ranges of 95.71-108.73% and 97.36-111.89% and for ETH and AMP, respectively.

New methods for amlodipine and valsartan native spectrofluorimetric determination, with factors optimization study.

Four native fluorescence methods were suggested for simultaneous determination of amlodipine (AML) and valsartan (VAL). These methods were based on excitation of both drugs at λ(ex) 300 nm, in one step, to give maximum emission at λ(em) 378 and 496 nm for AML and VAL, respectively. The first method, single λ(ex) method, was used without any additions. The sensitivity of this method was further increased by the addition of hydroxy propylmethyl cellulose (HPMC) surfactant, ß-cyclodextrin, or ferric oxide magnetite nanoparticles, in the other three methods. Different types of surfactants, and different concentration levels of both ß-cyclodextrin and ferric oxide nanoparticles, were scanned to determine the optimum conditions for enhancing the sensitivity. Some factors affecting the fluorescence intensity of both cited drugs, like the type and volume of the added solvent (to be used as a sensing agent), and pH of measurement were studied and optimized. The proposed methods could be used in determination of AML and VAL in bulk powder, their laboratory prepared mixtures and pharmaceutical formulations. The obtained results were statistically compared to each other and to that of some reported methods. The specificity of the developed methods was investigated, and the methods were validated according to ICH guidelines.

Comparative study of 2-hydroxy propyl beta cyclodextrin and calixarene as ionophores in potentiometric ion-selective electrodes for neostigmine bromide.

Three novel neostigmine bromide (NEO) selective electrodes were investigated with 2-nitrophenyl octyl ether as a plasticiser in a polymeric matrix of polyvinyl chloride (PVC). Sensor 1 was fabricated using tetrakis(4-chlorophenyl)borate (TpClPB) as an anionic exchanger without incorporation of an ionophore. Sensor 2 used 2-hydroxy propyl ß-cyclodextrin as an ionophore while sensor 3 was constructed using 4-sulfocalix-8-arene as an ionophore. Linear responses of NEO within the concentration ranges of 10(-5) to 10(-2), 10(-6) to 10(-2) and 10(-7) to 10(-2) mol L(-1) were obtained using sensors 1, 2 and 3, respectively. Nernstian slopes of 51.6 ± 0.8, 52.9 ± 0.6 and 58.6 ± 0.4 mV/decade over the pH range of 4-9 were observed. The selectivity coefficients of the developed sensors indicated excellent selectivity for NEO. The utility of 2-hydroxy propyl ß-cyclodextrin and 4-sulfocalix[8]arene as ionophores had a significant influence on increasing the membrane sensitivity and selectivity of sensors 2 and 3 compared to sensor 1. The proposed sensors displayed useful analytical characteristics for the determination of NEO in bulk powder, different pharmaceutical formulations, and biological fluids (plasma and cerebrospinal fluid (CSF)) and in the presence of its degradation product (3-hydroxyphenyltrimethyl ammonium bromide) and thus could be used for stability-indicating methods.

Stability-indicating spectrophotometric and spectrodensitometric methods for the determination of diacerein in the presence of its degradation product.

Three sensitive, selective, and precise stability-indicating methods for the determination of the novel osteoarthritis drug, diacerein (DIA) in the presence of its alkaline degradation product (active metabolite, rhein) and in pharmaceutical formulation were developed and validated. The first method is a first derivative (D(1) ) spectrophotometric one, which allows the determination of DIA in the presence of its degradate at 322 nm (corresponding to zero crossing of the degradate) over a concentration range of 4-40 µg/mL with mean percentage recovery 100.21 ± 0.833. The second method is the first derivative of the ratio spectra (DD(1) ) by measuring the peak amplitude at 352 nm over the same concentration range as (D(1) ) spectrophotometric method, with mean percentage recovery 100.09 ± 0.912. The third method is a TLC-densitometric one, where DIA was separated from its degradate on silica gel plates using ethyl acetate:methanol:chloroform (8:1.5:0.5 v:v:v) as a developing system. This method depends on quantitative densitometric evaluation of thin layer chromatogram of DIA at 340 nm over a concentration range of 1-10 µg/spot, with mean percentage recovery 100.24 ± 1.412. The selectivity of the proposed methods was tested using laboratory-prepared mixtures. The proposed methods have been successfully applied to the analysis of DIA in pharmaceutical dosage forms without interference from other dosage form additives and the results were statistically compared with reference method.

Spectrophotometric and spectrodensitometric methods for the determination of rivastigmine hydrogen tartrate in presence of its degradation product.

Three sensitive, selective and precise stability-indicating methods for the determination of the anti-Alzheimer's drug, rivastigmine hydrogen tartrate (RIV) in the presence of its alkaline degradation product (major metabolite, NAP 226-90) and in pharmaceutical formulation were developed and validated. The first method is a second derivative (D(2)) spectrophotometric one, which allows the determination of RIV in the presence of its degradate at 262 nm (corresponding to zero crossing of the degradate) over a concentration range of 50-500 microg/ml with mean percentage recovery 100.18 +/- 0.628. The second method is the first derivative of the ratio spectra (DD(1)) by measuring the peak amplitude at 272 nm over the same concentration range as (D(2)) spectrophotometric method, with mean percentage recovery 99.97 +/- 0.641. The third method is a TLC-densitometric one, where RIV was separated from its degradate on silica gel plates using methanol:butanol:H(2)O:ammonia (5:4:1:0.01 v:v:v) as a developing system. This method depends on the quantitative densitometric evaluation of thin layer chromatogram of RIV at 263 nm over a concentration range of 20-160 microg/spot, with mean percentage recovery 100.19 +/- 1.344. The selectivity of the proposed methods was tested using laboratory-prepared mixtures. The proposed methods have been successfully applied to the analysis of RIV in pharmaceutical dosage forms without interference from other dosage form additives and the results were statistically compared with reference method.