Magnetized cubic zinc MOFs for efficient removal of hazardous cationic and anionic dyes in aqueous solutions.

A significant amount of dye runoff and aqueous waste are released from the manufacturing process of dyes with intense and permanent colors, which are undesirable from a cultural and ecological aspect. In this paper, we present a green, simple, low-effort, and energy-efficient method of creating magnetized cubic Zn-MOFs for the adsorption and elimination of various organic dyes. Magnetic iron oxide materials with a hierarchical structure were loaded and doped into cubic zinc metal-organic frameworks (MDLZ). High magnetic characteristics, chemical stability, minimal toxicity, and ease of removing various dyes from aqueous effluents are all exhibited by the developed MDLZ adsorbent. To assess MDLZ's capacity to adsorb organic dyes from an aqueous solution, organic dyes such as Crystal Violet (CV), Neutral Red (NR), and Congo Red (CR) were used as model materials. Many adsorption factors were examined, including temperature, pH, contact time, initial concentration, and adsorbent dosage. Under optimal elimination circumstances, MDLZ was utilized to evaluate the kinetic, thermodynamic, and isotherm models for the adsorption of CR, NR, and CV dyes. The adsorption capacity (q m) of the MDLZ adsorbent at 25 °C was 39.37 mg g-1 for CV, 239.81 mg g-1 for CR, and 321.54 mg g-1 for NR, which is significantly higher than those of other adsorbents reported. The magnetized nanocubes' large surface area and uniform micropores enabled them to eliminate a large number of organic dyes from wastewater effectively, and their strong adsorption capability persisted even after four reuse cycles. The microporous MLDZ adsorbent offers a simple and effective method for handling industrial effluents and filtration of water.

Effective adsorption of fluorescent congo red azo dye from aqueous solution by green synthesized nanosphere ZnO/CuO composite using propolis as bee byproduct extract.

The indirect dumping of massive volumes of toxic dyes into water has seriously affected the ecosystem. Owing to the many applications of the designed nanomaterials in the manufacturing process, there is a lot of research interest in synthesizing nanomaterials using green processes. In this research, the byproduct of bee was employed to synthesize nanoparticles (NPs) of ZnO, CuO, and biosynthesized ZnO/CuO (BZC) nanocomposite via utilizing a green and simple approach. To validate the effective fabrication of BZC nanocomposite, various characterization measurements were applied. FTIR analysis identified the functional groups in charge of producing nanoparticles and nanocomposites. Moreover, the existence of ZnO and CuO XRD peaks suggests that the nanocomposites were successfully biosynthesized. The high-resolution XPS spectrum of the BZC nanocomposite's Zn2p3, Cu2p3, and O1s were observed. Our findings indicate the successful engineering of the prepared nanomaterials and BZC nanocomposite. Our findings indicate the successful engineering of the prepared nanomaterials and BZC nanocomposite. For Congo red (CR) fluorescent stain azo dye elimination in water, all adsorption parameters were examined at room temperature. Moreover, the adsorption experiments revealed the removal capacity for uptake CR dye using BZC nanocomposite (90.14 mg g-1). Our results show that the BZC nanocomposite exhibited high removal capability for the adsorption of CR dye. The nanosphere adsorbent offered a simple, low-cost, and green approach for water purification and industrial wastewater control.

Recent Development of Metal-Organic Frameworks for Water Purification.

Water contamination is an increasing concern to mankind because of the increasing amount of pollutants in aquatic ecosystems. To purify the polluted water, various techniques have been used to remove hazardous components. Unfortunately, traditional cleanup techniques with a low uptake capacity are unable to achieve water purification. Metal-organic frameworks (MOFs) have recently shown potential in effective water pollutant isolation in terms of selectivity and adsorption capacity over traditional porous materials. The high surface area and versatile functionality of MOFs allow for the development of new adsorbents. The development of MOFs in a range of water treatments in the recent five years will be highlighted in this review, along with assessments of the adsorption performance relevant to the particular task. Moreover, the outlook on future opportunities for water purification using MOFs is also provided.

Ultrasensitive Visual Tracking of Toxic Cyanide Ions in Biological Samples Using Biocompatible Metal-Organic Frameworks Architectures.

The extraordinary accumulation of cyanide ions within biological cells is a severe health risk. Detecting and tracking toxic cyanide ions within these cells by simple and ultrasensitive methodologies are of immense curiosity. Here, continuous tracking of ultimate levels of CN--ions in HeLa cells was reported employing biocompatible branching molecular architectures (BMAs). These BMAs were engineered by decorating colorant-laden dendritic branch within and around the molecular building hollows of the geode-shelled nanorods of organic-inorganic Al-frameworks. Batch-contact methods were utilized to assess the potential of hollow-nest architecture for inhibition/evaluation of toxicant CN--ions within HeLa cells. The nanorod BMAs revealed significant potential capabilities in monitoring and tracking of CN- ions (88 parts per trillion) in biological trials within seconds. These results demonstrated sufficient evidence for the compatibility of BMAs during HeLa cell exposure. Under specific conditions, the BMAs were utilized for in-vitro fluorescence tracking/sensing of CN- in HeLa cells. The cliff swallow nest with massive mouths may have the potential to reduce the health hazards associated with toxicant exposure in biological cells.

Novel Indoline Spiropyrans Based on Human Hormones ß-Estradiol and Estrone: Synthesis, Structure, Chromogenic and Cytotoxic Properties.

The introduction of a switchable function into the structure of a bioactive compound can endow it with unique capabilities for regulating biological activity under the influence of various types of external stimuli, which makes such hybrid compounds promising objects for photopharmacology, targeted drug delivery and bio-imaging. This work is devoted to the synthesis and study of new spirocyclic derivatives of important human hormones-ß-estradiol and estrone-possessing a wide range of biological activities. The obtained hybrid compounds represent an indoline spiropyrans family, a widely known class of organic photochromic compounds. The structure of the compounds was confirmed by 1H and 13C NMR, IR, HRMS and single-crystal X-ray analysis. The intermolecular interactions in the crystals of spiropyran (3) were defined by Hirshfeld surfaces and 2D fingerprint plots, which were successfully acquired from CrystalExplorer (v21.5). All target hybrids demonstrated pronounced activity in the visible region of the spectrum. The mechanisms of thermal isomerization processes of spiropyrans and their protonated merocyanine forms were studied by DFT methods, which revealed the energetic advantage of the protonation process with the formation of a ß-cisoid CCCH conformer at the first stage and its further isomerization to more stable ß-transoid forms. The proposed mechanism of acidochromic transformation was confirmed by the additional NMR study data that allowed for the detecting of the intermediate CCCH isomer. The study of the short-term cytotoxicity of new spirocyclic derivatives of estrogens and their 2-formyl-precursors was performed on the HeLa cell model. The precursors and spiropyrans differed in toxicity, suggesting their variable applicability in novel anti-cancer technologies.

New cationic spiropyrans with photoswitchable NIR fluorescence.

Visible-light-mediated photochromic compounds with NIR absorption and fluorescence are of great interest for use in different biomedical applications. In this work, new representatives of spiropyrans with conjugated cationic 3H-indolium substituents in different positions of 2H-chromene moiety were synthesized. The electron-donating methoxy groups were introduced in the uncharged indoline and charged indolium cycles to form the effective conjugation chain between the hetarene moiety and the cationic fragment for reaching NIR absorption and fluorescence. The molecular structure and the effects of cationic fragment position on the mutual stability of the spirocyclic and merocyanine forms of compounds were carefully studied in the solutions and solid state by NMR, IR, HRMS, single-crystal XRD, and quantum chemical calculations. It was found that the obtained spiropyrans demonstrate positive or negative photochromism depending on the cationic fragment's position. One of spiropyrans has shown bidirectional photochromic properties induced exclusively by visible light of different wavelengths in both directions. The photoinduced merocyanine forms of compounds possessed far-red shifted absorption maxima and NIR fluorescence, which makes them prospective fluorescent probes for bioimaging.

Multi-responsive paper chemosensors based on mesoporous silica nanospheres for quantitative sensing of heavy metals in water.

Exposure to low concentrations of heavy metal cations seriously harms living organisms, hence they are considered environmental toxins. Portable simple detection systems are required for field monitoring of multiple metal ions. In this report, paper-based chemosensors (PBCs) were prepared by adsorbing 1-(pyridin-2-yl diazenyl) naphthalen-2-ol (chromophore), which recognizes heavy metals, onto filter papers coated with mesoporous silica nano spheres (MSNs). The high density of the chromophore probe on the surface of PBCs resulted in ultra-sensitive optical detection of heavy metal ions and short response time. The concentration of metal ions was determined using digital image-based colorimetric analysis (DICA) and compared to spectrophotometry under optimal sensing conditions. The PBCs exhibited stability and short recovery times. The detection limits determined using DICA of Cd2+, Co2+, Ni2+ and Fe3+ were 0.22, 0.28, 0.44, and 0.54 µM; respectively. Additionally, the linear ranges for monitoring Cd2+, Co2+, Ni2+ and Fe3+ were 0.44-4.4, 0.16-4.2, 0.8-8.5, and 0.002-5.2 µM; respectively. The developed chemosensors showed high stability, selectivity, and sensitivity for sensing of Cd2+, Co2+, Ni2+ and Fe3+ in water under optimum conditions and hold potential for low cost, onsite sensing of toxic metals in water.

A Modern Look at Spiropyrans: From Single Molecules to Smart Materials.

Photochromic compounds of the spiropyran family have two main isomers capable of inter-switching with UV or visible light. In the current review, we discuss recent advances in the synthesis, investigation of properties, and applications of spiropyran derivatives. Spiropyrans of the indoline series are in focus as the most promising representatives of multi-sensitive spirocyclic compounds, which can be switched by a number of external stimuli, including light, temperature, pH, presence of metal ions, and mechanical stress. Particular attention is paid to the structural features of molecules, their influence on photochromic properties, and the reactions taking place during isomerization, as the understanding of the structure-property relationships will rationalize the synthesis of compounds with predetermined characteristics. The main prospects for applications of spiropyrans in such fields as smart material production, molecular electronics and nanomachinery, sensing of environmental and biological molecules, and photopharmacology are also discussed.

Optical chemosensors for environmental monitoring of toxic metals related to Alzheimer's disease.

Alzheimer's disease (AD) is the most common type of dementia and progresses from mild memory loss to severe decline in thinking, behavioral and social skills, which dramatically impairs a person's ability to function independently. Genetics, some health disorders and lifestyle have all been connected to AD. Also, environmental factors are reported as contributors to this illness. The presence of heavy metals in air, water, food, soil and commercial products has increased tremendously. Accumulation of heavy metals in the body leads to serious malfunctioning of bodily organs, specifically the brain. For AD, a wide range of heavy metals have been reported to contribute to its onset and progression and the manifestation of its hallmarks. In this review, we focus on detection of highly toxic heavy metals such as mercury, cadmium, lead and arsenic in water. The presence of heavy metals in water is very troubling and regular monitoring is warranted. Optical chemosensors were designed and fabricated for determination of ultra-trace quantities of heavy metals in water. They have shown advantages when compared to other sensors, such as selectivity, low-detection limit, fast response time, and wide-range determination under optimal sensing conditions. Therefore, implementing optical chemosensors for monitoring levels of toxic metals in water represents an important contribution in fighting AD.

Monitoring of Cobalt and Cadmium in Daily Cosmetics Using Powder and Paper Optical Chemosensors.

Daily used cosmetics may contain high levels of heavy metals which are added to improve the quality and shine of cosmetics but represent a threat to human health. In this report, powder- and paper-based optical nanosensors using mesoporous silica nanospheres as carriers were designed for determination of Co2+ and Cd2+ in commonly used cosmetics. Powder optical chemosensors (POCs) were prepared via direct decoration of optical probes into a porous carrier. Paper-based chemosensors (PBCs) were designed via adsorbing the organic chromophore onto filter papers treated with mesoporous silica. POCs and PBCs were constructed with thick decoration of optical probes, leading to the formation of active surface centers for monitoring of Co2+ and Cd2+ in cosmetic products. The uniform structures of POCs and PBCs have resulted in selective sensing and low detection limits up to parts per billion, wide detection range determination, and fast response (on the order of seconds). Digital image colorimetric analysis (DICA) was used to quantify the color of PBCs and deduce the corresponding concentrations of Co2+ and Cd2+ using calibration curves. DICA data correlated well with that obtained from UV-vis spectrophotometry. The developed POCs and PBCs showed wide detection ranges of metal ions and a considerably low detection limit under optimal analysis conditions. The low limit of detection of Co2+ and Cd2+ ions using POCs was 6.7 × 10-9 and 3.5 × 10-9 M, respectively. To the best of our knowledge, this is the first time simple PBCs have been designed for monitoring Co2+ and Cd2+ with detection limits of 2.2 × 10-7 and 1.3 × 10-7 M. A limited amount of manufactured POCs (about 20 mg) were used for all measurements, and commercial filter paper treated with mesoporous nanosphere silica was used for sensing Co2+ and Cd2+ ions. The developed optical chemosensors had short regeneration times and exhibited high stability and surface functionality and are capable of monitoring Co2+ and Cd2+ in various cosmetic products.

Broccoli-shaped biosensor hierarchy for electrochemical screening of noradrenaline in living cells.

Monitoring and determination of ultra-trace concentrations of monoamine neurotransmitter such as noradrenaline (NA) in living cells with simple, sensitive and selective assays are significantly interesting. We design NA-electrode sensing system based on C-, N-doped NiO broccoli-like hierarchy (CNNB). The spherical broccoli-head umbrella architectures associated with nano-tubular arrangements enabled to tailor NA biosensor design. The homogenous doping and anisotropic dispersion of CN nanospheres along the entire NB head nanotubes lead to creating of abundant electroactive sites in the interior tubular vessels and outer surfaces for ultrasensitive detection of NA in living cells such as PC12. The CNNB biosensor electrodes showed efficient electrocatalytic activity, enhanced kinetics for electrooxidation of NA, and fast electron-transfer between electrode-electrolyte interface surfaces, enabling synergistic enhancement in sensitivity, and selectivity at a low-detectable concentration of ∼ 6nM and reproducibility of broccoli-shaped NA-electrodes. The integrated CNNB biosensor electrodes showed evidence of monitoring and screening of NA released from PC12 cells under K+ ion-extracellular stimulation process. The unique features of CNNB in terms of NA-selectivity among multi-competitive components, long-term stability during the detection of NA may open their practical, in-vitro application for extracellular monoamine neurotransmitters detection in living cells.